• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.378-384
• /
• 2019

In the food wastewater treatment facilities, the water quality improvement effect and the greenhouse gas emission amount followed by the change in electricity usage through a change of the aeration tank ventilation system were evaluated. also, the amount of greenhouse gas emission followed by the change in electricity usage through the change of the sludge dewatering, storage, transporting method was also evaluated. The total GHG emission from food wastewater treatment facility improvement were divided into direct emissions from the treatment processes and indirect ones from electricity usage. The water quality improvement effect of wastewater treatment plant was found to be 63.3% for BOD removal rate, 42.0% for COD removal rate, 71.0% for SS removal rate and 39.6% for T-N removal rate. and according to the results of calculating output by applying both direct emissions of greenhouse gas (Scope 1) and the indirect emission (Scope 2) of greenhouse gas followed by changes in power consumption. It was estimated that there was a total of 276.0tCO2eq./yr(7.5%) greenhouse gas reduction effect from 3,668.8tCO2eq./yr before improvement to 3,392.8tCO2eq./yr after improvement. In this result is not due to the effects of water quality improvement of emission source, but because the reduction in electricity use has reduced the amount of greenhouse gas emissions.

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.432-445
• /
• 2018

Vegetation and water characteristics of an eco-technological water purifying biotope were investigated at five years after the wetland construction. A total of 91 vascular plant species in 36 families were recorded. Initially planted emergent macrophytes such as Phragmites australis, P. japonicus, Zizania latifolia, Typha latifolia, and T. angustifolia mainly comprised the vegetational components of the wetland. The effect of water purification was observed markedly in most indicators such as electric conductivity (P < 0.01), $NO_3-N$ (P < 0.05), $NH_4-N$ (P < 0.001), $K^+$ (P < 0.05), $Na^+$ (P < 0.01), and $Mg^{2+}$ (P < 0.01). In particular, $NO_3-N$ and $NH_4-N$ concentrations decreased to about 60% and 30%, respectively, via the purification process of the wetland. Separativeness and curvature from the meandering structure of 15 units (multi-cell wetland system) seemed likely to make the wetland continuously play a role as an eco-technological water purifying biotope. We recommend that eco-technological design factors should be included in wetland constructions for efficient and continuous functioning, thus enhancing ecological values of wetlands.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.6
• /
• pp.256-262
• /
• 2018

A great amount of fly ash, which is a waste from a thermal power plant, has not been appropriately recycled until now. Landfill of flay ash causes environmental pollution and enormous economic costs. In this study, manufacturing of architectural ceramic tile was investigated replacing fly ash with clay raw material. The properties of porcelain tile was analyzed after manufacturing porcelain tile with mineral based glaze and fast firing process. In particular, the effect of the fly ash addition on the properties of ceramic tile was investigated by increasing the amount of limestone addition. Porcelain tile with fly ash showed excellent bending strength, water absorption, warping and abrasion resistance. However, a significant decrease in durability was observed through the autoclave test. Addition of limestone increased the water absorption, twisting and hydration expansion of the ceramic tile, but it was confirmed that the durability of the ceramic tile with fly ash was greatly improved. In conclusion, recycled architectural ceramic tiles, which can meet domestic construction standards, could be manufactured with the addition of fly ash and limestone.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.30-38
• /
• 2019

Tracking, which is one of the main causes of electrical fires, is perceived as a physical phenomenon of electrical discharge. Hence tracking should be explained based on electric field analysis, conduction path by electron generation, and gas discharge physics. However, few papers have considered these details. This paper proposes a tracking mechanism including their effects on tracking progress. In order to prove this mechanism, a tracking experiment, an electric field analysis for the carbonization evolution model, and an explanation of the tracking process by gas discharge physics were conducted. From the tracking experiment, the current waveforms were measured at each stage of the tracking progress from corona discharge to tracking breakdown. The electric field analysis was carried out in order to determine the electric field on the surface of a dry-band and the high electric field region for electron generation during the generation and progress of carbonization. In this paper, the proposed tracking mechanism consisted of six stages including electron avalanche by corona discharge, accumulation of positive ions, expansion of electron avalanche, secondary electron emission avalanche, streamer, and tracking by conductive path. The pulse current waveforms measured in the tracking experiment can be explained by the proposed tracking mechanism. The results of this study will be used as the technical data to detect tracking phenomenon, which is the cause of electric fire, and to improve the proof tracking index.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.668-675
• /
• 2019

Fine dust in air pollutants is recognized as one of the most serious social environmental problems. Most of the NOx is generated in a combustion process such as that of a coal-fired power plant, and therefore efficient elimination of the NOx from the coal-fired power plants is needed. This study investigates the removal efficiency of using $TiO_2$, a photocatalyst, to remove NOx by Selective Catalytic Reduction (SCR). To evaluate the NOx removal efficiency, $TiO_2$ catalyst and phosphate binder were mixed on the surface of the $Al_2O_3$ substrate with the exothermic agent, and the substrate was heat-treated. The NOx removal efficiency of the catalysts was evaluated according to the temperature, and XRD, SEM, TG-DTA and BET analyzes were performed to investigate the physicochemical properties of the catalysts. NOx removal efficiency was 58.7%~65.9% at 20min, 63.7~66.0% at 30min with temperature change according to time($250^{\circ}C{\sim}500^{\circ}C$). The $TiO_2$ used in the SCR for NOx removal is judged to have the most efficient removal efficiency at $300^{\circ}C$.

