• Proceedings of the Korean Society of Crop Science Conference
• /
• 1999.11a
• /
• pp.102-144
• /
• 1999

The major problems of food crop cultivation in Korea are low yield of most crops except rice. inefficient cultivation techniques for aged farmers. and low international competibility. Therefore, development of cultivation techniques of food crops should aim the yield. quality improvement, labor reduction and production cost. The primary issue for increasing the yield of soybean, barely and wheat is to reduce the yield gap between the farmer's yield and recommended ones of experiment station. More advanced cultivation techniques needs to be developed. and/or the conventional breeding methods to be reconsidered. The newly developed labor-saving mechanized technique needs to reduce labor hours , and the cost of agricultural implements and machineries. In other words the labor-saving mechanized technique should be developed based on the improvement of total farming system as well as systemic fundamental innovation of cultural methods. The efficiency of solar energy use in food production of Korea in 1997 is as low as $0.52{\%}$ so there is much room to increase yield. It is recommendable that the concept of food Production should be changed to energy Producing efficiency Per unit area basis from volume and weight of food materials. Moreover, introduction of resonable cropping system is needed to increase yield of main crops, farmer's income, solar energy use efficiency, and decrease of land service expenditure. Current cropping system emphasized on economic crops. especially in vegetables , is not desirable for resonable use of arable land. stability of agricultural management and staple food crop self-sufficiency ratio. It is desirable to increase food crops . that are energy of carbohydrate and protein rich and land dependent crops. in cropping system. And the agronomist should develop the cultural methods to replace food crops for food self-sufficiency and stable farming management instead of economic crops in current cropping system. Low-input and environmentally-sound crop cultivation techniques, especially nitrogen-reducing culture technique which is directly related to food crop quality, also needs to be developed urgently. The extended cultivation of corn in upland and barely and wheat in lowland as a feed stuffs is recommended to prevent further decrease of food self-sufficiency ratio, which is mainly caused by the high reliance on imported feed grain. It is also considered that the calculation and presentation methods of standard agricultural income needs to be improved. The current calculation method uses unit land area of 10a regardless of crop kinds , characteristics of agricultural management and cultivation scale. So, it is apt to lead misunderstanding of farm income value. Therefore. it should show an income of average farmers for certain number of years. Research and developing system for food producing is not desirable because they are conducted currently individual crop and mono-culture basis. But actual agricultural income is usually earned by cropping system including upland and lowland. For example. the barley and wheat is usually cultivated in double cropping system. The cooperation among research institutes such as university agribusiness. government and farmers is indispensible. The public information and education on importance and consumption habit of food crops is necessary in Korean society to increase food self-sufficiency through nationwide cooperation.

• Food Science of Animal Resources
• /
• v.37 no.1
• /
• pp.87-97
• /
• 2017

This study aimed at optimizing the manufacturing conditions of a milk beverage supplemented with coffee, and monitoring its physicochemical and sensory properties during storage. Raw milk, skim milk powder, coffee extract, and emulsifiers were used to manufacture the beverage. Two sucrose fatty acid esters, F110 and F160, were identified as suitable emulsifiers. The optimum conditions for the beverage manufacture, which can satisfy two conditions at the same time, determined by response surface methodology (RSM), were 5,000 rpm primary homogenization speed and 0.207% sucrose fatty acid emulsifier addition. The particle size and zeta-potential of the beverage under the optimum condition were 190.1 nm and $-25.94{\pm}0.06mV$, respectively. In comparison study between F110 added group (GF110) and F160 added group (GF160) during storage, all samples maintained its pH around 6.6 to 6.7, and there was no significant difference (p<0.05). In addition, GF110 showed significantly higher zeta-potential than GF160 (p<0.05). The particle size of GF110 and GF160 were approximately 190.1 and 223.1 nm, respectively at initial. However, size distribution of the GF160 tended to increase during storage. Moreover, increase of the particle size in GF160 was observed in microphotographs of it during storage. The $L^*$ values gradually decreased within all groups, whereas the $a^*$ and $b^*$ values did not show significant variations (p<0.05). Compared with GF160, bitterness, floating cream, and rancid flavor were more pronounced in the GF110. Based on the result obtained from the present study, it appears that the sucrose fatty acid ester F110 is more suitable emulsifier when it comes to manufacturing this beverage than the F160, and also contributes to extending product shelf-life.

