• 상하수도학회지
• /
• 제25권5호
• /
• pp.783-790
• /
• 2011

The purpose of this study was to suggest the alternative measures to properly manage the water quality of Lake Euiam, Chuncheon. Current pollution level of Gongji stream (influent to Lake Euiam) and sources of contamination in Lake Euiam were investigated. Particle size, organic matter and nutrient contents, heavy metals were analyzed for sediment samples taken from lower region of Gongji stream. Average organic matter content of nine sediment samples was 5.7%, and for nitrogen and phosphorus it was 750 mg/kg and 977mg/kg, respectively. Heavy metals including aluminum, iron, manganese and zinc were measured, whereas Cd and As were not detected. Effluent from Chuncheon Wastewater Treatment Plant appeared to be one of the main cause of organic matter and nutrients level in Lake Euiam. Inhibition of primary production and consequent reduction of organic matter content within the Lake should be a key measure to protect the water quality of Lake Euiam. Preventive measures to reduce the level of nutrients in wastewater treatment effluent were found necessary.

• 한국지반공학회논문집
• /
• 제24권5호
• /
• pp.107-115
• /
• 2008

본 연구는 1차압밀 중의 크리프의 영향과 Yin이 제안한 탄-점-소성 모델에 대한 적용성을 검토하였다. 탄성모델을 이용한 일반적인 압밀이론은, 1차압밀 과정을 표현할 수 있으나 2차압밀을 표현할 수 없다. 이러한 결과는 2차압축을 표현할 수 있는 점성에 기인하며, 때로는 Ladd 등(1977)이 제안한 가정 A 및 B와 같은 스케일효과(실험실 공시체와 현장조건 사이의 점토층 두께의 차이)와 관련되어진다. 통상적으로 1차압밀 중의 크리프의 존재는 많은 연구자에 의해 확인되어졌으며, 가정 B가 잘 맞는 것으로 되어있다. 한편, 대형압밀시험을 통해 가정 A와 B의 중간적인 특성이 Aboshi(1973)에 의한 가정 C로써 제안되어졌다. 본 연구에서는 1차압밀 중의 침하-시간관계에 대한 크리프의 영향을 명백히 하기 위해, peat와 점토에 대해 분할형 압밀시험기를 이용하여 가정 B의 압밀시험을 행하였다. 그리고 Yin의 탄-점-소성 모델을 이용하여 실험결과를 해석하였다. 얻어진 결과는 다음과 같다. 1차압밀 종료시에 분할 공시체의 압축은 과잉간극수압 소산속도의 차이에 의해 동일하지 않았다. 또한 분할형 압밀시험기에 의해 측정된 평균변형률과 Yin의 EVP 모델을 이용한 해석치는 잘 일치하였다. 그러나 과잉간극수압의 소산에 대해서는 측정치가 Yin 모델에 비해 빨리 소산되었다.

• Tribology and Lubricants
• /
• 제22권3호
• /
• pp.119-126
• /
• 2006

In this paper, the contact behavior characteristics of a primary sealing components such as a seal ring and a seal seat has been presented for a small hydro-power turbine. Using the non-linear FEM analysis, the maximum temperature, the axial displacement, radial differences between a seal ring and a seal seat, and maximum contact normal stress have been analyzed for three optimized sealing profiles in which are designed based on the FEM analysis and Taguchi's experimental method. The three primary sealing profiles between a seal ring and a seal seat are strongly related to a leakage of a water for a hydro-power turbine and wear of a primary sealing component. The computed results show that the contact rubbing area between a seal ring and a seal seat is very important for reducing a friction heating and wear in a sealing gap, and increasing a contact normal stress in primary sealing components. Based on the FEM computation, models II and III in which have a small rubbing surface of seal rings show low dilatation of primary sealing components, and high normal contact stress between a seal ring and a seal seat. Thus, the FEM computed results recommend a short contacting width of a primary sealing component for reducing a leakage and thermal distortions, and expanding a seal life. This means that a conventional primary sealing component may be switched to a reduced sealing face of seal rings.

• 설비공학논문집
• /
• 제28권6호
• /
• pp.242-247
• /
• 2016

This study analyzed the energy consumption of a building pump system that was originally equipped with a primary-secondary zone pump system. Using the HYSYS program the energy consumption of the primary pump system was compared with the primary-secondary zone pump system. The primary-secondary zone pump system consumes less energy than the originally designed primary pump system. When the distance between the machine room and each building is assumed to be equal, the primary pump system can be more efficient than the primary-secondary zone pump system with decreasing the distance. When the distance is 120 m, the primary system consumes less total annual energy than the primary-secondary zone pump system and saves 2,773 kWh. The suggested energy evaluation program can be useful if the designer seeks a more efficient pump system.

