• Clean Technology
• /
• v.17 no.4
• /
• pp.306-313
• /
• 2011

Flux or solder is used in soldering process for manufacturing electronic parts such as printed circuit boards (PCB). After soldering process, residual flux and solder paste on the parts should be removed since their residuals could cause performance degradation or failure of parts due to their corrosion and electric leakage. Ozone depletion substances such as 1,1,1- trichloroethane (TCE) and HCFC-141b have widely been using for removal of residual flux and solder paste after soldering process In manufacturing of electronic parts until now. In this study, non-aqueous cleaning agents without flash point were developed and applied to industrial field for replacement of cleaning agents with ozone depletion. In order to develop non-aqueous cleaning agents without ethers, esters, fluoride- type solvents. And their physical properties and cleaning abilities were evaluated, and they were applied to industrial fields for cleaning of flux and solder on the PCB. And vacuum distillation apparatus were operated to determine their operating conditions and recycling yields for recycling of used cleaning agents formulated in this study. As a result of physical properties measurement of our formulated cleaning agents, they were expected to have good wetting and penetrating power since their surface tensions were relatively low as 18.0~20.4 dyne/$cm^2$ and their wetting indices are relatively large. And some cleaning agents holding fluoride-type solvents as their components did not have any flash point and they seemed to be safe in their handling and storage. The cleaning experimental results showed that some cleaning agents were better in their cleaning of flux and solder paste than 1,1,1-TCE and HCFC-141b. And industrial application results of the formulated cleaning agents for cleaning PCB indicated that they can be applicable to industry due to their good cleaning capability in comparison with HCFC-141b. The recycling experiments of the used formulated cleaning agents through a vacuum distillation apparatus also showed that their 91.9~97.5% could be recycled with its proper operating conditions.

• Sijohaknonchong
• /
• v.42
• /
• pp.29-68
• /
• 2015

This article focused on the development and current status of Sijo-chang, the Korean classical vocal genre, which is the text as a fixed form of Korean classical poems. Historically, Sijo-chang has originally emerged from Hyangga鄕歌 during Silla period (BC. 57- AD. 935). However, the current Sijo-chang has been developed from the latter of Joseon朝鮮 period(AD. 1392-1910) in 1800s. Since 1800s, Sijo-chang derived from the Gyeong-je Pyeong sijo京制 平時調, which was established in Seoul, was able to accelerate its musical types and regional characteristics among the Korean peninsula. By setting a clear division of two time periods between 1800s and those periods since 1900s to today, this article mainly explains how Sijo-chang has been developed historically. First of all, in order to appraise the musical styles and characteristics of Sijo-chang in 1800s, comparing the current musical types of Sijo-chang and those printed old score books which has its historical musical characteristics during 1800s is necessary. Secondly, this paper concentrated on the transmitted lineages of representative vocalists among the regional-based Sijo-chang from 1900s to today. During those periods, the Sijo-chang has formed its particular regional-based musical characteristics among the Korean peninsula such as Yeong-je嶺制 of Gyeongsang province慶尙道, Naepo-je內浦制 of Chungcheong province忠淸道 and Wan-je完制 of Cheolla province全羅道. Although it was not a type of regional-based Sijo-chang, as a creation with reference based on certain regional types of Sijo-chang in 1960s, this paper introduced the inheritance process of Seogam-je石菴制 which was made by Jung Gyeong-tae鄭坰兌 named Seogam石菴 as his pen name. Since Seogam-je has been singing as the most influential musical types of Sijo-chang through the mainly southern region of Korean peninsula and even in Seoul, it was highly significant to research it. In addition, this paper elaborately highlighted the developments of various Sijo-chang based on its historical performances, studies, and the composed pieces from the early 1900s or the mid-1900s. In conclusion, in order to set a vigorous development of Sijo-chang, this paper raised several concerns among the future of Sijo-Chang and the significance of its traditional value.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.1
• /
• pp.258-271
• /
• 2019

