• Medical Lasers
• /
• 제10권2호
• /
• pp.76-81
• /
• 2021

Biological tissues and organs are composed of different arrays of cells, biochemical cues, and extracellular matrices arranged in a complex microarchitecture. Laser-Assisted Bioprinting (LAB) is an emerging and promising technology that is reproducible with high accuracy that can be used for fabricating complex bioengineered scaffolds that mimic tissues and organs. The LAB process allows researchers to print intricate structural scaffolds using cells and different biomaterials essential for facilitating cell-scaffold interaction and to induce tissue and organ regeneration which cannot be achieved in a traditional scaffold fabrication. This process can fabricate artificial cell niches or architecture without affecting cellular viability and material integrity. This review tackles the basic principles and key aspects of Laser-Assisted Bioprinting. Recent advances, limitations, and future perspectives are also discussed.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2020년도 추계학술발표대회
• /
• pp.725-728
• /
• 2020

Light Field Rendering 을 이용하여 성능이 떨어지는 Low resolution 카메라 장비로 얻는 영상의 한계를 극복하고, Image Processing 기술로 직접 조정해야 해결할 수 있는 수차 및 성능 문제 해결한다. 저가형 장비, 렌즈를 사용하여도 컴퓨터기반 처리를 이용하여 물리적인 한계를 극복한 간이 광학현미경을 만들고자 함. 3D print 를 이용한 뼈대구조를 만들고, 저렴한 raspberry pi 임베디드 플랫폼을 이용하여 설계도만 있다면, 누구나 쉽게 만들 수 있기에 많은 사람들이 이 분야에 더 쉽게 다가설 수 있게 한다.

• 한국재료학회지
• /
• 제33권7호
• /
• pp.285-294
• /
• 2023

Porous ceramics are used in various industrial applications based on their physical properties, including isolation, storage, and thermal barrier properties. However, traditional manufacturing environments require additional steps to control artificial pores and limit deformities, because they rely on limited molding methods. To overcome this drawback, many studies have recently focused on fabricating porous structures using additive manufacturing techniques. In particular, the binder jet technology enables high porosity and various types of designs, and avoids the limitations of existing manufacturing processes. In this study, we investigated process optimization for manufacturing porous ceramic filters using the binder jet technology. In binder jet technology, the flowability of the powder used as the base material is an important factor, as well as compatibility with the binder in the process and for the final print. Flow agents and secondary binders were used to optimize the flowability and compatibility of the powders. In addition, the effects of the amount of added glass frit, and changes in sintering temperature on the microstructure, porosity and mechanical properties of the final printed product were investigated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.592-595
• /
• 2004

Recently the numbers of patent about the technology for mobile payment with Ie or bluetooth-chip are being increased more and more. The reasons of patent increment for mobile payment are advancement of wireless internet technology and rising of customer's request for it. The customer wants to be able to pay for purchase, tax and aid with own mobile phone. So every mobile service provider applies for patents about that competitively. And in the near future the biometrics is generalized in the mobile payment system. Especially the payment service of iris recognition is significant technique in this area for the future prospect. The biometrics of iris is an accurate authentication method because it has about 250 distinguish parameters to the finger print's 30. The biometrics of iris can recognize and identify a person for 2 seconds. But the image of iris is changed by transformation of body in the life. And the existing iris authentication system has problem that can be miss-recognized. In this paper, we propose the new method that reduces miss-recognizing rate with Renewable Iris Authentication Algorithm(RIAA) in mobile system.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 춘계학술발표논문집
• /
• pp.167-173
• /
• 2006

Deinking is a series of unit operations designed to detach ink from cellulose fibers and separate the dispersed ink from the pulp slurry. Deinking chemicals are process aids that enable expensive mill equipment used in these unit operations to operate more efficiently - often much more efficiently. We propose the blended deinking agent with cellulolutic enzymes and synthetic collector in deinking pulp of conventional alkaline method. The deinking efficiency of old news print in alkaline pH was enhanced with enzyme treatments. The brightness of deinked pulp was increased with less residual ink particles and yield of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method. Enzymes in biomass were use to Chemical Deinking for reduce environment pollution through surfactant and improve surfactants. examining into compatibility Enzymes and surfactants, these new materials are studied efficiency of deinking efficiency.

