• 기술혁신연구
• /
• 제21권2호
• /
• pp.225-254
• /
• 2013

본 연구는 기술제휴 동기의 주요 이론적 배경인 거래비용이론(TCE)과 자원준거이론(RBV)의 기술제휴 파트너 선정기준, 거버넌스, 성과에 대한 설명력을 분석하였다. 기술제휴의 동기인 TCE와 RBV의 통합 분석 관점에서 기술제휴의 각 단계, 즉 기술 제휴 파트너 선정기준, 거버넌스, 성과에 미치는 영향을 측정하였다. 실증연구 결과, 국내 하이테크(High-Tech) 기업의 기술제휴 파트너 선정 시 TCE 관점과 RBV 관점이 복합적으로 영향을 미치는 것으로 나타났으며, 거버넌스 유형 선택에는 TCE 관점이 보다 설명력이 있는 것으로 나타났다. 기술제휴의 성과에는 TCE 관점과 RBV 관점모두 관계가 있지만 RBV 관점의 설명력이 다소 큰 것으로 나타났다. 기술제휴 각 단계에 영향을 미치는 양 이론의 세부 변수를 제시하고, 영향을 미치는 원인을 분석하여 제시하였다. 본 연구의 결론에서는 연구결과에 대한 요약과 시사점 및 한계점에 대하여 기술하였다.

• 소성∙가공
• /
• 제8권3호
• /
• pp.247-247
• /
• 1999

The segregation (distribution) of nickel and the composition of its constituents influence the low thermal expansion characteristics (Invar effect) in Fe-30 wt.% Ni-12.5 wt.% Co-xC Invar alloy. The change of coefficient of the thermal expansion and magnetic properties were studied as an aspect of carbon addition causing the segregation of Ni in primary austenite of as-cast Fe-30 wt.% Ni-12.5 wt.% Co Invar alloy. The coefficient of thermal expansion of Fe-30 wt.% Ni-12.5 wt.% Co-xC Invar alloy showed its lowest value at 0.08 wt.% carbon, increased with increasing carbon content in the range of 0.08-1.0 wt.%C, kept constant at 1.0-2.0 wt.%C and decreased at carbon higher than 2.0 wt.%. The effective distribution of the coefficient of nickel in as-cast Fe-30 wt.% Ni-12.5 wt.% Co-xC Invar alloy increased with increasing carbon content. The volume fraction of they phase of Fe-30 wt.% Ni-12.5 wt.% Co-xC alloy increased with increasing carbon content. The microstructure of Fe-30 wt.% Ni-12.5 wt.% Co-xC alloy changed with the carbon content was independent of the coefficient of thermal expansion. The Curie temperature changed linearly with the carbon content and was similar to the change of the coefficient of thermal expansion. Moreover, the coefficient of thermal expansion decreased when the ratio of saturation magnetization to Curie temperature ($\sigma_s/T_c$) increased, decreasing the Curie temperature and showed a specific relationship with the magnetic properties of the Fe-30 wt.% Ni-12.5 wt.% Co-xCInvar alloy.

• Journal of Welding and Joining
• /
• 제17권1호
• /
• pp.133-144
• /
• 1999

To fine seam annealer capacity of through thickness seam annealing in terms of through thickness microstructure change with increased toughness and elongation leaving heat trace on it, high strength steel pipes of ERW with different thickness were tested in different seam annealing temperature measured on the outer surface of pipes. Annealing temperature and microstructure of the weld seam were changed through applied seam annealing condition. Toughness and tensile test with hardness and microstructure analysis were done on the annealed weld seam to fine its characteristics as a primary step and annealing characteristics according to different seam annealing condition. Through a study of annealed ERW weld seam characteristics and seam annealing technology, amount of electric power should apply in decreased manner to arranged inductors of annealer in the order of 1st, 2nd, 3rd, so on for proper seam annealing. For example of 15.4mm thick and 610mm outside diameter pipe, applied power for proper seam annealing is 600 -650kw at 1st inductor, 450 - 500kw at 2nd inductor, 200-250 kw at 3rd inductor of annealer during 10 - 12M/minute moving speed of pipe. Also, the penetration depth of heat trace along the thickness direction of weld during seam annealing can be estimated through the equation 17mm/kv$\times$voltage(kv) with the microstructure and hardness analysis of thick weld seam as well as study of seam annealing and comparison of cooling condition to CCT diagram of low carbon high strength steel. From this result, the difference between the technological applicability of full annealing condition based on phase diagram and full penetration of heat trace based on CCT diagram along the thickness of weld seam is discussed.

