• The International Journal of Costume Culture
• /
• 제13권2호
• /
• pp.104-117
• /
• 2010

The purpose of this study is to find out the effect of on-the-job experiencing program on the formation of dynamics such as creativity, organizing, and clarity necessary for launching into the society through a cause-and-effect analysis to determine the priority of resources investments and improvements of educational courses. As a result, the selling experience and planned workshop were found to have effect on the creative dynamic that preparatory business starters must secure without fail. This means that e-Fashionn Lab(http://www.bc2d.com) which is an experiencing program, is fully accomplishing its initial objective set up at the time of the system design. In addition, the selling experience and the mini-home page experience were found to have effect on the formation of organizing dynamic of preparatory business starters. This shows that the system design to realize the database of personal friendships and personal information is being used fully as an educational practice instruments. Lastly, the selling experience and planned workshops were found to have effect on the formation of clarity dynamic of preparatory business starters as experiencing characteristic has effect on creativity. However, the community (work room) experience was found to have no effect on the formation of dynamics necessary for preparatory business starters to advance into the society at this study. This signifies that the system input resources should be pushed back in priority and that curriculums and system design should be concentrated on strengthening the selling experience and planned workshop in general.

• 유통과학연구
• /
• 제15권10호
• /
• pp.81-92
• /
• 2017

Purpose - One of the main objectives of this paper is to identify the most effective type of social media and to analyze the priority of blogs by their informational attributes in the aspect of their impacts on word-of-mouth intention(WOM) in on-line markets. Research design, data, and methodology - We set 'attitude' variable in the middle to see if there is mediating effects between blog information and word-of-mouth intention. We conducted a survey by questionnaire and received 206 answers. Employing the OLS statistical methods through the SPSS package, we tested our hypotheses. Results - Some of the main results are the followings. First, blog, micro-blog, and profile-based services showed significant effects on WOM, while Internet community and mini-homepages are not significant. Second, blog has positive impacts on WOM. Third, attitude has perfect mediating effects between blog and WOM. Fourth, in terms of effects on WOM, interactivity shows the first priority and reliability and usability follows. Finally, attitude has a more significant effect for users of 3 types of blog compared with those of 2 types. Conclusions - In this paper, we analyzed the effects of social network services by type and identified the priority among various attributes of information contained in blogs. It would provide businesses with viable strategic options to establish public relations in their sales promotion.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.108-113
• /
• 2015

Plastic injection moulding machine is widely used for many industrial field. It is classified into mandatory safety certification machinery in Industrial Safety and Health Act because of its high hazard. In order to prevent industrial accidents by plastic injection moulding machine, it is necessary for designer to identify hazardous factors and assess the failure modes to mitigate them. This study tabulates the failure modes of main parts of plastic injection moulding machine and how their failure has affect on the machine being considered. Failure Mode & Effect Analysis(FMEA) method has been used to assess the hazard on plastic injection moulding machine. Risk and risk priority number(RPN) has been calculated in order to estimate the hazard of failures using severity, probability and detection. Accidents caused by plastic injection moulding machine is compared with the RPN which was estimated by main regions such as injection unit, clamping unit, hydraulic and system units to find out the most dangerous region. As the results, the order of RPN is injection unit, clamping unit, hydraulic unit and system units. Barrel is the most dangerous part in the plastic injection moulding machine.

• Bulletin of the Korean Chemical Society
• /
• 제26권2호
• /
• pp.297-302
• /
• 2005

The determination of total phenols was accomplished by capillary-high performance liquid chromatography (capillary-HPLC) after nitrosation of the U.S.E.P.A. classified 11 priority pollutant phenols, using the nitrosated parent phenol (POHNO) as a reference for calibration. The optimum mobile phase composition for this analysis was found by examining the effect of changing the percentage of acetonitrile (MeCN) in the mobile phase on retention factors (k values) and peak intensities. As MeCN percentage was increased, k values were reduced and peak intensities were generally increased. From the results obtained, it was found that the optimum mobile phase was 90%(v/v) MeCN solution at pH 8.0, the detection wavelength of 400 nm, and a detection limit (D.L., concentration at signal to noise ratio (S/N) of 3.0) of 4.5 ${\times}$ $10^{-7}$ M. In addition, 10 of the 11 phenols present in mineral or waste water were separated after the nitrosation by capillary-HPLC. The optimum mobile phase for separation was a 40%(v/v) MeCN solution at pH 5.0.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.502-506
• /
• 2006

건설재해는 반복재해가 빈번하게 일어나고 재해 발생 시 대부분이 중대재해이므로 안전관리에 더욱더 철저해야만 한다. 하지만 우리나라 건설 산업에서 안전관리 시스템은 관리기법이나 사고예방을 위한 구체적이고 기술적인 수단은 빈곤하며 단순하고 과학적이지 못하다. 이러한 건설 산업에서 안전관리 부분에서 FMEA를 이용하여 안전관리 중점대상 선정 및 중요도의 수치화를 통하여 안전관리 대상에 대한 관리 체계를 확립하기 위한 과학적이고 체계적인 방안에 대하여 연구하였으며 산업안전관리공단의 중대재해 사례를 통하여 실제 사례를 보여주었다.

