• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.8
• /
• pp.475-481
• /
• 2005

In the existing ICT technique, the mounted electronic devices on the printed circuit board are tested whether the devices are good or not by comparing and measuring the value of the devices after separating the devices to be tested from around it based on the guarding method. But, in case that resistance, inductor and capacitor are configured as a parallel circuit on the circuit pattern, values for each device can not be measured because the total impedance value of the parallel circuit is measured. Accordingly, it is impossible to test whether the parallel circuit is good or not in case that the measured impedance value is within the tolerance error. Also, it is difficult to identify that which device among R, L and C of the parallel circuit is bad in case that the measured impedance value is out of the tolerance error. Accordingly, this paper proposes a test method which can enhance the quality and productivity by separating and measuring accurately R, L and C components from the RLC parallel circuits on the device-mounted printed circuit board. First, the RLC parallel circuit to be test is separated electrically from around it using three-terminal guarding technique. And then R, L and C values are computed based on the total impedance values and phase angles between voltage and current of the parallel circuit measured from two AC input signals with other frequency, Finally, the availability and accuracy of the proposed test method is verified by reviewing the simulation results.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.250-253
• /
• 2007

An evaporated Ti/Pd/Ag contact system is most widely used to make high-efficiency silicon solar cells, however, the system is not cost effective due to expensive materials and vacuum techniques. Commercial solar cells with screen-printed contacts formed by using Ag paste suffer from a low fill factor and a high shading loss because of high contact resistance and low aspect ratio. Low-cost Ni and Cu metal contacts have been formed by using electroless plating and electroplating techniques to replace the Ti/Pd/Ag and screen-printed Ag contacts. Ni/Cu alloy is plated on a silicon substrate by electro-deposition of the alloy from an acetate electrolyte solution, and nickel-silicide formation at the interface between the silicon and the nickel enhances stability and reduces the contact resistance. It was, therefore, found that nickel-silicide was suitable for high-efficiency solar cell applications. The Ni contact was formed on the front grid pattern by electroless plating followed by anneal ing at $380{\sim}400^{\circ}C$ for $15{\sim}30$ min at $N_{2}$ gas to allow formation of a nickel-silicide in a tube furnace or a rapid thermal processing(RTP) chamber because nickel is transformed to NiSi at $380{\sim}400^{\circ}C$. The Ni plating solution is composed of a mixture of $NiCl_{2}$ as a main nickel source. Cu was electroplated on the Ni layer by using a light induced plating method. The Cu electroplating solution was made up of a commercially available acid sulfate bath and additives to reduce the stress of the copper layer. The Ni/Cu contact was found to be well suited for high-efficiency solar cells and was successfully formed by using electroless plating and electroplating, which are more cost effective than vacuum evaporation. In this paper, we investigated low-cost Ni/Cu contact formation by electroless and electroplating for crystalline silicon solar cells.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.1
• /
• pp.5-11
• /
• 2001

Melting behavior and bridge phenomenon of solder paste, which is essential for surface mount technology in pachaging, were investigated. Solder paste of Sn-37%Pb was printed on Cu-pattern of PCB, and heated over melting point. Melting behavior of the paste was observed using CCD-camera. In order to modelize the melting and agglomeration phenomena of paste, two solder balls of 0.76 mm diameter were used. As experimental results, the paste start to melt from the margin of the printed shape. The height of the melted paste decreased from 270 $\mu\textrm{m}$ to 200 $\mu\textrm{m}$ firstly, and finally recovered to 250 $\mu\textrm{m}$ During the melting procedure, pores were evolved from the molted paste. Concerning melting model of solder ball, relationship between contact area of solder ball and soldering time was derived as $\chi^2/t=4r \; \gamma/\eta=7.56 m^2$/s at $280^{\circ}C$.

• The Korean Journal of Community Living Science
• /
• v.23 no.3
• /
• pp.317-328
• /
• 2012

In this study, printing was introduced to the common dip-dyeing method of persimmon juice dyeing so as to develop two different colored persimmon juice dyed fabrics with printings of 'jorangmal' patterns (a national monument) instead of producing a plain textile. Following are the results of a comparative study between the persimmon dyed fabric and undyed fabric, both with printings, in terms of its properties, and hand values. Cotton and rayon were chosen as samples and were compared separately. Firstly, the samples showed differences in terms of clarity and visual sensation depending on the presence of persimmon dye, even if the same pattern and color was used. Secondly, the air permeability of two samples improved after persimmon dyeing even though their thickness increased, and their moisture regain increased as well in all humidity conditions. Thirdly, protectiveness against UV increased in dyed samples, and sweat, sunlight, and compound colorfastness improved in printed dye-fabrics compared to plain dyed ones. Therefore, printing proved to be effective in preventing discoloration. Fourthly, tensile linearity and resilience, bending rigidity, compressive linearity and resilience, and shearing stiffness increased more in the dyed samples compared to undyed ones. However, shearing recovery decreased in both dyed fabrics. Fifthly, the result of its hand value showed that Koshi value increased in all samples than undyed ones, whereas Fukurami, Numeri, and Softosa values decreased. Incorporating printing in persimmon dyeing process could expect creative outcomes not only in today's diverse fashion but in areas of arts or crafts as well.