Recent changes in inter-Korean relations have encouraged South Korean archaeologists' interest in northern cultural heritage and their desire to conduct research. However, it is doubtful how much the South Korea really knows about the cultural ruins in North Korea and the cultural ruins to be found in the DMZ. In Korea, research data on the Japanese colonial period is scattered amongst national institutions and it is not possible to to collect, identify and document the data available in each institution. Typically, the data of Keiichi Ogawa(小川敬吉) is difficult to understand in its printed from. In addition, Ogawa has collected data from several national government agencies, and work is underway to collect architectural data and construct digital archives. This situation will not occur if we publish the data collected so far in digital form. Therefore, there is an urgent need to fully disclose the data related to Cheolwon which is owned by national institutions. If this data is analyzed, sufficient archaeological information can be obtained without excavation. On the other hand, one must wonder if the whole landscape of Cheolwon castle of Taebongguk cand be understood by investigating the interior of Cheolwon castle. This effort should be preceded by a survey on the ruins and the remains of the southern part of the southern boundary line. Rapid development and large-scale arrangement of cultivated land are likely to make it difficult to restore the external landscape related to the tillage demand that is required by the current situation. In the process of restoration of the actual Gyeongwon Line, it has been confirmed that serious irregularity has caused damage and the landscape has been transformed. In order to minimize these risks, it is urgent that we investigate the relics scattered in the southern part of the country, and not devote ourselves to the investigation of Cheolwon. In this regard, how much military, roads, excavation and archaeologists are prepared, centered on Cheolwon and scenery is an important question. I am curious as to how much preparation is provided to the Chulwon-gun and Gangwon-do in terms of administrative assistance, and how much archaeologists and excavation agencies are aware of the archaeological information of the inside and the southern part of the DMZ. Furthermore, how long have people been aware of the archaeological remains on the North Korean side? In order for da iscussion on Cheolwon and scenery to progress, it is necessary to carry out a precise investigation and accumulation of data on the remains in South Korea.

• Composites Research
• /
• v.34 no.4
• /
• pp.241-248
• /
• 2021

As the electric vehicle market grows, there is an issue of light weight vehicles to increase battery efficiency. Therefore, it is going to replace the battery module cover that protects the battery module of electric vehicles with high strength/high heat-resistant polymer composite material which has lighter weight from existing aluminum materials. It also aims to respond to the early electric vehicle market where technology changes quickly by combining 3D printing technology that is advantageous for small production of multiple varieties without restrictions on complex shapes. Based on the composite material mechanics, the critical length of glass fibers in short glass fiber (GF)/polycarbonate (PC) composite materials manufactured through extruder was derived as 453.87 ㎛, and the side feeding method was adopted to improve the residual fiber length from 365.87 ㎛ and to increase a dispersibility. Thus, the optimal properties of tensile strength 135 MPa and Young's modulus 7.8 MPa were implemented as GF/PC composite materials containing 30 wt% of GF. In addition, the filament extrusion conditions (temperature, extrusion speed) were optimized to meet the commercial filament specification of 1.75 mm thickness and 0.05 mm standard deviation. Through manufactured filaments, 3D printing process conditions (temperature, printing speed) were optimized by multi-optimization that minimize porosity, maximize tensile strength, and printing speed to increase the productivity. Through this procedure, tensile strength and elastic modulus were improved 11%, 56% respectively. Also, by post-processing, tensile strength and Young's modulus were improved 5%, 18% respectively. Lastly, using the FEA (finite element analysis) technique, the structure of the battery module cover was optimized to meet the mechanical shock test criteria of the electric vehicle battery module cover (ISO-12405), and it is satisfied the battery cover mechanical shock test while achieving 37% lighter weight compared to aluminum battery module cover. Based on this research, it is expected that 3D printing technology of polymer composite materials can be used in various fields in the future.

