• 천문학논총
• /
• 제8권1호
• /
• pp.33-45
• /
• 1993

The variation of instrumental profile for the different scan speed of PDS is estimated as FWHM of the assumed Gaussian Profile. The effects of scan speed and scan aperture of PDS on the objective prism spectrum analysis are investigated for 8 combinations of scan speed and scan aperture. Amomg them. D1 apture with 15 csu is found to be the most optimum choice for measuring KISO objective prism film. We suggest the preliminary test study of the scan speed and aperture for the optimum use of PDS for any massive scan of spectra. The optimum scan speed and aperture depends on the dispersion of spectrum as well as the type of phtographic emulsion.

• 조명전기설비학회논문지
• /
• 제19권1호
• /
• pp.34-39
• /
• 2005

본 논문에서는 Wollaston 프리즘을 이용한 스펙클패턴 전단간섭법(shearography)에서 수동소자인 두 개의 파장판과 편광판의 조합을 통해 각각 90도의 위상천이를 가지는 4개의 스펙클 패턴을 얻고, 이로부터 스펙클패턴의 각 지점에서의 위상을 얻을 수 있는 방법을 제시하였다. 제안된 방법에 사용되는 파장판에 의한 위상오차를 Jones 행렬을 이용하여 분석하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.618-621
• /
• 2008

In this paper a new smoothing method of unstructured viscous grid which can be useful when the ALM(Advacning Layer Method) method is used to generate volume grids of prism cells starting with unstructured triangular surface grids. According to the new method two layers of prism cells in the advancing direction which are found by the vector smoothing method are first generated, and then the position of nodes along the middle layer are adjusted by using spring analogy. It is found that the proposed method improves grid quality of the unstructured viscous volume grids for body shape with convex and concave corners.

• 정보저장시스템학회논문집
• /
• 제8권1호
• /
• pp.33-38
• /
• 2012

To investigate of load/unload performance, FE (finite element) model of conventional suspension and HAMR suspension were made. The FE models were verified by modal analysis. In the loading simulation, the conventional system could stably load onto the disk without contact. On the other hand, the HAMR suspension which had an optical fiber and prism occurred slider - disk contact. In the unloading process, the conventional system was unloaded without contact. However, in the HAMR suspension, the contact between slider and disk was occurred at the moment that the dimple was separated during unload process. Therefore the load/unload performance of HAMR decrease with high stiffness, it is necessary that stiffness of HAMR suspension should reduced with design parameters of optical fiber and prism.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.535-536
• /
• 2006

Researches about micro technology travel lively in these days. Such many researches are concentrated in the field of materials and a process field. But properties of micro materials should be known to give results of research developed into still more. In these various material properties, reliability data such as mechanical, optical, thermal property, etc is the basic property. In this paper, it is measured that is material properties of main BLU(Back Light Unit) components in LCD(Liquid Crystal Display). The pattern shape of prism sheet, diffuser film and reflective plate are measured by variable 3D scanning equipments. It is researched which is the method to measure an optimal 3D pattern shape in each components.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.174-175
• /
• 2000

1946년 S M MacNeille에 의해 연구된 유전체 다층 박막을 이용한 편광광속분리기는 브르스터 각 편광광속분리기(Brewster angle polarizing beam splitter) 혹은 맥닐 프리즘(MacNeille prism)으로 알려져 있으며 지금도 많은 광학계에서 사용되고 있다. 맥닐 프리즘은 두 개의 프리즘 사이의 빗면에 높은 굴절률( $n_{H}$ )을 갖는 물질과 낮은 굴절률( $n_{L}$ )을 갖는 물질을 λ/4 광학두께로 교번으로 한 고반사 다층박막 구조를 갖는다. 각 층의 경계면에서 브르스터 각으로 입사할 경우 p-편광파는 투과하고 s-편광파는 부분적으로 반사한다. 편광광속분리 정도는 p-편광파와 s-편광파의 투과율( $T_{p}$, $T_{s}$ ) 혹은 반사율( $R_{p}$, $R_{s}$ )의 비로 나타내며 이를 소광비(extinction ratio)라 한다. (중략)(중략)략)

• 한국지반공학회지:지반
• /
• 제3권3호
• /
• pp.31-48
• /
• 1987

지중에 매설된 관에는 관위의 흙무게나 지표면상재하중으로 인하여 연직견력이 작용하며, 지진이나 불등침하등으로 인하여 상향하중이 작용하는 경우도 있다. 본 연구에서는 Marston-Spangler이론을 새로운 방법으로 분석하여 관위의 흙무게로 인해 매설권에 작용하는 압력에 관하여 검토하였고, 매설연성관에 대한 재하실험을 실시하여 지표면상재하중으 로 인한 매설관의 거동특성을 연구하였다. 또 매설관의 인발저항(uplifting resistance)이론의 검토와 상향인발실험을 통하여 최대인발저항을 구하는 방법 등을 연구하였다.

• 한국광학회지
• /
• 제16권3호
• /
• pp.217-224
• /
• 2005

LCD Backlight에서 Micro Fresnel Lens Array (MFLA)가 결합된 도광판을 설계${\cdot}$분석하였다. MFLA가 적용된 도광판과 기존의 프리즘 형태의 도광판의 광학적 특성을 전산모의하여 비교한 결과를 나타내었다. MFLA를 이용한 도광판을 사용할 경우 기존의 LCD backlight 장치에서 필요로 했던 프리즘 필름을 대체할 수 있음을 보였다.

• International Journal of Advanced Culture Technology
• /
• 제6권1호
• /
• pp.32-41
• /
• 2018

The aim of this study is to formulate a trust-based business model of Internet services in so called the "trust economy." For it, firstly concepts of trust and trust economy are discussed. Then, we present previous literatures' review of trust in social science prism and trust economy in economic prism. This study classified the literatures' stances with two viewpoints of the 'system' and the 'user'. With this backdrop, we discuss three contradictory stances: Internal optimization vs. external interaction, personal data control vs. orchestration, and end-user vs. ecosystem value. In the result, we formulate a trust-based business model framework with three trust issues in user perspective and suggests three strategic directions related three issues along with representative use cases.

• 산업기술연구
• /
• 제29권A호
• /
• pp.27-36
• /
• 2009

Reliability plays a pivotal role in products safety and quality. DoD RIAC recently developed a new reliability prediction methodology, $217Plus^{TM}$, for electronic systems. It officially replaces the well-known MIL-HDBK-217 and is expected to be widely used. Although theoretic study about $217Plus^{TM}$ and its application towards field systems seem to be attractive, it is also desirable to understand the general background of its development. In this paper, we performed a historical review of the arenas related to reliability prediction. Due to the vast of materials, our scope was limited to the development of $217Plus^{TM}$. We first reviewed Rome Laboratory and RIAC. We then explained the development course of reliability methods, MIL-HDBK-217, PRISM, and 217-Plus. This review will form not only a good understanding of the methodology but a basis for future study. We conclude this study with provision of future research areas.