• Research in Community and Public Health Nursing
• /
• v.15 no.3
• /
• pp.471-482
• /
• 2004

Purpose: This study intended to identify personality factors and related problematic behaviors of adolescents who drink alcohol in order to provide basic data for developing nursing programs. Methods: The data were collected from October to December 2002 from 1.080 high school students in Seoul. The Revised Cloninger's Tri-dimensional Personality Questionnaire (TPQ) was used to measure their personalities. The alcohol expectancy was measured using the tool revised by Cho (1999) and stress levels were measure using a stress tool revised Cho (1998). The data were analyzed with SPSS Windows using Chi square test. independent t-test. and logistic regression analysis. Results: 1. The percentage of fathers who drank was 79.8%. mothers. 54.3%. and friends. 54.3%. The alcohol expectancy averaged 6.36 while the stress levels were 132.79. 2. It was found that there are significant differences (p<.001) in problematic drinking behaviors according to the following variables: second year high school students among all grade variables, more monthly pocket money for the amount of money variables, the group of students who smoked in the case of the variable related to smoking, spending more time using the Internet for the Internet use variable, and having friends who drink 65.6% for the friend variable. The alcohol expectancy scale of those students who showed problematic drinking behaviors was higher than that of those who did not. There are four family-related stress subscales, and there was a significant difference among them (p<.05). Among the personal characteristics, the group who displayed problematic drinking behaviors seeks new experiences and reward dependence more than the group who did not exhibit those behaviors, and there were significant differences between the two groups (p<.001). 3. When the socio-demographic and drinking-related factors were controlled, the tendency of seeking new experiences increased the risk of problematic behaviors 1.07 times (p<.05). Compared to the non smoking group, the smoking group was found to have a 5.06 time (p<.001) greater risk of displaying problematic drinking behaviors. In comparison with the non drinking group, the drinking group was also found to have a 5.31 time (p<.001) greater risk of exhibiting problematic drinking behaviors. The group with high alcohol expectancy scores was significantly different from the group with the no alcohol expectancy, showing a 1.26 time (p<.00l) greater risk of problematic drinking behaviors. Conclusions: Based on these results, the problematic drinking behaviors were connected with alcohol expectancies, friends and personality types. Therefore, we should develop an alcoholic prevention program for adolescence considering the above results.

• Journal of Korean Public Health Nursing
• /
• v.11 no.1
• /
• pp.82-92
• /
• 1997

Cerebrovascular diseases in Korea is an important health problem since mortality and mobidity have been increased rapidly. It marked the 2nd cause of specific death rates in 1993. The subjects of the study were seventeen citizens who are using to the Oriental Medicine. The data were collected from Apr. to Oct. 1996. The researcher as a caregiver and volunteer made confidence of them and asked for their agreement on the purpose of the study. The subjects expressed their experience as openheartedly as possible. The researcher described closely the experiences of using to the Oriental Medicine with there words themselves and under the observation of the reseacher. A tape-recorder was used under the permission of the subjects to prevent the leakage of the spoken information and communication. The analysis of the data was made through the phenomenological analytic method suggested by Van Kaam, which is as follows; as an unit of description which include the subject' expressions and the researcher's observation. The conclusions of this study was as follows : one hundred eighteen descriptive expression found and they were grouped eighteen common factors. These are ${\ulcorner$to effect needle${\lrcorner}$ ${\ulcorner$to effect Chinese medicine${\lrcorner}$ ${\ulcorner$treatment method${\lrcorner}$ ${\ulcorner$attitude of herb doctor${\lrcorner}$ ${\ulcorner$recommendation of family and other person${\lrcorner}$ ${\ulcorner$what one sold to${\lrcorner}$ ${\ulcorner$traditional custom${\lrcorner}$ ${\ulcorner$experience of the past use${\lrcorner}$ ${\ulcorner$to be desolate${\lrcorner}$ ${\ulcorner$negative recognition${\lrcorner}$ ${\ulcorner$Ineffective drug${\lrcorner}$ ${\ulcorner$Unfaithful of doctor${\lrcorner}$ ${\ulcorner$positive recognition${\lrcorner}$ ${\ulcorner$Oriental medical hospital surroundings${\lrcorner}$ ${\ulcorner$to build up one's health${\lrcorner}$ ${\ulcorner$to be clear blood${\lrcorner}$ ${\ulcorner$economic burden${\lrcorner}$ ${\ulcorner$deficit of profession${\lrcorner}$ Finally. eighteen common factors were grouped under six highter categories. These are ${\ulcorner$Belief to oriental medicine${\lrcorner}$ ${\ulcorner$motivation of use${\lrcorner}$ ${\ulcorner$distrust to western medicine${\lrcorner}$ ${\ulcorner$stability of emotion${\lrcorner}$ ${\ulcorner$Alteration of positive physical function${\lrcorner}$.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.151-160
• /
• 2018