• Research in Plant Disease
• /
• v.29 no.4
• /
• pp.331-344
• /
• 2023

More than a year has passed after the 6th edition of 'List of Plant Diseases in Korea (LPDK)' was published in April 2022. The 6.1st edition (2023) of List of Plant Diseases in Korea was made by correcting errors found in the 6th edition of list and adding new diseases reported after the 6th edition. There were 397 corrections from the 6th edition, most of which were simple spelling errors or minor issues. However, 12 diseases were deleted due to duplication or unclear literature proof, and 2 diseases had their diseases' common names changed. We added 158 diseases that were reported before 2021 but not included in the 6th edition, or reported after the 6th edition. After all, 146 diseases were added to the 6,534 diseases in the 6th edition, resulting in a total of 6,680 diseases in the 6.1st edition. Thirty host taxa were also added, increasing the number from 1,390 in the 6th edition to 1,420 in the 6.1st edition. Pathogens were also added to 62 taxa, from 2,400 in the 6th edition, bringing the total to 2,462 taxa in the 6.1st edition. Ultimately, the 6.1st edition (2023) of 'The List of Plant Diseases in Korea' contains 6,680 diseases caused by pathogens of 2,462 taxa on 1,420 hosts. The 6.1st edition is not printed as a book, but is provided through the online 'List of Plant Diseases in Korea' (https://genebank. rda.go.kr/kplantdisease.do).

