• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.223-228
• /
• 2007

본 논문에서는 E형 적층패치를 이용하여 4세대 이동통신(IMT-Advanced) AccessPoint용 광대역 안테나의 설계 및 제작에 관한 연구를 하였다. E형 패치는 전류의 이동경로를 길게하여 소형화 및 광대역화 할 수 있었으며, 동축 프로브의 인덕터 성분이 슬롯에 의한 캐패시터 성분을 보상하여 더욱 광대역하된 안테나를 제작할 수 있었다. E형 단일패치 안테나는 13%(510[MHz])의 임피던스 대역폭을 얻었으며, 첫 번째 패치의 위에 두 번째 패치를 적충함으로써 56%(2060[MHz])의 임피던스 대역폭을 얻을 수 있었다. 최종 제작된 안테나는 3.23 ${\sim}$ 5.29[GHz] 대역에서 -10dB 이하의 양호한 반사손실과 9.6dBi 이상의 높은 이득을 얻을 수 있었다.

• 한국항공우주학회지
• /
• 제31권5호
• /
• pp.87-92
• /
• 2003

일반적으로 연소과정에서 발생한 고온고압의 연소가스로 인하여 액체추진기관의 연소실 및 노즐 벽면 그리고 추진기관 후방부위에 대류열전달과 복사열전달이 발생하는 것으로 알려져 있으며, 액체추진기관에서 발생하는 복사열전달 현상은 재생냉각장치의 열입력랑 예측 및 발사체의 추진기관 후방부위에 탑재되는 전자장비 및 구조물의 열적 환경을 분석하는데 매우 중요하다. 이에 본 연구에서는 노즐 후방부위에서 발생하는 복사열전달량을 측정하고 연소압과 혼합비에 따른 영향을 파악하였다. 동알한 형상의 소형 액체추진기관에서 연소압(200, 300, 400 psi)과 혼합비(1.5, 2.0, 2.5)에 따른 복사열전달의 특성을 파악하기 위하여 각각 3가지 조건에 대하여 연소시험을 수행하여 복사열전달량을 측정하였다. 시험 결과로부터 연소가스에서 발생하는 복사열전달의 상대적인 크기 및 미치는 인자들을 파악할 수 있었다. 본 연구를 통하여 석영을 활용하여 복사하는 복사열전달의 크기 및 현상을 파악할 수 있었다. 또한, 연소실 및 노즐에서 발생하는 복사열전달 현상을 파악할 수 있었다

• 대한의용생체공학회:의공학회지
• /
• 제30권6호
• /
• pp.503-509
• /
• 2009

The development of technology has led to ubiquitous health care service, which enables many patients to receive medical services anytime and anywhere. For the ubiquitous health care environment, real-time measurement of biomedical signals is very important, and the medical instruments must be small and portable or wearable. So, such devices have been developed to measure biomedical signals. In this study, we develop the biomedical monitoring device which is sensing the PPG signal, one of the useful signal in the field of ubiquitous healthcare. We design a watch-like biomedical signal monitoring system without a finger probe to prevent the user's inconvenience. This system obtains the PPG from the radial artery using a sensor in the wrist band. But, new device developed in this paper is easy to get the motion artifacts. So, we proposed new algorithm removing the motion artifacts from the PPG signal. The method detects motion artifacts by changing the degree of brightness of the light source. If the brightness of the light source is reduced, the PPG pulses will disappear. When the PPG pulses have disappeared completely, the remaining signal is not the signal that results from the changing blood flow. We believe that this signal is the motion artifact and call it the noise reference signal. The motion artifacts are removed by subtracting the noise reference signal from the input signal. We apply this algorithm to the system, so we can stabilize the biomedical monitoring system we designed.