• Journal of the Korean Chemical Society
• /
• v.62 no.5
• /
• pp.358-363
• /
• 2018

The purpose of this study is to show the possibility of using Cu catalyst in removal of $NO_x$ from automobile exhaust which is regarded as the primary source of fine dust PM2.5. The energy and the bond lengths of the three possible structures of Cu-NO complex, which is formed by binding NO molecule to Cu, and the changes in IR and Raman spectra are calculated using MPW1PW91 method on the level of 6-311(+)G(d,p) of basis sets with Gaussian 09 program. As a result, the enthalpy of formation of the Cu-NO complexes are obtained as ${\Delta}H=104.89$, 91.98, -127.48 kJ/mol for the linear, bent, and bridging forms of them, respectively. And the bond lengths between N and O in NO complexes, which becomes longer than NO molecule, indicates that O is easily reduced from Cu-NO. In addition, the Cu-NO complexes using Cu catalyst can be easily measured by infrared or Raman spectroscopy because in the IR and Raman spectra of the NO and Cu-NO complexes the positon and the intensity of bands are definitely different in each vibration mode.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.215-220
• /
• 2007

The control of the surface energy by electrohydrodynamic force provides electrospraying with various potential advantages such as simple particle size control, mono-dispersity, high recovery, and mild processing conditions. The advantages are quite helpful to improve the stability of protein drug and control its release. Herein, the nano-encapsulation of protein drugs using electrospraying was investigated. Albumin as a model protein was processed using uniaxial and co-axial electrospraying, and chitosan, polycaporlactone (PCL), and poly (ethylene glycol) (PEG) were used as encapsulation materials. The major processing parameters such as the conductivity of spraying liquids, flow rate, the distance of electrical potential gradient, etc were measured to obtain the maximum efficiency. In the chitosan systems, mean particles size decreases as flow rate and the distance between nozzle and the collecting part decreases. In the uniaxial technique of the PCL systems, mean particles size decreases as flow rate decreases. In the coaxial technique of the PCL systems, it was found that the particles size gets larger under the application of the higher ratio of inner-to-outer liquid flow rates. The primary particles formed out of an electrospraying nozzle showed narrow particle size distribution, but once they arrived to the collecting part, aggregation behavior was observed obviously. Efficient nano-encapsulation of albumin with PCL, PEG, and chitosan was conveniently achieved using electrospraying at above 12 kV.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.31-41
• /
• 2006

The primary purpose of a TKA is to restore normal knee function Therefore, ideally, a TKA should: (a) maintain the natural leverage of the knee joint muscles to ensure generating adequate knee muscle moments to accomplish daily tasks such as rising from climbing stairs; (b) provide adequate knee joint stability. A 16-channel MyoResearch XP EMG system was used to collect the differential input surface electromyography signals VM, VL, RF, BF, ST during climbing/descending stair tests. A Peak Motion Measurement System was used to collect the kinematic and kinetic data. AKIN-COM Ill isokinetic dynamometer was used for EMG of VM, VL, RF, BF and ST during maximal voluntary contraction. I Quadriceps EMG results for the VM of the passed 1year group limb demonstrated significant less RMS EMG than that of the passed 3year group limb $60^{\circ}-15^{\circ}$ of knee flexion(p<0.05). The VL of the passed 1year group limb also demonstrated significants less RMS EMG than that of the passed 3year group limb from $60^{\circ}-45^{\circ}$ of knee flexion(p<0.05). Similar to the VM and VL, the RF of the passed 1year group limb showed less RMS EMG than that of the passed 3year group limb from $60^{\circ}-30^{\circ}$ do knee flexion(p<0.05). Hamstring EMG results for the BF of the passed 1year group limb demonstrated less RMS EMG than that of the passed 3year group limb from $75^{\circ}-15^{\circ}$ of knee flexion(p<0.05). The passed 1year group limb tended to have less ADD displacement(p<0.071) than that of the passed 3year group limb. There was no significant difference of the ABD displacement between the passed 1year group and the passed 3year group limbs(p<0.73). The passed 3year group used compensatory adaptation movement strategies to compensate for the strength deficit of passed 3year group limbs. The passed 3year group limb also increased the quadriceps muscle activation level to produce more knee extension moment to compensate for the short quadriceps moment arm. The passe 3year group limb might have an unstable knee joint in the medio-Iateral direction during the climbing/descending by showing a tendency of more ADD displacement and greater hamming co-activation EMG than the passed 1year group limbs. The TKA design was not able to help the knee joint to produce adequate knee extension moment with less quadriceps muscle effort. I think that old man needs continuous exercise for muscle strength.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.3
• /
• pp.123-129
• /
• 2018

