• 자원환경지질
• /
• 제25권4호
• /
• pp.447-461
• /
• 1992

본 역의 쥬라기화강암류는 "편마상화강암"과 "대보화강암"으로 분류 (1 : 250,000 전주도폭, 1973) 되어져 있으나, "대보화강섬록암"은 본 연구에서의 거창화강섬록암에 해당된다. 이들 화강섬록암류에 대한 조암광물의 경하기재, 암석화학, 및 저어콘의 형태적 연구를 하였다. 모드조성상 이들은 주로 화강성록암에 해당되지만 편마상화강섬록암은 Trondhjemitic trend를, 거창화강섬록암은 granodioritic trend를 각각 따른다. 이들 두 암체는 모두 칼크-알칼라인 계열이며 I-type (자철석계열)에 속하나, 편마상화강섬록암은 분화말기에 La, Ce, Yb의 enrichment를 겪은 반면, 거창화강섬록암은 분화초기에 Yb의 depletion을 겪은 것으로 생각된다. 사장석은 대체로 올리고클레이스에 해당한다. 흑운모는 (Mg, Fe) 고용체간의 성분변화보다 (Si, Al) 고용체간의 변화가 더 뚜렷하다. 각섬석은 거창화강섬록암에서만 제한적으로 산출되며 tschermakite에 해당한다. 저어콘 주면의 상대적 발달을 보면, 편마상화강섬록암은 대부분 {100}={110}형에 가까운 것들이 많으나, 거창화강섬록암은 {110} 탁월형 (저온형)에서 {100} 탁월형 (고온형)에 이르는 다양한 변화를 보인다. 그러나 이들은 대부분 저온형 마그마 용체내에서 결정화되었다. PPEF (Prism-Pyramid-Elongation-Flatness) 도에서, 편마상화강섬록암은 닫힌 가위형 (closed scissors type), 거창화강섬록암은 열린 가위행 (open scissors type)을 보인다. 이는 거창화강섬록암의 저어콘들이 지각물질 또는 편마상화강섬록암을 형성시킨 잔류마그마와 혼화된 마그마로부터 정출되었음을 암시해 주는 것으로 생각된다.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.83-88
• /
• 2000

multi-beam optical drive is a method to improve the data transfer rate for the optical disc systems by parallel recording and reading on neighboring multi-tracks. In this paper, the beam rotating actuator, which is necessary for the multi-bean optical disc drive to from beam spots on multi-tracks simultaneously, has been developed. The Voice Coil Motor is used as a drive mechanism for high resolution and small size of the actuator. And rotating guide based on link structure is designed for frictionless and axisless rotation of rotating part including dove prism and for rotating in axis of geometric center of dove prism. The characteristics of the actuator are experimented by laser vibrometer, Polytec OFV1102 and a dynamic analyzer, HP35670A. It shows that the actuator has good linearity, rotating range $\pm0.34^\circ$, minimum rotating angle $0.0066^\circ$and natural frequency 113.9Hz. Therefore the actuator can be applied in a multi-beam optical disc system.

• Journal of the Optical Society of Korea
• /
• 제12권1호
• /
• pp.25-30
• /
• 2008

The optical performances of 15-inch edge-lit backlight were simulated by using a Monte Carlo ray-tracing technique. The backlight model was built by combining a wedge-type light guide plate, a diffuser sheet, a tubular fluorescent lamp with a lamp reflector, and two crossed prism sheets. Angular distributions of the luminance on each optical component obtained from simulation were consistent with those obtained from experiments on a real 15-inch backlight. The constructed backlight model was used to evaluate the optical performances of a micro-pyramid film. It was found that the on-axis luminance gain on the pyramid film is higher than that on one prism film but much lower than that on the two crossed prism films. These results suggest that a reliable simulation model can be used to develop new hybrid films and to optimize the optical structure of edge-lit backlight in order to reduce the developmental period.

• 한국안광학회지
• /
• 제4권2호
• /
• pp.147-154
• /
• 1999

구안경(old spectacles)의 렌즈를 사용하고 안경테만 교환하는 경우의 조건에 부합되는 83 명을 대상으로 교환 동기, 테의 크기, 모양, 축의 연화, 양안시에 미치는 프리즘의 영향 등을 알아보았다. 안경테의 교환 동기는 80.4%가 파손이나 테부식에 의한 것이었고, 테의 모양은 타원형 계열이 62.4%, 사각형 계열이 37.6%를 차지하였다. 테의 크기는 구안경테(old frame)의 경우 $49{\Box}18$, 수직 거리가 33mm이었고 신안경테(new frame)가 $47{\Box}17$, 수직거리가 31mm로 작게 선택되는 것으로 나타났다. 신안경의 난시축의 변동 범위는 평균 +3.20~3.80이었다. 수평 방향의 프리즘의 영향을 RAL-RG 915기준에 의해 오차를 평가한 결과, 구안경에서 38.5%의 부적합이 신안경에선 42.2%로 증가하였다. 수직 방향에서 프리즘 변화 방향을 RAL-RG 915기준에 의해 오차를 평가해 보면 0.25${\leq}$1.00와 6.00D이상에서 적합 부적합률의 변동은 없었다. 그러나 1.00${\leq}$6.00에서는 부적합률이 구안경은 24.1%에서 신안경은 33.7%로 증가되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.61.2-61.2
• /
• 2005

