• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.130-137
• /
• 2006

The HDD(hard disk drive) using Load/unload(L/UL) technology includes the benefits which are increased areal density, reduced power consumption and improved shock resistance than those of contact-start-stop(CSS). It has been widely used in portable hard disk drive and will become the key technology for developing the small form factor hard disk drive. The main objects of L/UL are no slider-disk contact or no media damage. For realizing those, we must consider many design parameters in L/UL system. In this paper, we focus on lift-off force. The 'lift-off' force, defined as the minimum air bearing force, is another very important indicator of unloading performance. A large amplitude of lift-off force increases the ramp force, the unloading time, the slider oscillation and contact-possibility. To minimize 'lift-off' force we optimizes the slider and suspension using the integrated optimization frame, which automatically integrates the analysis with the optimization and effectively implements the repetitive works between them. In particular, this study is carried out the optimal design considering the process of modes tracking through the entire optimization processes. As a result, we yield the equation which can easily find a lift-off force and structural optimization for suspension.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.350-359
• /
• 2005

Finite element method is a very effective method to simulate the forming processes with good prediction of the deformation behaviour. For the finite element modeling of sheet mental forming the accurate die model is required. Among finite element method, the static-implicit finite element method is applied effectively to analyze real-size auto-body panel stamping processes, which include the forming stage. This study is about analyzing the stamping process problems by using AutoForm commercial software which used static-implicit method. According to this study, the results of simulation will give engineers good information to access the die design of optimization.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.199-202
• /
• 2001

This article deals with stochastic reliability systems that include a repair facility and unreliable machines: the main facility of working and an auxiliary facility of "super-reserve" machines. The number of super-reserve machines are random number with a arbitrarily distribution and working machines break down exponentially. Defective machines line up for repair, whose durations are arbitrarily distributed. Refurbished machines return to the main facility. If the main facility is restored to its original quantity, the repair facility leaves on routine maintenance until all of super-reserve machines are exhausted. Then, the busy period is regenerated. The whole system also falls into the category of closed queues, with more options than those of basic models. The techniques include two-variate Markov and semi-regenerative processes, and a duality principle, to find the probability distribution of the number of intact machines. Explicit formulas obtained demonstrate a relatively effortless use of functionals of the main stochastic characteristics (such as expenses due to repair, maintenance, waiting, and rewards for higher reliability) and optimization of their objective function. Applications include computer networking, human resources, and manufacturing processes.

• 자원환경지질
• /
• 제28권4호
• /
• pp.425-431
• /
• 1995

Genetic algorithms are so named because they are analogous to biological processes. The model parameters are coded in binary form. The algorithm then starts with a randomly chosen population of models called chromosomes. The second step is to evaluate the fitness values of these models, measured by a correlation between data and synthetic for a particular model. Then, the three genetic processes of selection, crossover, and mutation are performed upon the model in sequence. Genetic algorithms share the favorable characteristics of random Monte Carlo over local optimization methods in that they do not require linearizing assumptions nor the calculation of partial derivatives, are independent of the misfit criterion, and avoid numerical instabilities associated with matrix inversion. An additional advantage over converntional methods such as iterative least squares is that the sampling is global, rather than local, thereby reducing the tendency to become entrapped in local minima and avoiding the dependency on an assumed starting model.

• 품질경영학회지
• /
• 제34권1호
• /
• pp.13-19
• /
• 2006

Data mining is a useful tool for analyzing data from different perspectives and for summarizing them into useful information. Recently, the data mining methods are applied to solving quality problems of the manufacturing processes. This paper discusses the problems of construction of a quality mining system, which is based on the various data mining methods. The quality mining system includes recipe optimization, significant difference test, finding critical processes, forecasting the yield. The contents and system of this paper are focused on the TFT-LCD manufacturing process. We also provide some illustrative field examples of the quality mining system.