• 환경생물
• /
• 제34권1호
• /
• pp.18-29
• /
• 2016

김 양식을 하고 있는 해역의 물리 화학적인 해양환경 특성, 식물플랑크톤 색소 조성과 농도, 식물플랑크톤 및 방사무늬김의 일차 생산력을 2014년 3월에 김 양식이 이루어지고 있는 만호해역에서 조사를 하였다. 수온은 $9.1{\sim}9.6^{\circ}C$, 염분은 32.5~33.1이었고, 투명도는 높은 탁도로 인하여 유광층이 낮아져 0.7~1.5 m를 보였다. 수층의 용존 무기질소, 용존 무기인 및 규산 규소 각각의 농도는 $3.59{\sim}5.73{\mu}M$, $0.16{\sim}0.41{\mu}M$, $12.41{\sim}13.94{\mu}M$이었다. 클로로필 a 농도는 $0.51{\sim}1.25{\mu}g\;L^{-1}$이었고, $0.7{\sim}20{\mu}m$ 범위의 nanoplankton의 클로로필 a 농도가 58%를 차지하였다. 규조류의 marker 색소인 fucoxanthin의 농도는 $0.51{\sim}1.25{\mu}g\;L^{-1}$로서 전 정점에서 높은 값이었고, $20{\sim}200{\mu}m$ 범위의 fucoxanthin이 64%를 차지하였다. 식물플랑크톤에 의한 일차 생산력은 $57.72{\pm}4.67(51.05{\sim}66.71)mg\;C\;m^{-2}\;d^{-1}$이었고, $0.7{\sim}20{\mu}m$ 범위의 nanoplankton이 76.9%를 차지하였으며, 면적을 고려한 일차 생산력은 $11,337kg\;C\;d^{-1}$이었다. 방사무늬김에 의한 평균 일차 생산력은 $1,926{\pm}192(1,102{\sim}2,597)mg\;C\;m^{-2}d^{-1}$이었고, 면적을 고려한 일차 생산력은 $39,295kg\;C\;d^{-1}$이었다. 식물플랑크톤과 방사무늬김에 의한 일차 생산력을 토대로 계산된 만호해역의 일차 생산력은 $50,632kg\;C\;d^{-1}$로 나타났다. 만호해역의 식물플랑크톤에 의한 일차 생산력이 다른 해역보다 낮고, 김의 일차 생산력이 식물플랑크톤의 일차 생산력보다 약 3.5배 높았다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.283.1-283
• /
• 2001

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 추계학술발표회요약집
• /
• pp.246-246
• /
• 1998

• Clinical and Experimental Pediatrics
• /
• 제49권5호
• /
• pp.463-469
• /
• 2006

Sodium is the major cation of the extracellular fluid and the primary determinant of extracellular osmolality. Therefore, hypernatremia causes water movement out of cells, while hyponatremia causes water movement into cells, resulting in cellular shrinkage and cellular swelling, respectively. Serious central nervous system symptoms may complicate both conditions. Since hypernatremia and hyponatremia are accompanied by abnormalities in water balance, it is essential to understand the mechanisms regulating extracellular osmolality and volume as well as the pathophysiology of hypernatremia and hyponatremia, in order to manage both conditions with swiftness and safety.

• Ocean and Polar Research
• /
• 제29권4호
• /
• pp.349-366
• /
• 2007

Seasonal variations of various physicochemical components (temperature, salinity, pH, DO, COD, DOC, nutrients-silicate, DIN, DIP) and potential limiting factor for phytoplankton primary production were studied in the surface water of semi-enclosed Masan Bay. Seasonal variations of nutrient concentrations, with lower values in summer and winter, and higher in fall, are probably controlled by freshwater loadings to the bay, benthic flux and magnitude of occurrence of phytoplankton communities. Their spatial distributional patterns are primarily dependent on physical mixing process between freshwater and coastal seawater, which result in a decreasing spatial gradient from inner to outer part of the bay. In the fall season of strong wave action, the major part of nutrient inputs (silicate, ammonium, dissolved inorganic phosphorus) comes from regeneration (benthic flux) at sediment-water interface. During the summer period, high Si:DIN and Si:DIP and low DIN:DIP relative to Redfield ratios suggest a N- and secondarily P-deficiency. During other seasons, however, silicate is the potential limiting factor for primary production, although the Si-deficiency is less pronounced in the outer region of the bay. Indeed, phytoplankton communities in Masan Bay are largely affected by the seasonal variability of limiting nutrients. On the other hand, the severe depletion of DIN (relatively higher silicate level) during summer with high freshwater discharge probably can be explained by N-uptake of temporary nanoflagellate blooms, which responds rapidly to pulsed nutrient loading events. In Masan Bay, this rapid nutrient consumption is considerably important as it can modify the phytoplankton community structures.

• 유기물자원화
• /
• 제22권3호
• /
• pp.53-59
• /
• 2014

본 연구에서는 A 지역의 하수슬러지 건조장치가 설치되기 전과 후 탈수슬러지의 조성 및 성상, 중금속함유량 등을 측정 및 조사 분석을 하였다. 분석결과 건조로 설치전보다 약 95.7%의 제거효율을 보였으며, 설계값으로 1차건조로 35%, 2차건조로 10% 함수율을 제거하지만, 측정해본결과 1차건조로 20.8%, 리본 3.3%로 실제 운전효과가 더 좋은 것으로 나타났다. 중금속 함유량은 건조장치 설치 전 Cu : 352~614ppm, Hg : 1.3~1.44ppm, Cd : 1.1~1.86ppm, Pb : 17.25~ 28.93 ppm, As : 1ppm 이고 설치 후 Cu : 340~350 ppm, Hg : 0 ppm, Cd : 0~0.021 ppm, Pb : 0 ppm, As : 0~0.043 ppm으로 건조장치설치 전과 후 모두 법정 기준치에 초과하지 않음을 확인하였다. 또한 건조장치를 통과한 하수슬러지는 평균적으로 ${\frac{1}{4}}$의 건조슬러지가 발생하였다.