Ink-jet printing technology with ceramic ink of the four digital primary colors (cyan, magenta, yellow, and black; CMYK) can provide stable coloration even in the high-temperature firing process. Ceramic ink-jet printing can be widely applied in construction and ceramic industries due to the advantages of accurate and fast printing process of digital images for various products. Generally, organic solvent with proper viscosity and surface tension has been used in digital ink-jet printing process. However, the needs of ceramic ink without VOCs emission is increasing. In the present study, eco-friendly ceramic ink was synthesized by combining alumino boro-silicate glass frit and $CoAl_2O_4$ inorganic pigment based on an aqueous solvent that does not generate VOCs. The rheological properties and dispersion stability of aqueous ceramic ink were optimized. Jetting behavior and printing characteristics of the ceramic ink were also investigated in detail. As a result, the formulated aqueous ceramic complex ink showed a suitable jetting behavior without satellite drop by adjusting viscosity and surface tension. The ceramic ink can be printed on glass substrate with minimized spreading phenomena duo to high contact angle.

• Journal of Hydrogen and New Energy
• /
• v.23 no.3
• /
• pp.213-218
• /
• 2012

Steam reforming of methane (SRM) is the primary method to produce hydrogen. Commercial Ni-based catalysts have been optimized for SRM with excess steam ($H_2O/CH_4$ > 2.5) at high temperatures (> $700^{\circ}C$). However, commercial catalysts are not suitable under severe conditions such as stoichiometric steam over methane ratio ($H_2O/CH_4$ = 1.0) and low temperature ($600^{\circ}C$). In this study, 15wt.% Ni catalysts supported on $Ce_{0.8}Zr_{0.2}O_2$ were prepared at various calcination temperatures for SRM at a very high gas hourly space velocity (GHSV) of $621,704h^{-1}$. The calcination temperature was systematically varied to optimize 15wt.% $Ni-Ce_{0.8}Zr_{0.2}O_2$ catalyst at a $H_2O/CH_4$ ratio of 1.0 and at $600^{\circ}C$. 15wt.% $Ni-Ce_{0.8}Zr_{0.2}O_2$ catalyst calcined at $500^{\circ}C$ exhibited the highest $CH_4$ conversion as well as stability with time on stream. Also, 15wt.% $Ni-Ce_{0.8}Zr_{0.2}O_2$ catalyst calcined at $500^{\circ}C$ showed the highest $H_2$ yield (58%) and CO yield (21%) among the catalysts. This is due to complex NiO species, which have relatively strong metal to support interaction (SMSI).

