• 소성∙가공
• /
• 제4권4호
• /
• pp.335-344
• /
• 1995

In this paper, an experimental study of a hot forging process is carried out using plasticine and the die set manufactured with the aid of rapid prototyping. In order to manufacture the die set, Stereolithography Apparatus(SLA) which is most widely used rapid prototyping system is introduced. Turbine blade forging is performed using palsticine and the SLA prototype die set. Through the experiment, it has been shown that SLA prototype is suitable to the die set for the plasticine workpiece, and the formability and the forming load of turbine blade forging are predicted.

• KSTLE International Journal
• /
• 제1권1호
• /
• pp.59-62
• /
• 2000

This paper deals with an experimental study on the dynamic response of an elastomeric oil seal when the interferences between shaft and lip as well as the dynamic eccentricities are present. The dynamic response of seal lip in oil seals was observed with the aid of an image processing apparatus. The temperature of the seal lip edge, friction torque and the dynamic sealing gap between shaft and lip are measured at different conditions of the initial interference and the shaft eccentricity, The data were simultaneously measured under dynamic conditions. Experimental results show that, as the shaft speed is increased, S/e$_{d}$ has nearly reached a constant asymptotic value fur a certain range of shaft speeds. The results indicate that the gap separation between shaft and lip is provided due to the shaft eccentricity because the seal lip cannot follow quickly the radial displacements with increasing shaft speed.d.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.279-293
• /
• 2009

Quantitative risk assessments are related to implementing hazard analysis and critical control points (HACCP) by its potential involvement in identifying critical control points (CCPs), validating critical limits at a CCP, enabling rational designs of new processes, and products to meet required level of safety, and evaluating processing operations for verification procedures. The quantitative risk assessment is becoming a standard research tool which provides useful predictions and analyses on microbial risks and, thus, a valuable aid in implementing a HACCP system. This paper provides a review of microbial modeling in quantitative risk assessments, which can be applied to HACCP systems.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.72-73
• /
• 2003

In volume holographic memory (VHM), two-dimensional data array (i.e. data page) is used for the recording and the retrieving process with the aid of spatial light modulator (SLM) and CCD camera. Due to this two-dimensional parallel data processing, burst errors in this system also have two-dimensional characteristics in a data page domain. In this paper, we present a channel model of the burst noise and burst error for the VHM system using disk type recording media. (omitted)

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1132-1133
• /
• 2006

Metal-bonded diamond impregnated tools are being increasingly used in the processing of stone and ceramics, road repair, petroleum exploration, etc. Although the main tool wear mechanisms have been identified, the scientific background is inadequate and fundamental research has to be carried out to better understand the tool field behaviour. This work addresses the complex issues of modelling abrasive wear of the metallic matrix under laboratory conditions. The generated data indicates that the matrix wear resistance can be assessed in a simple manner; whereas tests carried out on diamond impregnated specimens may aid prediction of the tool life in abrasive applications.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.617-618
• /
• 2015

본 논문은 농업의 계획, 생산, 유통 및 마케팅 분야에 이르기까지 체계적인 생산 및 활용을 위한 환경조성에 관한 스마트기본구조로 계획단계(pre-production stage), 생산단계(Production stage), 유통 및 마케팅단계(post-production stage)로 구분하여 서술하였다. ICT기반의 스마트 농업의 모형을 기반으로 하여 농산물에 IT 기술을 적용하여 생산성 향상을 표준화를 목표로 구조 및 절차를 기술한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.611-614
• /
• 2015

IT 와 농업분야의 융합은 생산, 유통, 소비 분야에서의 효율과 질적 향상을 기대하게 되었고 특히 IT 영역의 정보 분석 기술과 자동제어 기술은 농산물 생산에 많은 장점을 제공하게 되었다. 본 논문에서는 IT와 접목한 스마트 농업 환경에서의 ICT 표준화 로드맵을 제시한다.

• 치과방사선
• /
• 제28권1호
• /
• pp.73-85
• /
• 1998

The purpose of this study was to aid in the use of the digital images by edge-detect interpolation for direct digital periapical images using edge-detect interpolation. This study was performed by image processing of 20 digital periapical images; pixel replication, linear non-interpolation, linear interpolation. and edge-sensitive interpolation. The obtained results were as follows : 1. Pixel replication showed blocking artifact and serious image distortion. 2. Linear interpolation showed smoothing effect on the edge. 3. Edge-sensitive interpolation overcame the smoothing effect on the edge and showed better image.

• 지능정보연구
• /
• 제3권2호
• /
• pp.93-104
• /
• 1997

The major economic health problem of dairy cattle is mastitis which can affect 10 to 50% of cow-quarters. This health problem is difficult for many dairy farmers and health advisors to understand, diagnose and control. Without special laboratory testing, most mastitis is overlooked. Estimates of annual mastitis cast per cow vary from $50 to $200. For the nearly 9 million cows in the United States, annual loss to the dairy industry amounts to over one billion. A knowledge-based decision aid has been developed to evaluate mastitis data retrieved electronically from two of nine U. S. regional dairy records processing centers. Heuristic rules to diagnose herd mastitis problems were collected and incorporated into the system from various domain experts. This system information. It allows users to select mastitis control schemes with various degrees of aggressiveness and teaches commonly accepted mastitis control practices.

• Applied Microscopy
• /
• 제45권3호
• /
• pp.131-134
• /
• 2015

Here we show how by processing energy dispersive X-ray spectrometry (EDS) data obtained using highly sensitive, new generation EDS detectors in the AZtec LayerProbe software we can obtain data of sufficiently high quality to non-destructively measure the number of layers in two-dimensional (2D) $MoS_2$ and $MoS_2/WSe_2$ and thereby enable the characterization of working devices based on 2D materials. We compare the thickness measurements with EDS to results from atomic force microscopy measurements. We also show how we can use electron backscatter diffraction (EBSD) to address fabrication challenges of 2D materials. Results from EBSD analysis of individual flakes of exfoliated $MoS_2$ obtained using the Nordlys Nano detector are shown to aid a better understanding of the exfoliation process which is still widely used to produce 2D materials for research purposes.