• 한국정보보호학회:학술대회논문집
• /
• 한국정보보호학회 2006년도 하계학술대회
• /
• pp.123-132
• /
• 2006

Biometric-based authentication can provide strong security guarantee about the identity of users. However, security of biometric data is particularly important as the compromise of the data will be permanent. To protect the biometric data, we need to store it in a non-invertible transformed version. Thus, even if the transformed version is compromised, the actual biometric data remains safe. In this paper, we propose an approach to protect finger-print templates by using the idea of the fuzzy vault. Fuzzy vault is a recently developed cryptographic construct to secure critical data with the fingerprint data in a way that only the authorized user can access the secret by providing the valid fingerprint. We modify the fuzzy vault to protect fingerprint templates and to perform fingerprint verification with the protected template at the same time. This is challenging because the fingerprint verification is performed in the domain of the protected form. Based on the experimental results, we confirm that the proposed approach can perform the fingerprint verification with the protected template.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.687-687
• /
• 2013

In rearpoint contact solar cell and the PERC (passivated emitter rear contact) type cell, surfaces were passivated by SiO2 or Al2O3 to increase solar cell efficiency. Therefore, we have investigated the effect of surface passivation for crystalline silicon solarcell using mass-production atomic layer deposited (ALD) Al2O3. The patttern which consists of cylinders with 100um diameter and 5um height was formed by PR patterning on Si (100) substrate and then Al2O3 of about 10nm and 20nm thickness was deposited by ALD. The pattern in 10 nm Al2O3 film was removed by dipping in aceton solution for about 10 min but the pattern in 20 nm Al2O3 film was not. The influences of process temperature and heat treatment were investigated using microwave photoconductance decay (PCD) and Quasi-Steady-State photoconductance (QSSPC). The solar cell process used in this work combines the advantage of using the applicability of a selective deposition associated with a ALD passivation and the use of low-cost screen print for the contacts formation.

• Journal of Information Processing Systems
• /
• 제14권5호
• /
• pp.1114-1135
• /
• 2018

A multiple classification system based on a new boosting technique has been approached utilizing different biometric traits, that is, color face, iris and eye along with fingerprints of right and left hands, handwriting, palm-print, gait (silhouettes) and wrist-vein for person authentication. The images of different biometric traits were taken from different standard databases such as FEI, UTIRIS, CASIA, IAM and CIE. This system is comprised of three different super-classifiers to individually perform person identification. The individual classifiers corresponding to each super-classifier in their turn identify different biometric features and their conclusions are integrated together in their respective super-classifiers. The decisions from individual super-classifiers are integrated together through a mega-super-classifier to perform the final conclusion using programming based boosting. The mega-super-classifier system using different super-classifiers in a compact form is more reliable than single classifier or even single super-classifier system. The system has been evaluated with accuracy, precision, recall and F-score metrics through holdout method and confusion matrix for each of the single classifiers, super-classifiers and finally the mega-super-classifier. The different performance evaluations are appreciable. Also the learning and the recognition time is fairly reasonable. Thereby making the system is efficient and effective.

• 한국레이저가공학회지
• /
• 제15권4호
• /
• pp.12-15
• /
• 2012

On behalf of the existing semiconductor process, the electronic devices to low-cost mass production to mass print the way, the research for development of roll-to-roll printing process is actively underway. This study was performed in about the research on the manufacturing technology of the printing roll used in the printing process of electronic devices. The indirect laser imprinting technology was used to create printable roll, and after coating copper on the surface of steel and thereon after coating polymer, after removing the polymer on the surface of roll, the printable roll was made. The laser system and roll feeder system were constructed and control program was developed. We has found the optimal conditions to perform laser patterning experiments using a system developed and We can make the minimum line width of 18 ${\mu}m$.

• 식품과학과 산업
• /
• 제53권4호
• /
• pp.435-443
• /
• 2020

Korea has entered into an aged-society in 2018. If this trend continues to increase, it is expected that a super-aging society will take place by 2026. Therefore, Korea is placed in the situation of becoming the world's fastest aging nation as it becomes a super-aging society from an aged-society in twenty-six years. In order to provide an effective supply of nutrition for the socially weak, Japan developed a variety of foods with food texture improvements. Germany improved accessibility for meal service development. Senior-friendly food is a softened food or a highly concentrated drink, which is considered a texture-modified food, for the elderly with eating disorders to digest food more easily by making food particles smaller. Varying food processing techniques such as freeze-thawing enzyme impregnation, high-pressure processing, super-heated steam processing, 3D food print, and others used to produce texture-modified foods.