• Economic and Environmental Geology
• /
• v.25 no.4
• /
• pp.447-461
• /
• 1992

The Jurassic granitoids in the study area are divided into the "Gneissose granodiorite" and the "Daebo granodiorite" (1 : 250,000 Jeonju Geological map, 1973). The term of Geochang granodiorite was used in this study instead of "Daebo granodiorite". These granitoids were studied in terms of microscopic observation, petrochemistry, and zircon morphology. The granitoids are mostly granodiorite. Two kinds of progressive variation can also be recognized in the modal quartz~alkali feldspar~plagioclase triangular diagram; the Gneissose granodiorite is in accordance with the trondhjemitic (low k) trend, and the Geochang granodiorite with the granodioritic trend (medium k). The granitoids belong to the calc-alkaline series, and are classified into the I-type (magnetite series). Plagioclase ($An_{25.1}{\sim}An_{30.9}$) in the granitoids shows generally an oligoclase composition. Biotite has a wider range in (Si, Al) solution than in (Fe, Mg) solid solution. Hornblende occurs in a few thin sections of the Geochang granodiorite, and is plotted in the tschermakite field. The zircon prism shows a long variation between the {110} dominant type and the {100} dominant type in the Geochang granodiorite, but only the {110}={100} type in the Gneissose granodiorite. However, zircon crystals in the granitoids are mostly crystallized in a low-to-medium temperature magma. In the PPEF (Prism- Pyramid-Elongation-Flatness) diagram, the Gneissose granodiorite shows a closed scissors type, the Geochang granodiorite, a opened scissors type. It indicates that the Geochang granodiorite might originate from the mixed magma with crustal materials or pre-existed residual magma which had formed the Gneissose granodiorite.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.83-88
• /
• 2000

multi-beam optical drive is a method to improve the data transfer rate for the optical disc systems by parallel recording and reading on neighboring multi-tracks. In this paper, the beam rotating actuator, which is necessary for the multi-bean optical disc drive to from beam spots on multi-tracks simultaneously, has been developed. The Voice Coil Motor is used as a drive mechanism for high resolution and small size of the actuator. And rotating guide based on link structure is designed for frictionless and axisless rotation of rotating part including dove prism and for rotating in axis of geometric center of dove prism. The characteristics of the actuator are experimented by laser vibrometer, Polytec OFV1102 and a dynamic analyzer, HP35670A. It shows that the actuator has good linearity, rotating range $\pm0.34^\circ$, minimum rotating angle $0.0066^\circ$and natural frequency 113.9Hz. Therefore the actuator can be applied in a multi-beam optical disc system.

• Journal of the Optical Society of Korea
• /
• v.12 no.1
• /
• pp.25-30
• /
• 2008

The optical performances of 15-inch edge-lit backlight were simulated by using a Monte Carlo ray-tracing technique. The backlight model was built by combining a wedge-type light guide plate, a diffuser sheet, a tubular fluorescent lamp with a lamp reflector, and two crossed prism sheets. Angular distributions of the luminance on each optical component obtained from simulation were consistent with those obtained from experiments on a real 15-inch backlight. The constructed backlight model was used to evaluate the optical performances of a micro-pyramid film. It was found that the on-axis luminance gain on the pyramid film is higher than that on one prism film but much lower than that on the two crossed prism films. These results suggest that a reliable simulation model can be used to develop new hybrid films and to optimize the optical structure of edge-lit backlight in order to reduce the developmental period.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.147-154
• /
• 1999

This study was performed to survey the exchange of frames on 83 persons. We investigated frame size, frame type, binocular prism effect etc. 80.4% among motives of frame-exchanges was a damage or corrosion. The type of frames was round-like 62.4% and 37.6% square-like. The size of frames was $49{\Box}18$ and vertical length 33mm on old-frames, $47{\Box}17$ and 31mm on new-frames. The scope of axis variation was average +3.20~3.80. According to estimation by the rule of RAL-RG 915, the inappropriate horizontal prism effect of new spectacles was 42.2%, more than 38.5% on old spectacles. The inappropriate vertical prism effect was 24.1% on old, 33.7% on new spectacles.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.61.2-61.2
• /
• 2005