Waxes currently used as a coating material to preserve surfaces of outdoor iron sculptures tend to face lower coating strength and efflorescence due to the aging from air pollution and acid rains. Consequently, they are subjected to repeated corrosions shortly after the treatment. And the sculptures face the problem losing their original nature because of the changes of colors and lusters, so this convergence study aims at developing wax with better performance than the existing materials. For this reason, the study identified the effects of physical property using the environmental experiments such as the tests of salt spray and gas corrosion as well as the analysis of luster level and thermo-gravimetry. As this study result, the developed ISC wax showed the excellent blocking effect from salt water and coating durability more than five times compared with the existing waxes, better acid resistance by two-four times, sun block effect by 2-10 times, improved luster variance by 3-16 times, improved thermo-stability and durability by 0.5-5 times, and therefore demonstrating far better coating effect than the existing waxes. In the light of these findings, this study contributes for this new development which can replace the existing waxes used so far in order to preserve the outdoor iron sculptures.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.1
• /
• pp.5-11
• /
• 2010

The objective of this study is to evaluate the effect of operational parameters such as rotation speed and vibrating milling time for the fabrication of photocatalytic $TiO_2$ thin film using aerosol deposition methods. $TiO_2$ powders produced in the range of 1,000-3,000 rpm of rotation speed of centrifugal separator are ineffective on the fabrication of $TiO_2$ thin film by aerosol deposition due to the problem of nozzle powder jam. $TiO_2$ powders controlled by vibrating milling had about 420 nm of average diameter after 2 hr of vibrating milling time. The result of XRD analysis indicated that $TiO_2$ powders had a anatase phase. Vibrating milling methods was considered to be an effective pre-treatment process for $TiO_2$ powder control. Consequently $TiO_2$ photocatalytic thin film with dispersion of anatase crystallites controled by vibrating milling was successfully fabricated by aerosol deposition. The permeation flux of $TiO_2$ photocatalytic thin film with the immobilized $TiO_2$ powder was higher than that of suspended $TiO_2$ powder. Therefore, $TiO_2$ photocatalytic thin film promises to be one of the effective methods for enhancing filtration performance for the treatment of organic pollutants.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.263-272
• /
• 1999

Slice method is commonly used in solving slope stability problems since it is easy to use and its computation time is rather short. But depending upon the assumptions on the inter-slice forces, different methods are available. Quite often the difference between methods are so big that it is very difficult to make engineering decisions. This paper describes a method to calculate the factor of safety of a slope using FLAC, a finite difference based program. A FISH routine is developed to calculate the factor of safety, and verified by comparing with Chen's limit equilibrium solution. An example problem was selected from Fredlund and Krhan's paper, and results were compared for different soil and water conditions. The difference was less than 0.01 when the soil is homogeneous, and less than 5 % when a weak layer is embedded. Since most geotechnical application programs are capable of considering complicated ground conditions as well as the effect of ground supports, numerical methods are believed to be very useful in making engineering decisions. The developed routine can be applied to the calculation of the factor of safety of jointed rock slopes or weathered rock slopes where the use of slice method is limited.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.123-129
• /
• 2018

The aim of the research is providing a fundamental idea of reducing viscosity of cement based materials by replacing powder based material. With developing concrete technology, high performance concrete with high solid volume fraction has been used widely. Under the conditions of the high solid volume fraction due to the low w/c and replacement of SCMs, decreased fluidity is one of the critical problem, and thus plasticizer has been used to improve fluidity of the mixture. However, in rheological aspect, the fluidity of cement based materials can be defined with yield stress and viscosity, and using plasticizer only decreases yield stress without least controlling on viscosity. Therefore, based on the idea of Krieger-Dougherty model, a feasibility of wasted limestone powder from cement manufacturing process was used to decrease the viscosity of the mixture by replacing cement powder. According to a series of experiment, by replacing wasted limestone powder solely, there was a possibility of reducing viscosity was observed. Thus, in this research scope, it is considered to contribute on providing a fundamental idea of reducing viscosity with powder replacement and it is expected to contribute on further research using various conditions of replacing powders for reducing viscosity of cementitious materials.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.263-273
• /
• 2007