• Journal of Korean Medical classics
• /
• v.10
• /
• pp.450-493
• /
• 1997

Three-yum and three-yang(三陰三陽) is the change state of yum-yang(陰陽) which is caused by six gi(六氣). They mean the flow of six gi(六氣) which exist throughout the viscera, the channel(經絡), and the skin. But it is not easy to understand the meaning because the contents of the attribute of three-yum and three-yang(三陰三陽), the bolt-leaf-hanges(關闔樞) theory and large or small of gi-blood(氣血多少) which is the main clue that explain it in ${\ll}$Somun(素問)${\gg}$ and ${\ll}$Yeongchu(靈樞)${\gg}$ don't coincide with each other. I, the writer, tried to understand the uncertain meaning and the contents which are written about three points above differently in each of the books that are ${\ll}$Somun(素問)${\gg}$ and ${\ll}$Yeongchu(靈樞)${\gg}$. So, from that the course that the book, ${\ll}$Huangjenegeong(黃帝內經)${\gg}$ is handed down is so relatively simple in a wood block-printed book, that the ${\ll}$Huangjenegeongtaeso(黃帝內經太素)${\gg}$ has less wong-words than the Somun(素問) and the Yeongchu(靈樞), and from that Yangshangsun(楊上善) wrote the note in the ${\ll}$Huangjenegeongtaeso(黃帝內經太素)${\gg}$ by royal order about 100 years former than Wangbing(王氷), as making projects of Yangshangsun(楊上善)'s note and the original of the ${\ll}$Huangjenegeongtaeso(黃帝內經太素)${\gg}$ which has relation to the yum-yang(陰陽) attribute of three-yum and three-yang(三陰三陽), the bolt-leaf-hanges(關闔樞) theory, and the large or small of gi-blood(氣血多少) and researching the Yangshangsun(楊上善)'s theory. The result is summarized like this. First, wherease the order of the change of three-yum and three-yang(三陰三陽) which is explained by Yangshangsun(楊上善) consider the change of yangi(陽氣) in body most important, the order of the change gaeggi(客氣)'s three-yum and three-yang(三陰三陽) considers chungi(天氣) most important, and the order of jugi(主氣)'s three-yum and three-yang(三陰三陽) considers jigi(地氣)'s change of ohaeng(五行) most important. If the order of change three-yum and three-yang(三陰三陽) in the ${\ll}$Huangjenegeongtaeso(黃帝內經太素)${\gg}$ is considered, each of taeyang(太陽) and soyum(少陰) are expressed as the base of yum-yang(陰陽) and yangmeong(陽明) and taeyum(太陰) are expressed as the palmy days of yum-yang(陰陽), soyang(少陽) and gyolyum(厥陰) are expressed as pacemaker(樞杻) which controls the change of yum-yang(陰陽). Thus, each has something in common that is fettered by the inside and outside. In the flow of channel(經絡), taeyang(太陽) and soyum(少陰) take charge of the behind of body, yangmeong(陽明) and taeyum(太陰) take charge of the front of body and soyang(少陽) and gyolyum(厥陰) take of the side of body. Second, in Yangshangsun(楊上善)'s bolt-leaf-hanges(關闔樞) theory, three-yum(三陰) is regarded as inside, three-yang(三陽) as outside, so when bolt, leaf and hanges fulfil their duties in inside and outside, the life(life force) is thought to be revealed normally. It is impossible to understand the bolt-leaf-hanges with the conception of the inside and outside which divide three-yum and three-yang(三陰三陽) into taeyang-soyum(太陽-少陰), yangmeong-taeyum(陽明-太陰), soyang-gyolyum(少陽-厥陰) according to yum-yang(陰陽) attribute, hence it need the special conception that is taeyang(太陽)-taeyum(太陰), yangmeong(陽明)-gyolyum(厥陰), soyang(少陽)-soyum(少陰) which center on their duties in inside and outside. In the denunciation of the word open(開) and bolt(關), because Yangshangsun(楊上善) said that the duities of taeyang(太陽) and taeyum(太陰) are shutter(閉禁), bolt(關) is coincided with that significance. Third, with explaining the large or small of gi-blood(氣血多少) of three-yum and three-yang(三陰三陽), Yangshangsun(楊上善) expressed the inside and outside either in the same way or differently. Because the inside and outside is interior of body and exterior of body, it is the explanation that is noticed by the fact that the property of large or small of gi-blood(氣血多少) is either able to be same or different. In this viewpoint, if we unite the contents about large or small of gi-blood(氣血多少) of ${\ll}$Somun(素問)${\gg}$, ${\ll}$Yeongchu(靈樞)${\gg}$, we will find that the descriptions of large or small of gi-blood(氣血多少) of three-yang(三陽) in ${\ll}$Somun(素問)${\gg}$ ${\ll}$Yeongchu(靈樞)${\gg}$ correspond with the ${\ll}$Huangjenegeongtaeso(黃帝內經太素)${\gg}$, but in three-yum(三陰), the contrary presentations exit. The reason is that large or small of gi-blood(氣血多少) of three-yum(三陰) isn't only expressed as che(體) in the point of che-yong(體用), but as a point of yong(用) that is a phenomenon. As researching the original of ${\ll}$Huangjenegeongtaeso(黃帝內經太素)${\gg}$ and Yangshangsun(楊上善)'s notes as a center about three problems that are yum-yang(陰陽) attribute, the bolt-leaf-hanges(關闔樞) and large or small of gi-blood(氣血多少) of three-yum and three-yang(三陰三陽), I, the writer, tried to explain the part which is written differently or has uncertain conception in the book ${\ll}$Somun(素問)${\gg}$ and the book ${\ll}$Yeongchu(靈樞)${\gg}$, but the concrete result of the work like this will be judged according to the question how many theories are correspondent with real presence at a sickbed. Hence, the work to veryfy the theories in the future will be left as assignment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.1
• /
• pp.124-133
• /
• 2009