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1339-1342
• /
• 2006

We focused on improving of the optical efficiency in the direct BLU. We could achieve the optical efficiency by reducing the thickness of BLU and processing the prism shapes on a reflection sheet. And we were able to reduce the Lamps.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.178-185
• /
• 2000

A set of tests were accomplished in order to get better insight of the basic material properties of masonry made of normal concrete brick and different type of mortar compositions. Three different types of test were performed. Masonry unit and prism were tested by compressive strength test, Masonry wallets were tested by compressive strength test. Masonry wallets were tested in diagonally under tension. A significant influence of different mortar compositions on compression strength of masonry prism was observed, The tests have shown that for diagonal compression three different mode of failure were possible : tension crack along the loaded diagonal sliding along a mortar joint and combined sliding and diagonal crack according to the adhesive strength of a mortar.

• 천문학논총
• /
• 제8권1호
• /
• pp.33-45
• /
• 1993

The variation of instrumental profile for the different scan speed of PDS is estimated as FWHM of the assumed Gaussian Profile. The effects of scan speed and scan aperture of PDS on the objective prism spectrum analysis are investigated for 8 combinations of scan speed and scan aperture. Amomg them. D1 apture with 15 csu is found to be the most optimum choice for measuring KISO objective prism film. We suggest the preliminary test study of the scan speed and aperture for the optimum use of PDS for any massive scan of spectra. The optimum scan speed and aperture depends on the dispersion of spectrum as well as the type of phtographic emulsion.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.594-597
• /
• 2002

플라즈마 화학기상증착(PECVD)법을 이용하여 p-type Si(100) 웨이퍼에 Silicon Oxynitride(SiON) 후막을 SiH$_4$ , $N_2$O, $N_2$ 가스를 혼합하여 증착하였다. Prism coupler측정을 통해 SiON 후막의 굴절률 1.4620~1.5312을 얻었으며, rf power가 180 W에서 5.92$\mu$m/h의 증착률을 나타내었다. 증착변수에 따른 화학적 조성의 영향은 X-ray Photoelectron Spectroscopy(XPS) 을 통하여 관찰하였다. 또한, SiON 후막 증착후에 $1.5\mu$m 부근의 흡수띠를 제거하기 위해 105$0^{\circ}C$의 $N_2$ 분위기에서 2시간 동안 열처리를 행하였다.

• Journal of Microbiology and Biotechnology
• /
• 제33권6호
• /
• pp.753-759
• /
• 2023

The genus Paenibacillus contains a variety of biologically active compounds that have potential applications in a range of fields, including medicine, agriculture, and livestock, playing an important role in the health and economy of society. Our study focused on the bacterium SS4^T (KCTC 43402^T = GDMCC 1.3498^T), which was characterized using a polyphasic taxonomic approach. This strain was analyzed using antiSMASH, BAGEL4, and PRISM to predict the secondary metabolites. Lassopeptide clusters were found using all three analysis methods, with the possibility of secretion. Additionally, PRISM found three biosynthetic gene clusters (BGC) and predicted the structure of the product. Genome analysis indicated that glucoamylase is present in SS4^T. 16S rRNA sequence analysis showed that strain SS4^T most closely resembled Paenibacillus marchantiophytorum DSM 29850^T (98.22%), Paenibacillus nebraskensis JJ-59^T (98.19%), and Paenibacillus aceris KCTC 13870^T (98.08%). Analysis of the 16S rRNA gene sequences and Type Strain Genome Server (TYGS) analysis revealed that SS4^T belongs to the genus Paenibacillus based on the results of the phylogenetic analysis. As a result of the matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF/MS) results, SS4^T was determined to belong to the genus Paenibacillus. Comparing P. marchantiophytorum DSM 29850^T with average nucleotide identity (ANI 78.97%) and digital DNA-DNA hybridization (dDDH 23%) revealed values that were all less than the threshold for bacterial species differentiation. The results of this study suggest that strain SS4^T can be classified as a Paenibacillus andongensis species and is a novel member of the genus Paenibacillus.