• Tunnel and Underground Space
• /
• v.29 no.4
• /
• pp.215-229
• /
• 2019

This technical note describes the current status of Finnish radioactive waste disposal project which started to construct the repository for spent nuclear waste for the first time in the world. Finland started operating nuclear power plant in 1977 and is currently operating four nuclear power plants. After detailed site surveys started in 1993, Olkiluoto was finally selected by the parliament of Finland as the site for geological disposal in 2001 followed by a construction license in 2015. If the operating license is approved by the government in the 2020s, it would be the world's first case of geological disposal. In ONKALO, a site-specific underground research facility at the site of Olkiluoto, various studies were conducted to verify the safety of the repository. Finland uses the KBS-3 disposal concept, and Korea considers a similar disposal concept because of similar rock formations. The entire process in Finland including the operation status of intermediate and low-level waste disposal, site investigation and selection stages, and the latest rock mechanics and hydrogeological studies in ONKALO are presented. Suggestions for the radioactive waste disposal in Korea is given based on the Finnish case.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.3
• /
• pp.15-21
• /
• 2021

This study studied the value of the spatial organization of the temple and the form of the garden located in the Seojang area in the southwestern regions of China. The value of the Lama temple was looked into by examining the relationship between Lamaism and Lama temple through the spatial organiz ation, building arrangement, and garden of temples that served as the center of history, culture, and politics of the time in the process of converging Buddhism introduced through China's central districts and India with folk beliefs in Seojang through the poor environment. To this end, the value of the space and garden of the Lama temple was derived through the representative Lama temples, Potala Temple, Norbulingka Temple, and Dazhao Temple. First, due to the unique environment in which ice caps and green areas coexist, the representative Lama temples in Seojang, Potala Temple, Norbulingka Temple, and Dazhao Temple, are widely distributed in the form of leaning against valleys and mountain ranges based on folk beliefs and Buddhism's Jatabuli(自他不二) and mandala. the target sites are largely divided into upper and lower spaces. Second, the target sites are largely divided into upper and lower spaces. Buildings for worship are located in the upper space, and spaces for practice and garden are located in the lower space. The garden existed in two main forms. Third, the garden existed in two main forms. Located in the center of the practice space, the garden had an ideal structure to plant bo tree to escape from the two false obsession and go to a world of truth that is with the Buddha behind the world through practice like Sakyamuni, and there was a garden around the temple where meditation and exchange took place. Evergreen coniferous forests are mainly planted in the forests.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.445-457
• /
• 2021

In previous studies, it was confirmed that through the in-situ production of precast concrete members, costs could be reduced by 14.5-39.4% compared to in-plant production. In particular, it was confirmed that the factory owner did not make a contract if it did not earn more than 20% of the production cost. If precast concrete members are produced in-situ under the same conditions, the quality equivalent to that of factory production can be secured. As it is advantageous in terms of cost and quality, precast concrete members must be produced in-situ. However, it is difficult to produce all quantities in-situ due to time and various other constraints. This is because in-situ production is avoided due to anticipated risks during the project management process. However, if the risk factors are analyzed before performing in-situ production of precast concrete members, it will increase the opportunity for in-situ production. Therefore, this study develops a checklist for evaluating the risk of in-situ production of precast concrete members. By applying the checklist to one case site, it was verified that risk factors can be evaluated easily and quickly. As a result, it was analyzed that sites with a high building coverage ratio are classified as high-risk sites because it is difficult to secure usable area for production and storage. The developed checklist efficiently evaluates the risk factors of in-site production, and makes it possible for the operator to determine the risk factors, which can change frequently during project execution, and respond according to the situation.

• Korean Journal of Environment and Ecology
• /
• v.35 no.3
• /
• pp.237-255
• /
• 2021

Lychnis wilfordii (Regel) Maxim. is one of the wetland specialists mainly distributed in peatlands at high latitudes. In Korea, it is isolated in two regions. This study investigated habitats, growth traits, and self-compatibility of L. wilfordii and assessed the internal dynamics of its population persistence. Its population has remained stable in the Yongneup Wetland Protected Area (YWPA). There was a clear difference in vegetation environment between YWPA and the distribution area in Daegwallyeong (DWL), Pyeongchang-gun. It has self-compatibility while pollinators facilitate its seed production. It produces a large number of hibernacles and bears the maximum number of branches and fruits in soil with rich organic contents. However, it grows and bears fruits even under the condition of low organic contents. In YWPA, L. wilfordii is not distributed in high moor but widely distributed in low moor where tussocks by Carex thunbergii var. appendiculata are developed. It is mainly distributed on the top of tussocks also. Therefore, it is judged that the formation, growth, and extinction of tussocks by C. thunbergii var. appendiculata is closely related to the establishment, growth, and extinction of plants distributed in this space. It is assessed that the current YWPA has well-developed tussocks in which L. wilfordii is widely distributed, and extinction and re-establishment progress well. Accordingly, the L. wilfordii population is expected to be sustainable in the long term given if its current ecological process is maintained well.

• Korean Journal of Environment and Ecology
• /
• v.35 no.4
• /
• pp.387-397
• /
• 2021

This study aims to present reference data necessary for developing evaluation indicators to analyze the actual resilience of purchased land by investigating the factors that affect the restoration of the purchased land in the riparian zone and quantitatively calculating its importance. The main results are as follows. Firstly, this study identified 34 potential resilience factors through a literature review encompassing domestic and overseas studies and derived seven ecological responsiveness factors, six physical responsiveness factors, and four managerial responsiveness factors through the Delphi survey. Secondly, reliability analysis and Analytic Hierarchy Process (AHP) analysis derived the following important factors: structural stability of the vegetation restored in the purchased land, species diversity of wildlife, structural stability of wildlife, the size of restored wetland after purchase, number of plant species, and the land cover status adjacent to the purchased land. The study results are expected to be helpful information for ecological restoration and management plans reflecting reinforcing factors for resilience at each stage of land purchase, restoration, and management.