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1339-1342
• /
• 2006

We focused on improving of the optical efficiency in the direct BLU. We could achieve the optical efficiency by reducing the thickness of BLU and processing the prism shapes on a reflection sheet. And we were able to reduce the Lamps.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.178-185
• /
• 2000

A set of tests were accomplished in order to get better insight of the basic material properties of masonry made of normal concrete brick and different type of mortar compositions. Three different types of test were performed. Masonry unit and prism were tested by compressive strength test, Masonry wallets were tested by compressive strength test. Masonry wallets were tested in diagonally under tension. A significant influence of different mortar compositions on compression strength of masonry prism was observed, The tests have shown that for diagonal compression three different mode of failure were possible : tension crack along the loaded diagonal sliding along a mortar joint and combined sliding and diagonal crack according to the adhesive strength of a mortar.

• Publications of The Korean Astronomical Society
• /
• v.8 no.1
• /
• pp.33-45
• /
• 1993

The variation of instrumental profile for the different scan speed of PDS is estimated as FWHM of the assumed Gaussian Profile. The effects of scan speed and scan aperture of PDS on the objective prism spectrum analysis are investigated for 8 combinations of scan speed and scan aperture. Amomg them. D1 apture with 15 csu is found to be the most optimum choice for measuring KISO objective prism film. We suggest the preliminary test study of the scan speed and aperture for the optimum use of PDS for any massive scan of spectra. The optimum scan speed and aperture depends on the dispersion of spectrum as well as the type of phtographic emulsion.

• Journal of the Korean Ceramic Society
• /
• v.39 no.6
• /
• pp.594-597
• /
• 2002

Silicon Oxynitride(SiON) thick films on p-type silicon(100) wafers have obtained by using plasma-enhanced chemical vapor deposition from SiH$_4$ , N$_2$O and N$_2$. Prism coupler measurements show that the refractive indices of SiON layers range from 1.4620 to 1.5312. A high deposition power of 180 W leads to deposition rates of up to 5.92${\mu}$m/h. The influence of the deposition condition on the chemical composition was investigated using X-ray photoelectron spectroscopy. After deposition of the SiON thick films, the films were annealed at 1050$^{\circ}C$ in a nitrogen atmosphere for 2 h to remove absorption band near 1.5${\mu}$m.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.6
• /
• pp.753-759
• /
• 2023

The genus Paenibacillus contains a variety of biologically active compounds that have potential applications in a range of fields, including medicine, agriculture, and livestock, playing an important role in the health and economy of society. Our study focused on the bacterium SS4^T (KCTC 43402^T = GDMCC 1.3498^T), which was characterized using a polyphasic taxonomic approach. This strain was analyzed using antiSMASH, BAGEL4, and PRISM to predict the secondary metabolites. Lassopeptide clusters were found using all three analysis methods, with the possibility of secretion. Additionally, PRISM found three biosynthetic gene clusters (BGC) and predicted the structure of the product. Genome analysis indicated that glucoamylase is present in SS4^T. 16S rRNA sequence analysis showed that strain SS4^T most closely resembled Paenibacillus marchantiophytorum DSM 29850^T (98.22%), Paenibacillus nebraskensis JJ-59^T (98.19%), and Paenibacillus aceris KCTC 13870^T (98.08%). Analysis of the 16S rRNA gene sequences and Type Strain Genome Server (TYGS) analysis revealed that SS4^T belongs to the genus Paenibacillus based on the results of the phylogenetic analysis. As a result of the matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF/MS) results, SS4^T was determined to belong to the genus Paenibacillus. Comparing P. marchantiophytorum DSM 29850^T with average nucleotide identity (ANI 78.97%) and digital DNA-DNA hybridization (dDDH 23%) revealed values that were all less than the threshold for bacterial species differentiation. The results of this study suggest that strain SS4^T can be classified as a Paenibacillus andongensis species and is a novel member of the genus Paenibacillus.