Demand for the high quality barley with fibroid material and functional substances has been increasing in recent although the amount of barley consumption decreased drastically during the last two decades. But the limited information on quality of barley makes consumers hard when they purchase barley for their own consumption. Therefore, 51 brand barley, .i.e., 28 naked barley and 23 waxy barley from supermarkets and 10 polished barley from local markets were collected, and their external quality were analyzed to provide basic information on brand barley. Among 51 brand barley, 56% were 1kg package and 25% were 800 g package and there was no significant difference ($1{\pm}3.62\;g$) between printed and actual weighs. The weight of 1,000 grains of naked barley and waxy barley ranged $18.6{\sim}26.7\;g$ and $14.6{\sim}24.7\;g$, respectively. Thousand grain weight of 38% of naked barley ranged $20{\sim}22\;g$, while that of 43% of waxy barley ranged $18{\sim}20\;g$. The ratio of normal grains was 88% and 94% for naked barley and waxy barley, respectively, when separated with 1.7 mm sieve. Although 82% of brand barley products were free from foreign substances, in 18% of brand barley products, sands, pieces of cloth and wood, other kinds of grain and insect larvae were found, Average test weight of brand barleys was $843g{\cdot}L^{-1}$ with range of $805{\sim}917g{\cdot}L^{-1}$. Water content was less than 14% in 7.8% of barley products, while it was $14{\sim}15%$ in 62.7% of them. Average whiteness of brand barley was 31.06, while waxy barley had higher whiteness with 27.28 than naked barley with 34.16. Heated water uptake rate of milled naked barley and milled waxy barley were 215.4% and 231.7%, respectively, while expansion rate of milled naked barley and milled waxy barley were 379.7% and 401.6%, respectively. Barley from local markets were as good as brand barley products in 1,000 grain weight, ratio of normal grains, inclusion of foreign substances, test weight, water content, whiteness, water uptake rate, and expansion rate, but they showed higher ratio of foreign substances included.

• Journal of Nutrition and Health
• /
• v.41 no.8
• /
• pp.870-886
• /
• 2008

The purposes of this study were to (a) analyze school foodservice employees' knowledge and performance degree of HACCP system and (b) provide the basic data for planning the strategies which can be performed for systematic HACCP system in school foodservice. For these purposes, the subjects included 91 dieticians (a response rate 98.9%) and 270 foodservice employees (a response rate 98.2%) at school in Jeju city and they were surveyed from October 21 to November 4, 2006. The data were analyzed by descriptive analysis, reliability analysis, t-test, ANOVA (Duncan multiple range test) and Pearson's correlation coefficients using the SPSS Win Program (version 12.0). In terms of the number of training practice, the result of sanitary training indicated that the dieticians who trained the employees more than once per a week (48.6%) or everyday (36.3%) were 84.7%. And the dieticians who were higher age, full-time job, and working at middle school implemented significantly more training the employees. In the training methods, 40.7% of dieticians used the oral presentation and 37.4 % utilized the printed matters. Also, most of employees (98.1%) have experienced for the training, 39.6% of them did not have regular training experience and 40.7% of them responded that they were understanding the HACCP system well. The result of employees' knowledge level of HACCP system reported that the items of the personal hygiene scored the highest (92.3 points) whereas the items of CCP3 scored the lowest (58.3 points) as the average being 84.2 points (out of 100 scale). In terms of the performance degree of HACCP system, the average was 4.40 (out of 5 scale), the items of the personal hygiene scored the highest as 4.51 whereas the items of CCP2 scored the lowest as 4.31 points. The dieticians' perception degree of employees' performance degree in HACCP system showed that the average was 4.13 (out of 5 scale), so it was significantly lower than actual performance degree as average 4.40 (out of 5 scale). Additionally the employees' knowledge level was positively correlated to performance degree and employees' knowledge level of CCP3, CCP4, and the personal hygiene significantly influenced to the HACCP performance degree. Finally, the dieticians have to recognize correctly the employees' performance degree and on the basis of it must plan the sanitary training which has a proper contents and methods to enhance the employees' knowledge level and achieve more systematic HACCP system in school foodservice.

