• Journal of information and communication convergence engineering
• /
• 제21권4호
• /
• pp.261-267
• /
• 2023

Public research, which requires large computational resources, utilizes the supercomputers of the National Supercomputing Center in the Republic of Korea. The average utilization rate of resources over the past three years reached 80%. Therefore, to ensure the operational stability of this national infrastructure, specialized centers have been established to distribute the computational demand concentrated in the national centers. It is necessary to predict the computational demand accurately to build an appropriate resource scale. Therefore, it is important to estimate the inflow and outflow of computational demand between the national and specialized centers to size the resources required to construct specialized centers. We conducted a logit model analysis using the probabilistic utility theory to derive the preferences of individual users for future supercomputer resources. This analysis shows that the computational demand share of specialized centers is 59.5%, which exceeds the resource utilization plan of existing specialized centers.

• 한국지진공학회논문집
• /
• 제12권3호
• /
• pp.1-10
• /
• 2008

내진설계기준이 반영되지 않은 기존 구조물의 경우 내진보강에 의하여 구조물의 내진성능을 향상시킬 수 있다. 내진보강의 수준을 합리적으로 결정하기 위해서는 구조물의 사용기간 동안에 예상되는 지진피해 관련 손실이 최소화되도록 하여야 하는데, 이를 위해서는 구조물이 위치한 지역에 대한 지진의 강도별 발생빈도, 지진에 의한 구조물의 기능상실 및 직접/간접 피해를 복합적으로 고려하여 구조물의 예상 손실비용을 산정하여야 하며 이는 구조물 손상에 대한 지진위험도 해석을 통해서 그 해석을 수행할 수 있다. 본 연구에서는 확률적 지진요구모델을 이용한 위험도 평가를 통하여 구조물의 지진에 대한 피해 손실을 정량적으로 산정하고 이를 바탕으로 초기비용과 예상손실비용을 포함한 총 손실비용을 최소화시킬 수 있도록 내진보강 수준을 최적화하는 절차를 제시하였다. 구조물과 관련된 지진피해 산정에 있어서 지진하중의 강도별 발생확률 및 구조물의 손상확률을 동시에 고려하여 구조물 생애주기에 대한 구조물의 지진손상 확률밀도함수 및 누적분포함수를 수식화하였으며 수식의 유효성을 유지하기 위한 확률변수의 유효범위를 정의하였다. 또한 여기에 사회적, 경제적 손실을 정량화하기 위한 손실함수를 결부시켜 구조물과 관련된 지진 피해 손실의 기댓값을 정량적으로 산정할 수 있도록 하였다. 제시된 해석기법은 기존의 시뮬레이션에 의한 손실산정법과 비교하여 해석의 정확도는 잃지 않으면서 구조해석의 반복횟수를 대폭 줄일 수 있다는 장점이 있으며 빌딩과 교량을 비롯한 구조물의 내진성능 평가 및 개선을 위한 의사결정 시에 효율적으로 적용될 수 있을 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.8-14
• /
• 2017

전기 장비와 같은 비구조적 요소는 다양한 제반 시설에서 적절한 기능을 수행하는 중요한 역할을 한다. 특정 시설에서 이러한 비구조적 요소 중 일부는 강한 지진 발생이 발생한다고 하더라고 계속적으로 작동해야 한다. 그러나 다양한 이유 중 지진 진동의 불확실성과 전기 장비와 같은 비구조적 요소의 다양성 때문에 지진 진동의 영향으로 인한 각 기계적 손상과 작동 상의 손상을 정의하는 것과 시스템 손상 확률을 결정하는 것은 어려운 일이다. 따라서 비구조적 요소의 특성과 지진의 변화를 고려한 전기 장비의 성능 평가를 위한, 실용이고 효과적인 확률 모델을 개발할 필요가 있다. 이 연구는 비구조적 요소의 동적 거동과 비구조적 요소를 구조물에 구속 시키는 구속 장치의 선형 거동 및 비선형 거동에 대한 이해를 향상 시킬 것이다. 또한, 이 연구는 폭넓고 새로운 지진 강도를 위한 구속된 비구조적 요소의 확률론적 내진 응답 모델을 생성할 것이다.

• Earthquakes and Structures
• /
• 제26권2호
• /
• pp.117-130
• /
• 2024

Probabilistic model of seismic demand is the main tool used for seismic demand estimation, which is a fundamental component of the new performance-based design method. This model seeks to mathematically relate the seismic demand parameter and the ground motion intensity measure. This study is intended to use Bayesian analysis to evaluate the accuracy of the seismic demand estimation of Steel moment resisting frames (SMRFs) through a completely Bayesian method in statistical calculations. In this study, two types of intensity measures (earthquake intensity-related indices such as magnitude and distance and intensity indices related to ground motion and spectral response including peak ground acceleration (PGA) and spectral acceleration (SA)) have been used to form the models. In addition, an extensive database consisting of sixty accelerograms was used for time-series analysis, and the target structures included five SMRFs of three, six, nine, twelve and fifteen stories. The results of this study showed that for low-rise frames, first mode spectral acceleration index is sufficient to accurately estimate demand. However, for high-rise frames, two parameters should be used to increase the accuracy. In addition, adding the product of the square of earthquake magnitude multiplied by distance to the model can significantly increase the accuracy of seismic demand estimation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.191-192
• /
• 2017