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.1
• /
• pp.37-64
• /
• 2007

The purpose of this study is verifying which financial property of a venture company listed in KOSDAQ is a primary factor to determine Highly Successful company or Less Successful one. For sampling, I classified 405 venture companies, whose averages for 2005 of 2 standards are In the 30% high/low rank, as Highly Successful/Less Successful companies subject to the higher Operating Income to Total Assets and Return on Invested Capital (ROIC), the Highly Successful company. And I verified which variable is most important one to distinguish between Highly Successful companies and Less Successful ones among 24 financial ratios selected through preceding studies. For the analysis, I firstly extracted analogous variables by Stepwise Method and secondly carried out Multi variate Discriminant Analysis. The result mainly shows variables related to returns and stability similar to preceding studies. Especially, Operating Income to Total Assets reveals most reliable variable distinguishing between Highly Successful company and Less Successful one, whereas Current Ratio does not. When reliability of function formula of variables were compared with Operating Income to Total Assets standard and ROIC standard, there was almost no difference.

• The Journal of Fisheries Business Administration
• /
• v.36 no.3 s.69
• /
• pp.119-139
• /
• 2005

The purpose of this paper is to provide information that will help both fishing industry and fisheries authority understand the principals of individual transferable quota(ITQ) fishery management. Theoretical frameworks and primary features of ITQ fishery managemenet are the assignment of exclusive property rights for harvest of common - property fisheries resources. An ITQ fishery management is fundamentally different from the conventional fishery management and it gives an individual fisherman the right to catch a specified quantity of fish, his quota. With ITQ, fisherman's quotas are transferable, in whole or in part. An ITQ is a property with certain rights of use, namely, the right to catch a given quantity and species of fish in a specific location during a specific period of time. The right is exclusive in the sense that no one else has the right to use the quota without the owner's permission. The property may be assigned, traded, and exchanged; i.e., the owner has the right to transfer an ownership to others. An ITQ fishery management leads to both economic efficiency and resource conservation. Motivations to overexploit stocks and to overcapitalize should be lessened because fishermen no longer have to compete for limited resources. There are significant positive net benefits and advantages with ITQ fishery management than without. The potential benefits and advantages of ITQ fishery management include increased profits, economic stability, improved product quality, safer working conditions, less gear conflict, elimination of the race - to - fish phenomenon, less by - catch, less gear loss, improved investment climate, mitigation of market gluts, waste reduction, addition to fisherman's wealth, and compensation for fisherman exiting the fishery. As an independent observe to Red Crab Trap Fishery some of the benefits, problems, and effects, an ITQ fishery management in Red Crab Trap Fishery is still far from to be implemented. Many different and difficult aspects (biological, socioeconomics, administrative) are involved considering the implementation of ITQ fishery management in Red Crab Trap Fishery. Among other fishery management tools, the implementation of ITQ fishery management in Red Crab Trap Fishery is considered to be the best in achieving the better conservation of fisheries resources and their more economic and rational exploitation. Korean fisheries authority should pay great attention to the experience of the economic effects of the ITQ fishery management in Red Crab Trap Fishery in the hope of being able to implement at least some of those experiences into the Korean fishery management.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.927-935
• /
• 2019

Screw-failure accidents in small ships frequently occur in coastal waters. In particular, vessels' propulsion systems are frequently coiled due to objects such as fish-nets and ropes that float on the sea. The failure of the ship's propulsion system can cause primary accidents such as ship operation delays and drifting due to loss of power; furthermore, the possibility of secondary accidents such as those involving operators in the underwater removal of rope stuck in a propeller. Ships that do not have the proper tools to solve these problems must be either lifted onto land to be repaired or divers must dive directly under the ship to solve the problem. Accordingly, some small vessels have been equipped with rope-cutter devices on the propeller shaft to prevent ship propeller system accidents in recent years; however, they are not being applied efficiently due to the cost and time of installation. To solve these problems, this study develops an underwater rope-cutter device and controller for the removal of propeller and shaft foreign material in small vessels. This device has simple structures that use the principle of a saw. Meteor gears and crank pins were used for the straight-line rotation of saw blades of the underwater rope-cutters to allow for long strokes. Furthermore, the underwater rope-cutting machines can be operated by being connected to the ship battery. The user, a non-professional, can ensure convenience and stability by applying reverse current prevention and a speed control circuit so that it can be used more conveniently and safely.