• 대한전자공학회논문지
• /
• 제14권4호
• /
• pp.22-31
• /
• 1977

최적회로설계에서 step크기 결정과 관련된 오차함수의 Hessian Matrix가 직접적으로 명백히 결정될 수 있도록 일반식을 유도해서 Hessian Matrix를 포함한 최적화 과정에 사용 가능하도록 하였다. 예로서 설계한 결과가 Fltecher-Powell에 의한 결과보다 최소를 찾는 과정이 훨씬 가속화되었다. 또한 담소평면상에서 Pole-zero 위치를 조정하여 크기와 위상을 동시에 고려한 최적회로설계를 할수 있도록 하였다.

• 한국공작기계학회논문집
• /
• 제15권6호
• /
• pp.38-43
• /
• 2006

A slot cut in end milling processes is one of the laborious works because the cutting force is likely to deflect the tools excessively, then to make large errors or to fracture the tool. This difficulty is owing to the poor stiffness of slender shaped end mills. Though, in most cases, additional finish cuts are followed after rough cuts, the accuracy of rough cuts is still important because it affects the final accuracy after finish cuts and productivity. The accuracy in slot cuts depends on the tool stiffness and the cutting conditions including depth of cut and feed. In order to meet the desired accuracy, diameter of end mill and cutting allowance have to be selected carefully. This study suggests several guidances for selecting the end mill diameter and the slot cut allowance to improve machining accuracy and productivity in slot end millings. Some experiments were done with the various cutting parameters of tool diameter, depth of cut and feed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1993년도 수공학연구발표회논문집
• /
• pp.3-26
• /
• 1993

I have briefly described some of the important advances in hydrosystems and to remark on the important scientific research priorities in hydrological sciences. We have concentrated on data collection systems, real-time control of hydrosystems, global climate change and decision support systems and GIS. In summary, I would like to stress the following points: - the advances in data collection systems, advanced methodologies for interfacion hydrologic, hydraulic, and optimization models through optimal control approaches; and the advances in decision support systems and GIS will allow the interfacing of all these technologies into some sophisticated and much needed tools for operating hydrosystems; - the ability to better understand the hydrologic processes and their relationships to other earth processes is important to understanding and modelling of the hydrologic cycle and its interactions with the ocean-atmosphere system; - and the solution to a better understanding of hydrologic sciences needs to be an international effort such as the GEWEX program briefly discussed above. I would like to thamk each of you for listening to my lecture and to once again thank those responsible for me being here today. Thank you.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.54-58
• /
• 1994

H$_2$ bake and GeH$_4$ clean are used as a in-situ pre-clean method in low temperature Si based epitaxial growth technology using rapid thermal processing chemical vapor deposition (RTPCVD). In this paper, the H$_2$ bake and GeH$_4$ clean processes are optimized for low surface defect density using Taguchi method. In H$_2$ bake process, the epitaxial growth temperature affects dominantly on the surface defect density, and the next affecting factors are H$_2$ bake temperature and rinse time in de-ionised water. In GeH$_4$ clean process, GeH$_4$ clean temperature affects most strongly on the surface defect density, and the minor factor is GeH$_4$flow rate. The optimum process conditions predicted fly Taguchi method agree well with tile experimental data in both in-situ clean processes.

• 상하수도학회지
• /
• 제29권2호
• /
• pp.155-163
• /
• 2015

Many advanced treatment processes have been introduced to WTPs, however, the consumer confidence on tap water is still low and the percentage of drinking water directly from the tap is less than 2 %. One of the methods to improve the credibility of tap water is to introduce a drinking water certification system. By introducing the system, water treatment processes can be optimized, which in turn, can significantly improve drinking water quality. In this paper, 6 water quality parameters(i.e., turbidity, CT, residual chlorine, geosmin, 2-MIB, Mn) which have significant influences on tap water quality and consumer confidence were identified, and their recommended guidelines were proposed. 3-Star or 5-Star certification can be awarded to the WTPs which have met the certification criteria. The drinking water certification system can be carried out as a voluntary program among drinking water suppliers.