In response to the economic depression, the demand for fixed rent income has increased according to the easing construction regulations. it caused indiscriminated investment to stakeholders. This leads to oversupply in the multi-family Housing market and increases unsold housing and vacancy rates except specific area such as Gangnam-gu.In order to solve this issue, although studies on the optimization price of apartment houses has been conducted, the study is insufficient regarding on residential officetel. Therefore, the objective is to suggest a basic study on optimal price estimation model development by using probabilistic forecasting method in planning phase. To achieve the objective, first, variables are defined such as expenses, financial costs, income, etc. Second, causal loop diagram is suggested. Third, basic optimization prices estimation model is developed. In the future, this study can be used as one of decision making tools in planning phase of officetel development projects.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.65-70
• /
• 2008

The capacity spectrum method (CSM) is a deterministic seismic analysis approach wherein the expected seismic response of a structure is established as the intersection of the demand and capacity curves. Recently, there are a few studies about a probabilistic CSM where uncertainties in design factors such as material properties, loads, and ground motion are being considered. However, researches show that soil-structure interaction also affects the seismic responses of structures. Thus, their uncertainties should also be taken into account. Therefore, this paper presents a probabilistic approach of using the CSM for seismic analysis considering uncertainties in soil properties. For application, a reinforced concrete bridge column structure is employed as a test model. Considering the randomness of the various design parameters, the structure's probability of failure is obtained. Monte Carlo importance sampling is used as the tool to assess the structure's reliability when subjected to earthquakes. In this study, probabilistic CSM with and without consideration of soil uncertainties are compared and analyzed. Results show that the analysis considering soil structure interaction yields to a greater probability of failure, and thus can lead to a more conservative structural design.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.782-787
• /
• 2005

Magnitude of generated harmonic currents along with the operation of AC traction has nonlinear characteristics, and generated harmonic currents for high speed traction are more and more in high speed railroad(HSR) systems, especially. This paper presents probabilistic approximation method for the harmonic currents analysis about the operating speed of AC traction. To use probabilistic method for HSR system, probability density function(PDF) for collected operating speed based measure data is calculated. Mean and variance of harmonic currents of single traction are obtained based on the operating speed PDF and electrical traction model. The results of Monte Carlo Simulation(MCS) are in well accordance with the experimental and analytic methods. The harmonics of different number of trainloads are systematically investigated. It is assessed by the total demand distortion(TDD) for the HSR system.

• 산업경영시스템학회지
• /
• 제24권65호
• /
• pp.11-22
• /
• 2001

Recently, many studies on the supply chain management have been published due to increasing attention placed on the design and performance analysis of the supply chain as a whole. Using the Beer distribution game introduced in Sterman[1995], we develop a simple order-up-to-R inventory model to minimize sum of the inventory holding cost and shortage cost under probabilistic demand. We show that performance of the model is robust through extensive simulation experiment. Applying the model to serially connected supply chain, we observe that, if the unit shortage cost is relatively high, R value computed independently is an optimal solution.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1712-1720
• /
• 2017

In South Korea, minimum reserve rate, which is to satisfy reliability standard, has been determined by simulation result using WASP. But, it is still controversial whether the level of minimum reserve rate is adequate. Thus, in this study, various analyses of minimum reserve rate are being conducted. WASP uses the probabilistic simulation technique to evaluate whether reliability standard is satisfied. In this process, forced outage rate and maintenance periods of each generator play important roles. Especially, the long-term plan can be varied depending on how maintenance periods deal with. In order to model maintenance periods in the probabilistic simulation technique, WASP uses derating method. However, broad analyses have to be conducted because there are various ways including derating method to model maintenance periods which result in different results. Therefore, in this paper, 3 different maintenance outage rate modeling methods are applied to arbitrarily modeled system based on the basic plan for long-term electricity supply and demand of South Korea. Results show impact of each modeling method on minimum reserve rate.

• 한국경영과학회지
• /
• 제37권4호
• /
• pp.197-209
• /
• 2012

This paper studies an emergency service vehicle location problem, where minimum reliability level pre-specified at each demand point is assured. Several models are suggested depending on the busy fraction, which is the time proportion of unavailability for the ambulances. In this paper a new model on computing the busy fraction is suggested, where it varies depending on the distance between the demand point and ambulances, hence it may respond the more realistic situation. The busy fraction for the ambulance location determined by the optimization model is computed by the simulation, and updated through the iterative procedure. It has been shown that the performances of the solutions obtained by the algorithm suggested for the instances appeared in the literature.