• Archives of Plastic Surgery
• /
• 제47권4호
• /
• pp.365-370
• /
• 2020

The ability to directly harvest thin and superthin perforator flaps without jeopardizing their vascularity depends on knowledge of the microsurgical vascular anatomy of each perforator within the subcutaneous tissue up to the dermis. In this paper, we report our experience with ultrahigh-frequency ultrasound (UHF-US) in the preoperative planning of thin and superthin flaps. Between May 2017 and September 2018, perforators of seven patients were preoperatively evaluated by both ultrasound (using an 18-MHz linear probe) and UHF-US (using 48- and 70-MHz linear probes). Thin flaps (two cases) and superthin flaps (five cases) were elevated for the reconstruction of head and neck oncologic defects and lower limb traumatic defects. The mean flap size was 6.5×15 cm (range, 5×8 to 7.5×23 cm). No complications occurred, and all flaps survived completely. In all cases, we found 100% agreement between the preoperative UHF-US results and the intraoperative findings. The final reconstructive outcomes were considered satisfactory by both the surgeon and the patients. In conclusion, UHF-US was found to be very useful in the preoperative planning of thin and superthin free flaps, as it allows precise anticipation of very superficial microvascular anatomy. UHF-US may represent the next frontier in thin, superthin, and pure skin perforator flap design.

• 한국농공학회지
• /
• 제35권1호
• /
• pp.67-75
• /
• 1993

This study is to analyze both root growth and soil moisture extraction pattern during the growing period of upland crops with respect to soybean, redpepper, sesame. Field and lysimeter tests were conducted under 12 treatments of soil moisture level by the San Cristobal experimental design(1981) and 3 soil type(sand, sandy loam, silty loam) for 4 years('87-'90) at the experimental plot of Rural Development Administration located in Suwon. The results of this study are summarized as follows : 1.For soybean, redpepper and sesame, root growth in dry soil was better than that in wet soil and it could be expressed as a sin function in terms of time. Maximum root depth was about 55cm, 44cm, 40cm respectively. 2.The average soil moisture extraction pattern for soybean, redpepper and sesame were 61.4%, 62.8%, 79.5% for zone l(0-l5cm). 25.5%, 27.1%, 18.3%, for zone 2(15-30cm).11.4%, 9.8%, 2.3% for zone 3(30-45cm), 1.7%, 0.3%, 0.04% for zone 4(45-60cm) respectively. This means that Zone 1 would be the dominant zone in irrigation scheduling. 3.With respect to soybean, the soil moisture extraction pattern(SMEP) was varied somewhat according to the erent maintenance of soil moisture level. The average SMEP for high maintenance of soil moisture was 46%, 29%, 17%, 8%, for middle maintenance of soil moisture was 43%, 29%, 17%, 11 % and for low maintenance of soil moisture was 40%, 28%, 20%, 12%, respectively. 4.With respect to soybean, the soil moisture in the upper layer was distinctly consumed more than that in the lower layer for clay loam soil and the soil moisture of all layers was consumed evenly for sand soil. The SMEP for sandy loam soil showed a middle result compared with the above 2 soil types.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.436-436
• /
• 2011

Recently, spintronic devices with submicron structures are widely investigated to take advantage of their unique micromagnetic properties. In this work, we study the temperature dependence of exchange bias in bilayer anti-dot arrays made by depositing Co (40 nm)/Ni (5 nm) ferromagnetic bilayer on Si substrate to form anti-dot arrays with a diameter $1{\mu}m$. The anti-dot patterning was done only for the upper Co layer, while the Ni underlayer was kept unperforated. The temperature dependences of magnetoresistance (MR) and exchange bias were studied along magnetic easy and hard axes. The in-plane MR measurements were performed using a physical-property measurement system (PPMS ; Quantum Design Inc.) at various temperatures. The standard in-line four-point probe configuration was used for the electrical contacts. As temperature was varied, the MR data were obtained in which in-plane field (H=3 kOe) was applied in the directions along the hard and the easy axes with respect to the lattice plane. The temperature dependences of magnetic anisotropy and exchange bias were also studied along the magnetic easy and hard axes. As temperature decreases, the single peak splits into two peaks. While no exchange bias was observed along the magnetic easy axis, the exchange bias field steadily increased with decreasing temperature along the magnetic hard axis. These results were interpreted in connection with the magnetic anisotropy and the effect of the anti-dots in pinning domain wall motion along the respective direction.

