• Title/Summary/Keyword: prism

Search Result 832, Processing Time 0.03 seconds

Development of Radar QPF Model based on high-resolution gridded precipitation (고해상도 격자 강수자료를 활용한 레이더 QPF 모델 개발)

  • Kim, Ho-Jun;Uranchimeg, Sumiya;Jung, Min-kyu;Kwon, Hyun-Han
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.442-442
    • /
    • 2022
  • 고해상도 시공간적 격자 형태의 레이더 강수는 돌발홍수(flash flood)와 같은 기상재해에 대비하기 위하여 실시간 예측정보로 활용된다. 그러나 대부분의 레이더 강수는 과소 추정되는 경향이 있어 정량적인 보정 과정인 QPE (Quantitative Precipitation Estimation)가 필요하다. 일반적으로 레이더 강수자료 보정은 지점 관측자료를 활용하지만, 본 연구에서는 지상 강수량 기반의 고해상도 격자 강수자료를 생산하여 레이더 강수자료와 직접적으로 비교하고자 한다. 이에 고도와 지형적 특성을 고려한 PRISM(Precipitation-elevation Regressions on Independent Slopes Model) 방법을 사용하여 고해상도 격자기반의 자료를 생성하였다. PRISM 방법은 고도와 지리정보를 독립변수로 갖는 회귀모형 기반의 기후인자 추정 모형이다. 생산된 고해상도 격자 강수자료와 레이더 강수자료를 QPF (Quantitative Precipitation Forecast) 모델의 입력자료로 사용하여 예측결과를 비교하였다. 해당 QPF 모델은 이류(advection)와 확률론적 섭동(stochastic perturbation)을 기반으로 하며, 강수 앙상블 자료를 생산한다. QPF 모델에 대해 투 트랙(two-track) 방법으로 생산된 예측정보를 통해 레이더 강수자료의 격자별 후처리 보정이 가능할 것으로 판단된다.

  • PDF

Accuracy Evaluation of Reflective Sheet Target Total Station for Applying in Cadastral Resurvey (지적재조사 측량에 적용을 위한 반사시트 타깃 토털스테이션 측량의 정확도 평가)

  • Park, Ki Heon;Hong, Sung Eon
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.22 no.4
    • /
    • pp.91-97
    • /
    • 2014
  • In this research, we would try to evaluate the applicability in cadastral resurvey surveying by analysing the accuracy of building boundary surveying using the reflective sheet total station surveying. When we analyse it, we refer the reflective sheet which can supplement not only the difficulties of total station surveying and GPS surveying caused by the diversity of the building structure but also the errors of non prism total station caused by material of the object. Each reflected angles $90^{\circ}$ and $60^{\circ}$, $30^{\circ}$ of RMSE results were analyzed by RMSE between 1.2mm~2.8mm and 2.2mm~4.0mm, 2.5mm~4.4mm for each distance. The result of X RMSE was analyzed to be 0.0043m in a boundary surveying for existing building between prism surveying and reflective sheet surveying, and also Y RMSE was 0.038m. The source of error is estimated that the body of the prism can not be exactly attached to the edge of a building. Therefore, it will be very helpful to use a reflective sheet surveying with a prism in both the limit of collimation and error reductions as a building boundary measurement in cadastral resurvey surveying.

Flowfield Experiments for a Circular Cylinder Having a Front Triangular Prism (정면에 정삼각주를 가진 원주의 유동장 특성실험)

  • Ro, Ki Deok;Han, Sang Yun;Ju, Hyung Gwan;Kang, Ja Un;Bae, Tae Beom;Noh, Woo Kyun
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.39 no.9
    • /
    • pp.751-759
    • /
    • 2015
  • In this study, we investigate the Characteristics of the flowfields of a circular cylinder having a small triangular prism at the upstream side. We measure the fluid force on the circular cylinder and obtain a visualization of the flow fields using particle image velocimetry (PIV). The experimental parameters employed were the width ratios (H/B = 0.2~0.6) of the triangular prisms to the circular cylinder's diameter, and the gap ratios (G/B = 0~3) between the circular cylinder and the triangular prism. We observed that the drag reduction rate and Strouhal number of the circular cylinder increased and then decreased with G/B in the case of the same H/B. The drag reduction rate increased with H/B in the case of the same G/B. In the case where the circular cylinder had a small triangular prism, the stagnation regions were represented in the upstream and downstream sides of the circular cylinder.

