• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.177-181
• /
• 2021

Scaffolds protect the sensor in the body. Scaffolds are made of a bioabsorbable polymer. The polymer process is sensitive to humidity. Inside of the 3D printer has been improved to control the humidity. Specimens were produced by injection molding and 3D printer. 3D printed specimens were printed under various humidity conditions. We measured tensile strength of the injection-molded specimen and tensile strength of the 3d printing specimen. We compared tensile strength of the injection-molded specimen and tensile strength of the 3d printing specimen. Tensile strength of the injection-molded specimen is 557 kgf/cm². We confirmed tensile strength of the specimen was highest at 741 kgf/cm² when the humidity was 10 %. We confirmed lower the humidity, higher tensile strength of the polymer product.

• The monthly packaging world
• /
• s.216
• /
• pp.62-67
• /
• 2011

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1085-1091
• /
• 2014

Recently, 3D printing has received increasing attention due to its boundless potentials. Because 3D printing starts from 3D geometry information, computer-aided design (CAD) is an essential technology to build 3D geometry data. These days, education of 3D CAD for engineering students has been changed from the theoretical lecture to practical design training using commercial CAD software. As a result, open-ended design projects have replaced the traditional theoretical examinations to evaluate students' outcomes. However, such design projects are not enough to evaluate students' outcomes because their results are expressed in two-dimensional ways. In this paper, applications of 3D printing in engineering design education are discussed by describing the procedure and outcomes of design projects. It was found that the use of 3D printing could improve students' outcomes by fabricating real physical models out of their designs.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.4
• /
• pp.27-30
• /
• 2003

The effect of fabrication method of catalytic layer on electrode performance has been investigated. Brush, spray gun and screen printer were used as fabrication tool and catalytic layers were formed by several methods in screen printing. Direct screen printing on polymer membrane, screen printing on carbon paper, and their combined method were applied. In the electrode fabricated by the screen printing method, Pt loading of Pt/C catalysts could be cut down to 50%, compared with results by the brushing and spraying methods. The best result of electrode was obtained as 0.6 V, at 1 A/$\textrm{cm}^2$ when catalytic layer was formed by the combined way.

• Journal of Technologic Dentistry
• /
• v.41 no.1
• /
• pp.1-7
• /
• 2019

Purpose: The objectives of this study was to evaluate clinical adaptation of dental prostheses printed by 3 dimensional(3D) printing technology. Methods: Ten study models were prepared. Ten specimens of experimental group were printed by 3D printing(3DP group). As a control group, 10 specimens were fabricated by casting method on the same models. Marginal gaps of all specimens were measured to evaluate clinical adaptation. Marginal adaptations were measured using silicone replica technique and measured at 8 sites per specimen. Wilcoxon's signed-ranks test was used for statistical analysis(${\alpha}=0.05$). Results: Means of marginal adaptations were $95.1{\mu}m$ for 3DP group and $75.9{\mu}m$ for CAST group(p < 0.000). Conclusion : However, the mean of the 3DP group was within the clinical tolerance suggested by the previous researchers. Based on this, dental prosthesis fabricated by 3D printing technology is considered to be clinically acceptable.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.183-192
• /
• 2022

With the growth of the packaging industry, demand on the packaging printing comes in various forms. Customers' orders are diversifying and the standards for quality are increasing. Offset printing is mainly used in the packaging printing since it is easy to print in large quantities. However, productivity of the offset printing decreases when printing various order. This is because it takes time to change colors for each printing unit. Therefore, scheduling that minimizes the color replacement time and shortens the overall makespan is required. By the existing manual method based on workers' experience or intuition, scheduling results may vary for workers and this uncertainty increase the production cost. In this study, we propose an automated scheduling method of parallel offset printing process for packaging printing. We decompose the original problem into assigning and sequencing orders, and ink arrangement for printing problems. Vehicle routing problem and assignment problem are applied to each part. Mixed integer programming is used to model the problem mathematically. But it needs a lot of computational time to solve as the size of the problem grows. So guided local search algorithm is used to solve the problem. Through actual data experiments, we reviewed our method's applicability and role in the field.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.263-271
• /
• 2010

e-Printing is a new manufacturing technology for electronic products and is based on traditional printing technology. The electronic products require a large area to facilitate printing and to be economical. A gravure printing system that supports a roll to roll (R2R) manufacturing process can be used to reduce the cost and to achieve the required accuracy. Many factors such as drying method, drying temperature, tension,-printing velocity, ink viscosity, ink conductivity, pattern accuracy, and dot geometry influence the performance of printed electronics. These factors are closely interrelated. The optimum condition for printing must be determined to enhance the performance of the printed electronics. In this study, lines and areas are printed using a gravure printer with conductive ink under different conditions of the above mentioned factors. The results are analyzed to investigate the influence of various factors on the performance of the printed electronics.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.103-109
• /
• 2010

An ink transfer is modeled and experimentally verified using roll-to-roll electric direct gravure printing process. The ink transfer model based on the physical mechanism for the maximum ink transfer rate is proposed, and experimented by the electric printing machine in FDRC for the relations of the maximum ink transfer rates to the printing pressure, the operating speed, the operating tension, the surface roughness of substrates, and the contact angle between substrate and silver ink. The free ink split coefficient and immobilized ink under the maximum ink transfer rate are calculated by the physical parameter in a printing process and contact angle between substrates and ink. Numerical simulations and experimental studies were carried out to verify performances of the proposed ink transfer model. Results showed that the proposed ink transfer model was effective for the prediction of the amount of transferred ink to the substrate in a direct gravure printing systems.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.55-60
• /
• 2010

Ink transfer process from the printing roll to the moving web was investigated using a CFD technique for the application in R2R printed electronics. In line with the requirement that the web handling speed needs to be increased further for the cost competitiveness, the effects of web moving velocity with relatively complex roll patterns were analyzed. To make the present analysis more realistic, the numerical geometry and the ink properties were selected to match those of the real printing production system. Our numerical results showed that both web handling speed and complex printing-roll patterns influenced the shape of the transferred ink. As the web moving speed approaches towards 30mpm, a significant distortion of the shape of the transferred ink occurred. In the range of pattern width smaller than 100 microns, a phase distortion was also found to occur in all the printing-roll patterns considered in the present work but the ratio of the phase distortion to the line width gets smaller as the width becomes smaller. Thus, the web handling speed and the shape of printing-roll pattern will be important elements for the better printing quality under 100 micron line width range.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.53-61
• /
• 2017

Recently, there has been an increase in the number of web-based three-dimensional (3D) printing-related service platforms, which allow consumers to collect 3D modeling data, make requests for production, and receive goods through a distribution service using the service platform. The application of 3D printing technology has been expanded to the construction field, yet no guidelines for the related service platform or operation examples can be found. Therefore, the functions of 10 web-based 3D printing service platforms actively used in other industries were investigated and analyzed in this study, and the analysis results were used as a guideline to develop a 3D printing service platform for the construction industry. In addition, the design, construction and distribution services to be equipped with the construction 3D printing service integration platform were presented by creating the driving scenario of the platform. As 3D printing technology develops, the overall construction and architectural paradigms for design, construction and distribution will change. To prepare for such changes and to pioneer the digital construction market in the future, the role of the 3D printing service platform is expected to increase continually.