• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.713-722
• /
• 2007

Design variables for suspension systems cannot always be realized in the actual suspension systems due to tolerances in manufacturing and assembly processes. In order to deal with these tolerances, design variables associated with kinematic configuration and compliance characteristics of suspensions are treated as random variables. The reliability of a design target with respect to a design variable is defined as the probability that the design target is in the acceptable design range for all possible values of the design variable. To compute reliability, the limit state, which is the boundary between the acceptable and unacceptable design, is expressed mathematically by a limit state function with value greater than 0 for acceptable design, and less than 0 for unacceptable design. Through reliability analysis, the acceptable range of design variables that satisfy a reliability target is specified. Furthermore, through sensitivity analysis, a general procedure for optimization of the design target with respect to the design variables has been established.

• 통합자연과학논문집
• /
• 제13권3호
• /
• pp.92-96
• /
• 2020

Taguchi's robust parameter design is an approach to reduce the performance variation of quality characteristics in products and processes. In robust design, the signal-to-noise ratio (SN ratio) was used to find the optimum condition to minimize the variation of quality characteristics as much as possible and bring the average of quality characteristics closer to the target value. In this paper, we propose a simultaneous optimization method based on a linear model of the SN ratio as a method to find the optimal condition of the control factor in case of multi-characteristics. In addition, the proposed method and the existing method were compared and studied by taking actual cases.

• 펄프종이기술
• /
• 제36권3호
• /
• pp.83-90
• /
• 2004

Pulp mold is one of the famous environmental friendly materials, which made from re cycled materials such as old newsprints through the environmental friendly processes. Furthermore, the used pulp mold can be easily recycled and the pulp mold itself is biodegradable. However, the higher cost and some deficiency in physical properties of pulp mold have been considered as issues to be overcome for a substitute for polymeric packaging materials such as EPS (Expandable Polystyrene). The way for the optimization of a pulp mold mill was proposed in this report. The possible reduction of drying energy was calculated by using a computer simulation method, which could Provide the detailed information about mass balance of overall process. The simulated results showed a great possible curtailment of production cost by improving the forming systems, for example, increasing the temperature and the dryness of a wet pulp mold.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.484-494
• /
• 2005

Finite element method is very effective method to simulate the forming processes with good prediction of the deformation behaviour. For the finite element modeling of sheet mental forming the accurate tool model is required. Due to the geometrical complexity of real-size part stamping tools it is hard to make FE model for real-size auto-body stamping parts. In this paper, it was focussed on the drawability factors on auto-body panel stamping by AUTOFORM with using tool planing alloy to reduce law price as well as high precision from Design Optimization of die. According to this study, the results of simulation will give engineers good information to access the Design Optimization of die.

• Journal of the Korean Data and Information Science Society
• /
• 제12권1호
• /
• pp.11-18
• /
• 2001

다구찌가 제안한 파라미터 설계는 제품설계나 공정설계 단계에서 품질특성치의 수행변동(performance variation)을 줄이는데 있다. 파라미터 설계에서 품질평균 근처에서 품질의 변동을 줄일 수 있는 최적조건을 찾는데 있어서 신호대 잡음비(Signal-to-noise ratio; SN비)라는 수행측도(performance measure)를 사용하였다. 그러나 많은 통계학자들은 SN비를 이용한 다구찌 분석 기법을 비판한다. 본 논문에서는 파라미터 설계를 위한 최적조건을 찾는데 있어서 SN비를 사용하지 않는 보다 실질적인 최적방안을 제안한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.138-141
• /
• 2004

Finite element method is very effective method to simulate the forming processes with good prediction of the deformation behaviour. For the finite element modeling of sheet mental forming the accurate tool model is required. Due to the geometrical complexity of real-size part stamping tools it is hard to make FE model for real-size auto-body stamping parts. In this paper, it was focussed on the drawability factors on auto-body panel stamping by AUTOFORM with using tool planing alloy to reduce law price as well as high precision from Design Optimization of die. According to this study, the results of simulation will give engineers good information to access the Design Optimization of die.

• 품질경영학회지
• /
• 제27권2호
• /
• pp.237-250
• /
• 1999

Response surface analysis has been a popular tool conducted by engineers in many processes. In this paper, response surface function, named partial least squares response surface function is proposed. Partial least squares response surface function is a function of partial least squares components and the response surface modeling is used in either a first-order or a second-order model. Also, this approach will have the engineers be able to do the response surface modeling and the process optimization even when the number of experimental runs is less than the number of model parameters. This idea is applied to the nondesign data and an application of partial least squares response surface function to the process optimization is considered.

• 전산구조공학
• /
• 제5권2호
• /
• pp.93-104
• /
• 1992

최적화기법의 최종목표는 전체최적점(golbal optimum point)을 정확히 그리고 효율적으로 구하는 것이다. 이를 위해 확률론적인 탐색과정을 가지는 Simulated Annealing과 Genetic Algorithm에 의한 최적화과정을 살펴보고, 수학적함수와 트러스, 보 구조물에 대해 최적설계를 행하여 전체최적점에 도달한 신뢰도 및 계산시간을 기준으로 기존의 확정론적 최적화기법에 의한 결과와 그 유용성을 비교검토하였다.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2004년도 추계학술대회
• /
• pp.171-178
• /
• 2004

This study suggests a general paradigm enhancing genetic mutability. Mutability among heterogeneous members in a genetic population has been a major problem in application of genetic programming to diverse business problems. This suggested paradigm is implemented to developing new methods from existing methods. Within the evolutionary approach taken to designing new methods, a general representation scheme of the genetic programming framework, called a kernel, is introduced. The kernel is derived from the literature of algorithms and heuristics for combinatorial optimization problems. The commonality and differences among these methods have been identified and again combined by following the genetic inheritance merging them. The kernel was tested for selected methods in combinatorial optimization. It not only duplicates the methods in the literature, it also confirms that each of the possible solutions from the genetic mutation is in a valid form, a running program. This evolutionary method suggests diverse hybrid methods in the form of complete programs through evolutionary processes. It finally summarizes its findings from genetic simulation with insight.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.124-132
• /
• 2000

Distributed processing approach for structural optimization is presented in this study. It is implemented on network of personal computers. The validity and efficiency of this approach are demonstrated and verified by test model of truss. Repeated structural analysis algorithm, which spend a lot of overall structural optimization processes, are based on substructuring scheme with domain-wise parallelism and converted to be adapted to hardware and software environments. The design information data are modularized and assigned to each computer in order to minize the communication cost. The communications between nodes are limited to static condensation and constraint-related data collection.