• Journal of the Korean Society of Costume
• /
• v.33
• /
• pp.41-54
• /
• 1997

The objectives of this study were to find out the relationships between clothing style pre-ferences and self-image and to examine the differences in clothing style preferences ac-cording to marital status educational level and social stratification of women. The drawings of clothing style were designed referring to the catalogues for spring/summer of 1996 and printed by computer 6 styles of suit corresponding to clothing image were selected. Style A is a brown suit decorated with scarf style B a grey suit with stripes C a yellow suit with printed pattern D a grey and beige suit E a chanel suit decorated with corsage and F a blue suit with pleated skirt. The self-image was separated to the actual self-image and the ideal self-image. Samples were 226 women(ages 18 to 37) in Seoul Korea. The results of the study were the followings. 1. Clothing images of 6 styles were estimated; Style A was plain conservative formal and gentle image ; B masculine solid actual dark and plain image; C feminine romantic bright and splendid image; D actual ordinary un-fashionable and plain image; E feminine ten-der romantic and non-active image ; F indi-vidual fshionable open casual sprightly and active image. 2. There were significant relationships be-tween clothing style preferences and realistic self-image. The women who considered them-selves as masculine preferred style B mascu-line and plain image. The women feminine and conservative preferred style E feminine and tender image. The women not to follow the fshion preferred style D ordinary and plain image. The women informal and open pre-ferred the style F casual and active image. 3. There were significant relationships be-tween clothing style preferences and ideal self-image. The women who wanted to be-tween clothing style preferences and ideal self-image. The women who wanted to be con-sidered themselves as feminine and conserva-tive preferred style E feminine and tender im-age. The women who wanted gentle and con-servative preferred style D ordinary and plain image. The women who wanted sprightly pre-ferred the style F casual and active image. 4. There were significant differences in clothing style preferences according to marital status educational level and social stratifi-cation. The women with more eduacation pre-ferred the splendid and the plain image at the same time. The upper class preferred feminine image and lower class casual and active image.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.141-145
• /
• 2008

When the current flows to parallel lines with different length, it is researched that the radiation is occured by the common-mode current radiates, and the small light weight antenna composed of dual elements by using the principle is proposed. However, there is a problem in production about this antenna because this liner antenna is structured by combining with wires. In this paper, we improved this liner antenna, and designed the plane antenna composed of dual elements with different length in the plane printed board to produce and to design easily. Furthermore, the antenna with the wide-band characteristic is also designed in the same board. The radiation pattern is similar to the dipole antenna on account of designing the triangular patch S, the notch and two tapers in patch S, the notch and two tapers in the antenna element. In result, it was able to design the antenna working wider band-width(the bandwidth ratio about 58%, $VSWR{\le}2$).

• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.218-223
• /
• 1999

A single use, screen-printed sensor for the measurement of liquid phase ethanol was developed and its electrochemical performance was investigated. Disposable type edthanol sensor was fabricated by serially screen printing the carbon paste, silverd pasted and insulator inlon a polyester substrate to pattern working and reference electrode sites and electrical contact. Alcohol dehydrogenase(ADH) or alcohol oxidase(AOD) together with appropriate electron transfer mediators was immobilized on the working electrode. To improve the sensitivity and reproducibility of carbon paste electrode, some pretreatment procedures were applied and their resultant electrochemical performance was examined. The disposable type electrochemical ethanol sensor developed in this study conveniently determines the ethanol in liquid samples such as blood and in fermentation process.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.56-59
• /
• 2011

The process conditions for high efficiency industrial crystalline Si solar cells with selective emitter were optimized. In the screen printed solar cells, the sheet resistance must be 50-60V/sq. because of metal contact resistance. But the low sheet resistance causes the increase of the recombination and blue response at the short wavelength. Therefore, the screen printed solar cells with homogeneous emitter have limitations of efficiency, and this means that the selective emitter must be used to improve cell efficiency. This work demonstrates the feasibility of a commercially available selective emitter process, based on screen printing and conventional diffusion process. Now, we improved cell efficiency from 18.29% to18.45% by transition of heavy emitter pattern and shallow emitter doping condition.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.6
• /
• pp.825-830
• /
• 2010

Generally, the copy protection mark and 2D bar-code techniques are widely used for forgery protection in printed public documents. But, it is hard to discriminate truth from the copy documents by using exisiting methods, because of that existing 2D-barcode is separated from the copy protection mark and it can be only recognized by specified optical barcord scanner. Therefor, in this paper, we proposed the forgery protection tehchnique for discriminating truth from the copy document by using watermark inserted 2D-barcord, which can be accurately distinguished not only by naked eye, but also by scanner. The copy protection mark consists of deformed patterns that are caused by the lowpass filter characteristic of digital I/O device. From these, we verified the performance of the proposed techniques by applying the histogram analysis based on the original, copy, and scanned copy image of the printed documents. Also, we suggested 2D-barcord confirmation system which can be accessed through the online server by using certification key data which is detected by web-camera, cell phone camera.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.108-108
• /
• 2007

Inkjet printing is a non-contact and direct writing associated with a computer. In the industrial field, there have been many efforts to utilize the inkjet printing as a new way of manufacturing, especially for electronic devices. The etching resist used in this process is an organic polymer which becomes solidified when exposed to ultraviolet lights and has high viscosity of 300 cPs at ambient temperature. A piezoelectric-driven ink jet printhead is used to dispense $20-40\;{\mu}m$ diameter droplets onto the copper substrate to prevent subsequent etching. In this study, factors affecting the pattern formation such as printing resolution, jetting property, adhesion strength, etching and strip mechanism, UV pinning energy have been investigated. As a result, microscale Etch resist patterning of printed circuit board with tens of ${\mu}m$ high have been fabricated.