• 한국전자파학회논문지
• /
• 제18권3호
• /
• pp.257-264
• /
• 2007

본 논문은 IEEE 802.11a의 표준 규격$(5.15\sim5.25\;GHz,\;5.25\sim5.35\;GHz,\;5.725\sim5.825\;GHz)$을 하나로 통합할 수 있는 광대역, 고이득 안테나를 설계 및 제작하였다. 광대역 구현을 위해 사각 패치에 평행한 이중 슬롯을 삽입하였으며, 동축 프로브 급전 방식을 적용하여 슬롯에 의한 정전 성분을 상쇄시키고, $\lambda_g/4$ 임피던스 변환기를 Taper형 선로로 구성하여 광대역 임피던스 정합이 용이하게 하였다. 안테나의 이득을 개선하기 위하여 $2\times2$ 배열 구조로 최종 설계하였으며, 최종 제작한 안테나는 $5.01\sim5.95\;GHz(B/W\doteqdot940\;MHz)$ 대역에서 return loss -10 dB 이하의 양호한 반사 손실과 13 dBi 이상의 높은 이득을 얻을 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술회의 초록집
• /
• pp.11-11
• /
• 2010

In order to design for nano structured materials with enhanced thermoelectric properties, the alloys in the pseudo-binary $Bi_2Te_3$-PbTe system were investigated for their micro structure and thermal properties. For this synthesis the liquid alloys were cooled by water quenching method. The micro structure images were taken by using electron probe micro analyzer (EPMA). Dendritic and lamellar structures were clearly observed with the variation in the composition ratio between $Bi_2Te_3$ and PbTe. It was confirmed that a metastable compounds is $PbBi_2Te_4$ in the The $Bi_2Te_3$-PbTe system. The change in the composition increasing $Bi_2Te_3$ ratio causes to change structure from dendritic to lamellar. Seebeck coefficient of alloys 5 which the mixture rate of $Bi_2Te_3$ is 83% was measured as the highest value. In contrast, the others decreased by increasing $Bi_2Te_3$. n-type characteristics was observed at all condition except alloy 6 which $Bi_2Te_3$ ration is 91%. The power factors of all samples were calculated with Seebeck coefficient and resistivity. Also the thermal conductivity was measured by using laser flash analyzer (LFA). In this work, the microstructures and thermal properties have been measured as a function of ratio of $Bi_2Te_3$ in the $Bi_2Te_3$-PbTe system.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.847-858
• /
• 2013

Since 2001, a series of five irradiation test campaigns for atomized U-Mo dispersion fuel rods, KOMO-1, -2, -3, -4, and -5, has been conducted at HANARO (Korea) in order to develop high performance low enriched uranium dispersion fuel for research reactors. The KOMO irradiation tests provided valuable information on the irradiation behavior of U-Mo fuel that results from the distinct fuel design and irradiation conditions of the rod fuel for HANARO. Full size U-Mo dispersion fuel rods of 4-5 $g-U/cm^3$ were irradiated at a maximum linear power of approximately 105 kW/m up to 85% of the initial U-235 depletion burnup without breakaway swelling or fuel cladding failure. Electron probe microanalyses of the irradiated samples showed localized distribution of the silicon that was added in the matrix during fuel fabrication and confirmed its beneficial effect on interaction layer growth during irradiation. The modifications of U-Mo fuel particles by the addition of a ternary alloying element (Ti or Zr), additional protective coatings (silicide or nitride), and the use of larger fuel particles resulted in significantly reduced interaction layers between fuel particles and Al.

• 융합신호처리학회논문지
• /
• 제16권4호
• /
• pp.156-161
• /
• 2015

본 논문에서는 GPS(Global positioning System)-Bluetooth-DSRC(Dedicated short range communication) 대역의 신호를 동시에 수신할 수 있는 차량용 이중편파 다중대역 안테나를 적층형으로 설계하였다. 안테나는 다층 구조(Multi-Layer)이고, 유전율이 4.4이고, 두께가 1.6mm 인 FR4-epoxy 기판을 사용하였다. GPS와 DSRC 대역은 원형편파(Circular Polarization) 특성을 가지고, 블루투스 대역은 선형편파(Linear Polarization) 특성을 가지며, 이들 안테나는 단일 프루브 급전하였다. 안테나는 Ansys HFSS v11로 시뮬레이션 하였고, 측정결과와 비교하면서 크기가 $67mm{\times}67mm{\times}4.8mm$인 안테나를 설계하였다. 최적 설계된 안테나는 -10dB 대역폭이 각 대역에서 82MHz, 127MHz, 862MHz로 측정되었고, GPS 및 DSRC 대역의 3dB 축비 대역폭은 12MHz와 112MHz로 시뮬레이션 되었다. 이 결과는 시스템이 요구하는 사양을 만족하고 있음을 확인하였다.