• 대한영양사협회학술지
• /
• 제21권1호
• /
• pp.25-36
• /
• 2015

In this study, we attempted to improve hospital food delivery service quality and customer satisfaction by using FMEA (Failure Mode and Effect Analysis), which is applied to the quality control of products in manufacturing plants. Subjective food delivery service quality improvement was judged based on a 5-point likert scale. Traditional FMEA uses an RPN (Risk priority number) to evaluate the risk level of a component or process. The RPN index was determined by calculating the product of severity, occurrence, and detection indexes. In our results, total RPN value (P<0.01) significantly decreased after FMEA introduction, whereas customer satisfaction (P<0.001) and food delivery service quality (P<0.001) significantly increased. Specifically, foodservice errors (P<0.01) and loss cost (P<0.01) were significantly improved by FMEA introduction. Taken together, we suggest that FMEA reduces critical activities and errors in foodservice delivery caused by simple priority selection.

• 한국가스학회지
• /
• 제13권1호
• /
• pp.45-51
• /
• 2009

본 논문은 국내에 건설된 충전소를 분석 검토하여 수소충전소에 대한 안전성 평가를 실시함으로써 수소충전 소의 안전성에 대한 확인과 충전소 설치 시 필요한 기준마련에 기초자료를 제공하는 것이 궁극적인 목표이다. 안전성 평가 방법으로 FMEA (Failure Mode and Effect Analysis)를 사용하였고, 충전소를 크게 4개의 공정(제조, 압축, 저장, 충전)으로 분류하였다. 또한 각각의 발견된 위험요소에 S (severity), O (occurrence), D (detection)의 점수를 부여하여 이 세 요소의 곱의 값인 RPN (Risk Priority Number)의 수치를 이용하여 위험의 우선순위를 정하고, 이를 바탕으로 시나리오를 생성하였다. 생성한 시나리오를 기반으로 사고피해영향평가 결과 주요한 사고 유형으로 jet fire와 폭발이 나타났고, PSA (pressure swing adsorption) 공정 feed line에서의 누출의 경우 원료물질에 따라 CO가스의 농도가 상이할 수도 있으나, CO가스중독 위험성을 함께 예측되었다.

• 한국도서관정보학회지
• /
• 제50권3호
• /
• pp.167-190
• /
• 2019

이 연구는 신체적, 정신적, 심리적으로 과도기적 단계에 있는 초등 고학년 아동을 대상으로 아들러의 개인심리학을 접목한 독서상담 프로그램을 개발하고 이 프로그램이 열등감, 사회적 관심, 생활양식에 미치는 영향을 파악하고자 하였다. 이를 위하여 경기도 S시 소재 K초등학교 4-5학년 아동 20명을 실험집단 10명, 통제집단 10명으로 구성하여 총 12회기에 걸쳐 독서상담프로그램을 적용하였다. 연구의 주요 결과를 요약하면 다음과 같다. 첫째, 개인심리학을 적용한 독서상담 프로그램을 적용한 실험집단은 열등감, 사회적 관심, 생활양식에 통계적으로 유의한 차이가 나타났다. 둘째, 개인심리학을 적용한 독서상담 프로그램의 실험집단은 주관적인 반응이 긍정적으로 나타났으며, 아동의 독서에 대한 흥미와 책에 대한 관심이 향상된 것으로 나타났다.

• 한국통신학회논문지
• /
• 제30권7B호
• /
• pp.433-439
• /
• 2005

본 논문에서는 무선 통신시스템에서 클래스간 비례지연 서비스를 위한 Flow Based Waiting Time Priority (FB-WTP) 스케쥴러를 제안한다. 기존의 스케쥴러는 클래스 단위로 동작하는 유선망의 구조를 그대로 사용하나, 제안된 FB-WTP 스제쥴러는 이와 달리 플로우 단위로 동작을 하며, 네트웍크 운영자가 입력한 클래스간 목표 큐잉 지연 비율은 기존 알고리즘과 같이 거의 동일하게 만족 시키면서도 클래스별 평균 큐잉 지연 성능은 월등히 향상 되었다. 이것은 각 플로우의 채널 환경이 동적으로 변화는 무선 환경에서 FB-WTP는 다중 플로우 다이버시티 효과를 최대한 이용 하기 때문이다. 또한 기존 알고리즘들에서 발생 할 수 있는 HOL 패킷 블록킹 문제가 발생하지 않는다. 성능평가를 위한 모의 실험에서 다중 채널 상태를 고려한 Look-ahead Waiting Time Priority (LWTP) 스케줄링 알고리즘과의 비교 분석으로 제안한 FB-WTP가 클래스간 목표 큐잉 지연 비율을 만족 시킬뿐만 아니라 LWTP에 비해 클래스별 평균 큐잉 지연 특성이 향상됨을 보였다.

• 대한수의학회지
• /
• 제47권2호
• /
• pp.157-162
• /
• 2007

Lactic acid bacteria (LAB) has been regarded as a useful microorganism and tried to manipulate plasmid DNA for increasing the usefulness. Although several methods have been developed to isolate plasmid DNA from Escherichia coli (E. coli), these methods were not sufficient to apply to LAB with exception of O'Sullivan's lysis method. So, we evaluated plasmid DNA extraction from LAB using general E. coli preparation methods and tried to improve the extraction yield and DNA purity by modifying O'Sullivan's alkaline lysis method. To improve the extraction yield, salt and carrier were added to precipitant and those were incubated at $-70{^{\circ}C}$. Only incubation at $-70{^{\circ}C}$ was the effective method of those modifications. Purity of plasmid DNA was improved by two times of each centrifugation and phenol/chloroform extraction. However, DNA was damaged by twice extraction with phenol/chloroform. Also, exclusion of ethidium bromide showed negative effect to purity. Additionally, it was recommended that improvement of the extraction yield may be due to centrifugation at high speed for more time and to dissolving complete DNA pellet before addition of 7.5 M ammonium acetate. Extraction using this modification produced higher quality of plasmid DNA.