• Journal of Food Hygiene and Safety
• /
• v.21 no.4
• /
• pp.231-237
• /
• 2006

Nowadays the teabag is worldwide used for various products including green tea, tea, coffee, etc. since it is convenient for use. In case of outer packaging printed, however, there is a possibility that the plasticizers which is used for improvement in adhesiveness of printing ink may shift to inner tea bag. In this study, in order to monitor residual levels of plasticizers in teabags, we have established the simultaneous analysis method of 9 phthalates and 7 adipates plasticizers using gas chromatography (GC). These compounds were also confirmed using gas chromatography-mass spectrometry (GC-MSD). The recoveries of plasticizers analyzed by GC ranged from 82.7% to 104.6% with coefficient of variation of $0.6\sim2.7%$ and the correlation coefficients of each plasticizer was $0.9991\sim0.9999$. Therefore this simultaneous analysis method was showed excellent reproducibility and linearity. And limit of detection (LOD) and limit of quantitation (LOQ) on individual plasticizer were $0.1\sim3.5\;ppm\;and\;0.3\sim11.5\;ppm$ respectively. When 143 commercial products of teabag were monitored, no plasticizers analysed were detected in filter of teabag products. The migration into $95^{\circ}C$ water as food was also examined and the 16 plasticizers are not detected. In addition we carried out analysis of heavy metals, lead (Pb), cadmium (Cd), arsenic (As) and aluminum (Al) in teabag filters using ICP/AES. $Trace\sim23{\mu}g$ Pb per teabag and $0.6\sim1718{\mu}g$ Al per teabag were detected in materials of samples and Cd and As are detected less than LOQ (0.05 ppm). The migration levels of Pb and Al from teabag filter to $95^{\circ}C$ water were upto $11.5{\mu}g\;and\;20.8{\mu}g$ per teabag, respectively and Cd and As were not detected in exudate water of all samples. Collectively, these results suggest that there is no safety concern from using teabag filter.

• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.41-52
• /
• 2020

Purpose: To find out the dosimetric usefulness, setup reproducibility and efficiency of applying 3D Bolus by comparing two treatment plans in which Commercial Bolus and 3D Bolus produced by 3D Printing Technology were applied to the neck during VMAT treatment of Hypopahrynx Cancer to evaluate the clinical applicability. Materials and Methods: Based on the CT image of the RANDO phantom to which CB was applied, 3D Bolus were fabricated in the same form. 3D Bolus was printed with a polyurethane acrylate resin with a density of 1.2g/㎤ through the SLA technique using OMG SLA 660 Printer and MaterializeMagics software. Based on two CT images using CB and 3D Bolus, a treatment plan was established assuming VMAT treatment of Hypopharynx Cancer. CBCT images were obtained for each of the two established treatment plans 18 times, and the treatment efficiency was evaluated by measuring the setup time each time. Based on the obtained CBCT image, the adaptive plan was performed through Pinnacle, a computerized treatment planning system, to evaluate target, normal organ dose evaluation, and changes in bolus volume. Results: The setup time for each treatment plan was reduced by an average of 28 sec in the 3D Bolus treatment plan compared to the CB treatment plan. The Bolus Volume change during the pretreatment period was 86.1±2.70㎤ in 83.9㎤ of CB Initial Plan and 99.8±0.46㎤ in 92.2㎤ of 3D Bolus Initial Plan. The change in CTV Min Value was 167.4±19.38cGy in CB Initial Plan 191.6cGy and 149.5±18.27cGy in 3D Bolus Initial Plan 167.3cGy. The change in CTV Mean Value was 228.3±0.38cGy in CB Initial Plan 227.1cGy and 227.7±0.30cGy in 3D Bolus Initial Plan 225.9cGy. The change in PTV Min Value was 74.9±19.47cGy in CB Initial Plan 128.5cGy and 83.2±12.92cGy in 3D Bolus Initial Plan 139.9cGy. The change in PTV Mean Value was 226.2±0.83cGy in CB Initial Plan 225.4cGy and 225.8±0.33cGy in 3D Bolus Initial Plan 224.1cGy. The maximum value for the normal organ spinal cord was the same as 135.6cGy on average each time. Conclusion: From the experimental results of this paper, it was found that the application of 3D Bolus to the irregular body surface is more dosimetrically useful than the application of Commercial Bolus, and the setup reproducibility and efficiency are excellent. If further case studies along with research on the diversity of 3D printing materials are conducted in the future, the application of 3D Bolus in the field of radiation therapy is expected to proceed more actively.