Clinical Evaluation of Prism-stabilized Toric Soft Contact Lens Fit (프리즘 안정화 디자인 토릭 소프트 콘택트렌즈 피팅에 대한 임상 평가)

  • Kim, Soo-Hyun;Kim, Jai-Min
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.15 no.2
    • /
    • pp.137-144
    • /
    • 2010
  • Purpose: This study was to evaluate the clinical performance of 1-Day disposable toric soft contact lenses (TSCL) and to compare the visual performance with glasses and TSCL. Methods: In a two-week investigation of 'prism ballast' designed TSCL, occular refractions in 15 (30 eyes) healthy subjects were within the range of -2.75 D TO -8.00 D spherical power and -0.75 DC to -2.25 DC cylinderical power (with-the-rule). Subjects were assessed the clinical performance (orientation, centration, movement, tightness, rotation recovery, symptoms) of TSCL and compared binocular vision and contrast sensitivity with corrected glasses and TSCL at initial and two-week follow-up visits. Results: The prism-ballast design TSCL achieved better orientation, rotation recovery and symptoms over 2 week period. There was no statistically significant difference between spectacles and TSCL with respect to measuring binocular vision and contrast sensitivity. Conclusions: The clinical performance was good with prism-ballast design toric soft contact lenses. Evaluation of binocular vision and contrast sensitivity did not show the differences between spectacles and TSCL correction. This study suggests that TSCL wearers can be achieved similar visual performance for spectacles wearers.

Comparison of Precipitation Distributions in Precipitation Data Sets Representing 1km Spatial Resolution over South Korea Produced by PRISM, IDW, and Cokriging (PRISM, 역거리가중법, 공동크리깅으로 작성한 1km 공간해상도의 남한 강수 자료에서 강수 분포의 비교)

  • Park, Jong-Chul;Kim, Man-Kyu
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.16 no.3
    • /
    • pp.147-163
    • /
    • 2013
  • The purpose of this study is to compare precipitation distributions in precipitation data sets over South Korea produced by three interpolation methods. The differences of precipitation caused by interpolation methods is an important information when the interpolated precipitation data sets were used in researches such as ecological and hydrological modeling as well as regional climate impact studies. In this study, the precipitation data sets were produced by IDW(Inverse Distance Weighting) and Cokriging in this study and the PRISM(Precipitation-elevation Regressions on Independent Slopes Model) data set obtained from Climate Change Information Center of Korea. The spatial resolution of the precipitation data is 1km. As a result, there was a great precipitation difference caused by interpolation methods in data of mountainous watersheds in general. Especially the difference of monthly precipitation was 10~20% or more in the mountainous watersheds near the Military Demarcation Line dividing North and South Korea, Mt. Sobaik, Mt. Worak, Mt. Deogyu, Mt. Jiri and Taeback Mountain Range. It means that a final result of a research can be affected by adopted interpolation method when an interpolated precipitation data set is used in the research for the these study sites.

Measurement of Refractive Index of Liquids by the Maximum and Minimum Deviated Laser Beam (레이저광의 최대.최소 편향법을 이용한 액체의 굴절률 측정)

  • Lee, Jae-Ran;Kim, Sok-Won;Lee, Yong-San
    • Korean Journal of Optics and Photonics
    • /
    • v.19 no.3
    • /
    • pp.182-186
    • /
    • 2008
  • The prism spectrometer is a standard device for the measurement of refractive index; it is used in undergraduate laboratories. Typically, however, lots of attention is required in the alignment, and the accuracy of the obtained refractive index is not so high in spite of the durability of the device. The maximum and minimum deviation method, which compensates the disadvantages of the prism spectrometer, can be composed cost effectively using a length marking tape and a rotating platform. It can measure the refractive indices accurately by utilizing a wide screen. In this study, the equal sided hollow prism whose length is 26 mm was fabricated and measured the refractive indices of seven kind of liquids (pure water, $C_3H_5(OH)_2$, $CCl_4$, $C_6H_4NH_2$, $CS_2$, $C_6H_4(CH_3)_2)$ by using the prism spectrometer and maximum and minimum deviated laser beam method at the wavelengths of He-Ne laser (${\lambda}$= 632.8 nm) and YVO4 laser (${\lambda}$= 532 nm). The result shows that the data obtained by the latter method are more accurate and precise than those obtained by the former device.