Statement of problem: Alteration of tooth function is assumed to be changed by stress/strain on the adjacent alveolar bone, producing changes in morphology similar to those described for other load-bearing bones. When teeth are removed, opposing teeth will not be functioned. When edentulous area is restored by implant prostheses, opposing teeth will be received physiologic mechanical stimuli. Purpose: The aim of this study was to evaluate the bone changes around the teeth opposing implant restoration installed mandibular posterior area. Material and method: Eight patients who had mandibular posterior edentulous area were treated with implants. Radiographs of the opposing teeth were taken at implant prostheses delivery(baseline), 3 months, and 6 months later. Customized film holding device was fabricated to standardize the projection geometry for serial radiographs of opposing teeth. Direct digital image was obtained. Gray values of region of interest at each digital image were measured and compared according to time lapse. Repeated measured analysis of variance and post-hoc Scheffe's test were performed at the 95% significance level. Results: Alveolar bone changes around the natural teeth opposing the posterior implant in mandible showed statistically significant difference compared to control group(P<0.05). And gray values of alveolar bone around the teeth opposing implants were increased. There were no statistically significant differences of alveolar bone changes between crestal group and middle group and between mesial group and distal group according to time lapse(P>0.05). There were no statistically significant differences of alveolar bone changes among mesial-crestal group, mesial-middle group, distal-crestal group, distal-middle group, and control group(P>0.05). Conclusion: Alveolar bone around the natural teeth opposing the implant prosthesis showed gradual bony apposition.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.3
• /
• pp.306-313
• /
• 2012

Class III malocclusion or anterior crossbite is commonly seen in Asian. This problem is easily recognized by dentists and parents. During the primary dentition period, anterior crossbite with functional shift and deep overbite could develop to skeletal protrusive mandible. So, early and proper diagnosis of anterior crossbite which needs prompt treatment is important. These cases showed the early management of crossbite with functional shift in primary dentition using intraoral removable appliance resulting in improvement of intermaxillary relationship. And I analyzed the positional change and the dimensional change during treatment with lateral cephalometric x-ray analysis. Our patients showed vertical dimensional change of lower anterior facial height and clockwise rotation which results crossbite correction in 1 year of treatment period.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.4
• /
• pp.349-365
• /
• 2006

State of problem : A number of investigation about increase of surface area via various surface treatments and modification of surface constituent have been carried out. Purpose : The surface characteristics and stability of implants treated with anodic oxidation, fluoride ion incorporation, and groups treated with both methods were evaluated. Material and method : Specimens were divided into six groups, group 1 was the control group with machined surface implants, groups 2 and 3 were anodic oxidized implants (group 2 was treated with 1M $H_2SO_4$ and 185V, group 3 was treated with 0.25M $H_2SO_4$ and $H_3PO_4$ and 300V). Groups 4, 5 and 6 were treated with fluoride. Group 4 was machined implants treated with 0.1% HF, and groups 5 and 6 were groups 2 and 3 treated with 10% NaF respectively. Using variable methods, implant surface characteristics were observed, and the implant stability was evaluated on rabbit tibia at 0, 4, 8 and 12 weeks. Result : 1. In comparison of the surface characteristics of anodic oxidized groups, group 2 displayed delicate and uniform oxidation layer with small pore size containing Ti, C, O and showed mainly rutile, but group 3 displayed large pore size and irregular oxidation layer with many crators. 2. In comparison of the surface characteristics of fluoride treated groups 4, 5, 6 and non-fluoride treated groups 1, 2, 3, the configurations were similar but the fluoride treated groups displayed rougher surfaces and composition analysis revealed fluoride in groups 4, 5, 6. 3. The fluoride incorporated anodic oxidized groups showed the highest resonance frequency values and removal torque values, and the values decreased in the order of anodic oxidized groups, fluoride treated group, control group. 4. According to implant stability tests, group 2 and 3 showed significantly higher values than the control group (P<.05). The fluoride treated groups showed relatively higher values than the non fluoride treated groups and there were significant difference between group 4 and group 1 (P<.05). Conclusion : From the results above, it can be considered that the anodic oxidation method is an effective method to increase initial bone stability and osseointegration and fluoride containing implant surfaces enhance new bone formation. Implants containing both of these methods should increase osseointegration, and reduce the healing period.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.1
• /
• pp.12-20
• /
• 2020

Purpose: This study was designed to analyze the relationship between the presence and severity of depression and chewing problems (CPs) in a representative sample of the general population. Materials and Methods: Health surveys and examinations were conducted on a nationally representative sample (n = 8150) of Korean was conducted. CPs was determined by a simple survey response concerning "Do you feel uncomfortable about chewing your food because of problems with your mouth such as teeth, dentures and gums?" Depression was defined as individuals with a total score ≥ 10 on the Patient Health Questionnaire (PHQ)-9 survey. Data regarding demographics, socioeconomic history and comorbid health conditions were used to analyze adjusted logistic regression models. Results: In the Korean population, the prevalence of depression was significantly greater in individuals with CP (17.2%) than in those without CP (10.2%). On multivariate logistic regression analysis, the presence of depression was significantly associated with CPs (adjusted odd ratio [aOR]: 1.90, P < 0.001). The risk of CPs increased with increasing severity of depression as follows: severe depression (OR: 2.62, P < 0.001), moderately severe depression (OR: 2.19, P < 0.001). Conclusion: The presence of depression was significantly associated with CPs, especially in severely depressed individuals. Depression screening should be considered in treating CP patients.