• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.112-116
• /
• 2002

In this paper, the active integrated antenna(AIA) using a wideband printed dipole antenna and a balanced amplifier is designed and fabricated. The proposed active printed dipole antenna has characteristics of easy matching, wide bandwidth and higher output power To feed balanced signal to printed dipole, a Wilkinson power divider and delay lines are used. The measured result shows that, at 6 GHz center frequency, the impedance bandwidth is 22 % (VSWR < 2), 3 dB gain bandwidth is 28 %, the maximum gain is 14.77 dBi, and output power at P1 dB point is 23 dBm.

• Journal of electromagnetic engineering and science
• /
• v.19 no.2
• /
• pp.115-121
• /
• 2019

This paper presents the effects of the position of the split of a split-ring resonator (SRR) on the performance of a composite broadband printed dipole antenna. The antenna is made of two printed dipole arms enclosed by two rectangular and identically printed SRRs. One dipole arm and the SRR are printed on the top side of the substrate, while the other dipole arm and SRR are printed on the bottom side of the same substrate. By changing the position of the split on the SRR, different antenna characteristic values are obtained, namely, for impedance bandwidth and radiation patterns. The split position is thus a critical parameter in antenna design, because it influences the antenna's major performance immensely. Different split positions and their consequences for antenna performance are demonstrated and discussed. The antenna generates linearly polarized radiations, and it is computationally characterized for broadband characteristics. The optimized compact antenna has overall dimensions of 9.6 mm × 74.4 mm × 0.508 mm (0.06λ × 0.469λ × 0.0032λ at 1.895 GHz) with a measured fractional bandwidth of 60.31% (1.32 to 2.46 GHz for |S₁₁| <-10 dB) and a radiation efficiency of >88%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1033-1038
• /
• 2022

In this paper, the design of a printed dipole antenna fed by broadside coupled striplines (BCS) for the 3.5GHz band is described. The two fins of the bow tie are, respectively, on the two sides of the substrate. The feeding balanced lines adopted for 1×2 array are the BCS. The obtained numerical results are in good agreement with experimental data. Through experiments with printed dipole antennas of various extended angles, the printed dipole antenna exhibits the wide bandwidth in the desired frequency band, which has a bandwidth of 28% for VSWR < 2.0 : 1. And within this bandwidth, This printed dipole antenna achieves a stable radiation pattern. It is found that the narrow band and feeding for array characteristic which is a disadvantage of the conventional printed dipole antenna can be improved. The radiation pattern showed omnidirectional characteristics and the maximum gain was about 4.4dBi.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2003-2008
• /
• 2013

In this paper, a design method for a ultra-wideband printed semi-circular-shaped dipole antenna operating in the band of 1-15 GHz is studied. The effects of the gap between the two arms of the semi-circular-shaped dipole and the radius of the semi-circle on the input reflection coefficient and gain characteristics are examined to obtain the optimal design parameters. The optimized printed semi-circular-shaped dipole antenna is fabricated on an FR4 substrate and the experimental results show that the antenna has a desired extremely wideband characteristic with a frequency band of 1-15 GHz (175%) for a VSWR < 2.

• Journal of electromagnetic engineering and science
• /
• v.4 no.1
• /
• pp.8-12
• /
• 2004

In this paper, a triple-band printed dipole antenna using parasitic elements is proposed for the multiple wireless services. The proposed antenna is designed and experimentally analyzed at the bands of PCS, IMT-2000, and ISM services. To achieve triple frequency operation, the proposed antenna contains two parasitic elements, which act as additional resonators by coupling from the driving dipole antenna. From the measured results, the resonant frequencies of this antenna are 1.79 ㎓, 2.03 ㎓, and 2.41 ㎓ and the measured impedance bandwidths are 90 MHz(1760∼1850 MHz), 210 MHz(1,930∼2,130 MHz), and 30 MHz(2,400∼2,430 MHz) for VSWR<2. The measured antenna gains are 2.14 ㏈i, 0.9 ㏈i, and 0.5 ㏈i, respectively. Antenna parameters for trifle-band operation are investigated and several antenna characteristics are discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.67-68
• /
• 2013

In this paper, a super wideband printed dipole antenna operating in the band of 1-15 GHz is studied. A semi-circular-shaped dipole element is used to obtain a super wideband characteristic. Optimal design parameters are obtained by analyzing the effects of the gap between the two arms of the semi-circular-shaped dipole and the radius of the semi-circle on the input reflection coefficient and gain characteristics. The optimized printed semi-circular-shaped dipole antenna is fabricated on an FR4 substrate with a dimension of $100mm{\times}100mm$. Experimental results show that the antenna has a desired super wideband characteristic with a frequency band of 1-15 GHz (bandwidth ration 15:1, 175%) for a VSWR < 2.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.2
• /
• pp.53-55
• /
• 2011

The printed wide band monopole antenna having characteristics of dipole by modified coplanar wave guide(CPW) ground plane is presented. We are called a slot-arm printed monopole antenna and investigated the effect of the surface currents of the radiator on ground plane. The proposed antenna is treated as two asymmetric dipoles with the included angle of $90^{\circ}$ degrees which lie along Z-direction symmetrically. It is observed that the effect of the surface currents on the radiation patterns is similar to that of the corresponding dipole. The length and width of the ground plane correspond the radius and length of the dipole respectively. This approach is also valid to general printed monopole antennas. The simulation impedance bandwidth of the proposed antenna the range of 2.4 to 4.6 [GHz] for a voltage stand wave ratio (VSWR)${\leq}$2 and got pick gain of 6 [dBi]. So the proposed antenna is satisfied the requirement of the industry science medical (ISM) band operation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.677-682
• /
• 2004

In this paper, A novel spatial power combiner with wideband printed dipole antennas and balanced amplifier is proposed. The wideband spatial power combiner is proposed to improve power capability and bandwidth by using balanced amplifier and wideband printed dipole antenna, respectively, The proposed 4${\times}$1 spatial power combiner with those components has the characteristics that the 3-dB bandwidth is 1.02 GHz (17 ％), and the effective isotropic power gain (EIPG) is 24.04 dB at 6 GHz. Also, power combining efficiency is 68.69％.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.267-272
• /
• 1999

In general, printed antennas have a narrow bandwidth characteristic and many people want to find out the method of bandwidth improvement through complicated procedures. So we want to reform the conventional printed antenna characteristic by using the folded dipole's superiority to unit dipole. But it is hard to feed the printed folded dipole antenna, we use the CPW, which is widely used in microwave IC or MMIC applications and have many advantages to the conventional microstrip line, to feed the printed folded slot antenna. It is confirmed that the improvement in the bandwidth characteristic of CPW fed folded slot antenna, as much as 20%, through the measurement of designed and implemented antenna.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.61-62
• /
• 2018

In this paper, we studied a wideband double-sided dipole antenna operating at 3.5 GHz (WiMAX) band. The each printed dipoles are placed on the both sides of the substrate. It can be easily implemented and is suitable for connection with an active circuit. In order to obtain wideband printed dipole characteristics, thick rectangular shaped dipole is adopted. Feeding Circuit for dipole array and balun were designed for impedance matching with a $50{\Omega}$ microstrip feed line. The antenna is designed by simulation for an operation in the frequency range of 3.4~3.7 GHz Simulation results show that the maximum gain in the 3.5 GHz band is 5.5 dBi and the bandwidth with VSWR less than 2 is about 1 GHz.