Rotational Prism Stitching Interferometer for High-resolution Surface Testing (고해상도 표면 측정을 위한 회전 프리즘 정합 간섭계)

  • In-Ung Song;Woo-Sung Kwon;Hagyong Khim;Yun-Woo Lee;Jong Ung Lee;Ho-Soon Yang
    • Korean Journal of Optics and Photonics
    • /
    • v.34 no.3
    • /
    • pp.117-123
    • /
    • 2023
  • The size of an optical surface can significantly affect the performance of an optical system, and high spatial frequency errors have a greater impact. Therefore, it is crucial to measure the surface figure error with high frequency. To address this, a new method called rotational prism stitching interferometer (RPSI) is proposed in this study. The RPSI is a type of stitching interferometer that enhances spatial resolution, but it differs from conventional stitching interferometers in that it does not require the movement of either the mirror tested or the interferometer itself to obtain sub-aperture interferograms. Instead, the RPSI uses a beam expander and a rotating Dove prism to select particular sub-apertures from the entire aperture. These sub-apertures are then stitched together to obtain a full-aperture result proportional to the square of the beam expander's magnification. The RPSI's effectiveness was demonstrated by measuring a 40 mm diameter spherical mirror using a three-magnification beam expander and comparing the results with those obtained from a commercial interferometer. The RPSI achieved surface testing results with nine times higher sampling density than the interferometer alone, with a small difference of approximately 1 nm RMS.

The Error and the Graphical Presentation form of the Binocular Vision Findings (양안시기능 검사 값의 오차와 그래프 양식)

  • Yoon, Seok-Hyun
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.12 no.3
    • /
    • pp.39-48
    • /
    • 2007
  • The stimulus of accommodation A, the stimulus of convergence C and the prism diopter ${\Delta}$ are reviewed and redefined more obviously. How the A and C are managed in the practice are reviewed and summarized. As a result, the common practical process of the binocular vision findings is most suitable in the case of the $l_c=26.67mm$, where the near distance is measured from the test lens to the near target and its value is 40 cm and the average of the P.D equal to 64 mm. The $l_c$ is the distance between the test lens and the center of rotation. Those values were used at calculating the various values in this paper. The error of the stimulus of accommodation values which are evaluated by the practically used formula (5) are calculated. Where the distance between lens and the principle point of eye is 15.07 mm ($=l_H$). The incremental stimulus of convergence values P' caused by the addition prism $P_m$ are evaluated by the recursion computation method. The P' are varied with the $P_m$, the distance $p_c$ between the prism and the center of rotation, the initial convergence value (or inverse target distance) $C_o$ and the refractive index n of the prism material. The recursion computation method and the other formulas are described in detail. In this paper n=1.7 is used. The two factors by which the P' is increased are exist. The one which is major is the property by which the values of convergence whose unit is ${\Delta}$ are not added in the generally way. The other is the that the actual power of the prism is varied with the angle of incidence light. And the P' is decreased remarkably by an increase in the $p_c$ and $C_o$. The $P^{\prime}/P_m$ are calculated and graphed which are varied with the $p_c$ and $C_o$, where the $P_m=20{\Delta}$, P.D=64 mm and n=1.7. The index n dependence of the $P^{\prime}/P_m$ is negligible (refer to fig. 6). The $p_c$ are evaluated at which the P' equal to the $P_m$ for various $P_m$ (refer to table 1). The actual values of the stimulus of convergence and accommodation which are manipulated simply in the practice are calculated. Two graphical forms are suggested. The one is like as the commonly used one. But the stimulus of convergence and of accommodation values in the practice are positioned at the exact positions when the graphic is made (refer to fig. 9). The other is the form that the incremental stimulus of convergence values caused by the addition prisms are represented at actual positions (refer to fig. 11).

  • PDF

Outcome and risk factors of pediatric hemato-oncology patients admitted in pediatric intensive care unit (소아 중환자실에 입실한 소아 종양/혈액 질환 환자의 예후 및 위험인자)

  • Kim, Bo Eun;Ha, Eun Ju;Bae, Keun Wook;Kim, Seon Guk;Im, Ho Joon;Seo, Jong Jin;Park, Seong Jong
    • Clinical and Experimental Pediatrics
    • /
    • v.52 no.10
    • /
    • pp.1153-1160
    • /
    • 2009
  • Purpose:To evaluate the risk factors for mortality and prognostic factors in pediatric hemato-oncology patients admitted to the pediatric intensive care unit (PICU). Methods:We retrospectively reviewed the medical records of pediatric hemato-oncology patients admitted at the PICU of the Asan Medical Center between September 2005 and July 2008. Patients admitted at the PICU for perioperative or terminal care were excluded. Results:Total 88 patients were analyzed. Overall ICU mortality rate was 34.1%. Mean age at PICU admission was $7.0{\pm}5.7$ years and mean duration of PICU stay was $18.1{\pm}22.2$ days. Hematologic diseases contributed to 77.3% of all the primary diagnoses, and the primary cause of admission was respiratory failure (39.8%). The factors related to increased mortality were C-reactive protein level (P<0.01), ventilation or dialysis requirement (P<0.01), and hematopoietic stem cell transplantation (P<0.05). In all, 3 scoring systems were investigated [Number of Organ System Failures (OSF number), the Pediatric Risk of Mortality III (PRISM III) score, and the Sequential Organ Failure Assessment (SOFA) score]; higher score correlated with worse outcome (P<0.01). The Oncological Pediatric Risk of Mortality (O-PRISM) scores of the 21 patients who had received hematopoietic stem cell transplantation were higher among the non-survivors, but not statistically significant (P=0.203). Conclusion:The PRISM III and SOFA scores obtained within 24 hours of PICU admission were found to be useful as early mortality predictors. The highest OSF number during the PICU stay was closely related to poor outcome.

Induced Prisms of Wearing Glasses Measured by Photographing (사진촬영으로 측정한 착용안경의 유발프리즘)

  • Shin, Hyung-Sup;Jang, Jun-Kyu
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.19 no.4
    • /
    • pp.527-532
    • /
    • 2014
  • Purpose: The matching of the optical center and the pupil center was measured by photographs in wearing glasses. In this study, the influences of the induced prism by the mismatching are studied. Methods: 74 subjects (148 eyes) who were spectacles wearer were participated in this study. The mean age was $29.19{\pm}12.22$ years (range 19-55 years). The facial photographs of subjects were taken while wearing spectacles. The matching of the corneal reflected image and optical center of the spectacle lens in the horizontal deviations, and the vertical deviations were measured by the observation of the photo image. The prisms induced in accordance with various frame type were calculated from the mismatching deviations. Results: The binocular horizontal deviations were $1.55{\pm}1.70mm$ for the metal frame, $1.71{\pm}2.21mm$ for the clings type plastic frame, and $1.15{\pm}1.38mm$ for the plastic frame. In the horizontal direction induced prism, the ratio over the tolerance was 23%. The ratio were the 17.6% at the BI prism, and 5.4% at the BO prism. The binocular vertical deviation comparisons were $3.93{\pm}1.91mm$ for the metal frame, $5.79{\pm}1.93mm$ for the clings type plastic frame, and 1$6.01{\pm}2.94mm$ for the plastic frame. In the vertical direction induced prism, the ratio over the tolerance was 44.6%. Based on the refraction power, the ratio were 12.2% at -0.25${\leq}-3.00$, and 32.4% at -3.00${\leq}-12.00D$. Conclusions: The induced prisms in the horizontal direction were much in the BI prism. The binocular vertical deviations of the glasses.