• 한국자동차공학회논문집
• /
• 제8권1호
• /
• pp.148-156
• /
• 2000

For the in-line three cylinder engine whose crankshaft has a phase of 120 degrees, the total sum of unbalanced inertia forces occurring in each cylinder will be counterbalanced among three cylinders. However, parts of inertia forces generated at the No.1 and No.3 cylinders will cause a primary moment about the No.2 cylinder. In order to eliminate this out-of-balance moment, a single balance shaft has been attached to the cylinder block so that the engine durability and riding comfort may be further improved. Accordingly, the forced vibration analysis of the in-line three cylinder engine must be implemented to meet the required targets at an early design stage. In this paper, a method to reduce noise and vibration in the 800cc, in-line three cylinder LPG engine is suggested using the multibody dynamic simulation. The static and dynamic balances of the in-line three cylinder engine are investigated analytically. The multibody dynamic model of the in-line three cylinder engine is developed where the inertia properties of connecting rod, crankshaft, and balance shaft are extracted from their FE-models. The combustion pressure within the No.1 cylinder in three significant operating conditions(1500rpm-full load, 4000rpm-full load and 7000rpm-no load)is measured from the actual tests to excite the engine. The vibration velocities at three engine mounts with and without balance shaft are evaluated through the forced vibration analysis. Obviously, it is shown that the vibration of the in-line three cylinder engine with balance shaft is reduced to the acceptable level .

• 한국분말재료학회지
• /
• 제24권5호
• /
• pp.406-413
• /
• 2017

A Nanosized $WO_3$ and CuO powder mixture is prepared using novel high-energy ball milling in a bead mill to obtain a W-Cu nanocomposite powder, and the effect of milling time on the structural characteristics of $WO_3-CuO$ powder mixtures is investigated. The results show that the ball-milled $WO_3-CuO$ powder mixture reaches at steady state after 10 h milling, characterized by the uniform and narrow particle size distribution with primary crystalline sizes below 50 nm, a specific surface area of $37m^2/g$, and powder mean particle size ($D_{50}$) of $0.57{\mu}m$. The $WO_3-CuO$ powder mixtures milled for 10 h are heat-treated at different temperatures in $H_2$ atmosphere to produce W-Cu powder. The XRD results shows that both the $WO_3$ and CuO phases can be reduced to W and Cu phases at temperatures over $700^{\circ}C$. The reduced W-Cu nanocomposite powder exhibits excellent sinterability, and the ultrafine W-Cu composite can be obtained by the Cu liquid phase sintering process.

• 자원환경지질
• /
• 제29권3호
• /
• pp.269-279
• /
• 1996

Dehydroxylation and mullitization of primary and secondary kaolins were investigated in order to compare and understand the differences in thermal behaviours by DTA and TG up to $1,100^{\circ}C$. Chemical analyses and EPMA of the samples revealed nearly ideal unit-cell formulae of kaolins. The weight losses of dickite and halloysite are 14% and 12.5% on the average, respectively. The activation energies of dehydroxylation of kaolin minerals were calculated according to Kissinger's approach which uses various heating rates in DTA to estimate the activation energy of thermal reactions. The activation energies of dehydroxylation of halloysites from Daemoung and Buksam mines are about $163kJmor^{-1}$ (white), $168kJmor^{-1}$ (pink), and $176kJmor^{-1}$ respectively. The activation energies of dickites collected from Sungsan and Ogmae mines are about $166kJmor^{-1}$ and $387kJmor^{-1}$. The asymmetric shape of endothermic peak in DTA, the relative intensities of OH-stretching bands in FTIR spectroscopy and the existence of residual XRD peaks of the samples which were heated at $550^{\circ}C$ for 2 hours indicate that Sungsan dickite may be more disordered than Ogmae dickite. The new phase formed in thermally treated samples in the range of $900^{\circ}C$ to $1,100^{\circ}C$ was identified as mullite by XRD on the basis of disappearing of the characteristic peaks of kaolins and increasing of amorphous background upon heat treatment. On further heating, loss of more water from dehydroxylate resulted in the formation of mullite and the characteristic X-ray diffraction patterns of mullite began to appear at about $900{\sim}1,000^{\circ}C$ in kaolins.

• 분석과학
• /
• 제29권5호
• /
• pp.225-233
• /
• 2016

입자 표면에 고분자를 화학적으로 접목하는 것은 수용성 액체 이상 시스템(ATPS)과 같이 분리된 액체 층에서 마이크로/나노입자를 선택적으로 분배시키는데 중요한 구실을 한다. 본 연구에서는 덱스트란, 폴리에틸렌 글리콜, 알부민을 화학적으로 폴리스티렌 자성 마이크로입자 표면에 화학적으로 부착시켰다. 분배 현상을 역전시킬 수 있는 긴 고분자 사슬의 부착은 일차 아민 작용기를 가진 다양한 고분자를 p-톨루엔술폰산(토실)기를 부착시킨 폴리스티렌 자성 마이크로입자와의 S_N2 치환에 의해 간단히 수행될 수 있었다. 이 후 적외선 현미경을 사용하여 마이크로입자의 표면 변화의 유무를 검사하였다. 반응 후 입자들은 세 가지 폴리머 모두 N-H 신축 진동 피크를 보였으며 대부분의 주요 피크들의 위치는 반응 전후에 유사하였으나 지문 영역에서 구별 가능한 차이를 보였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.4-4
• /
• 2012

Proteins enable biology to be viable through molecular interactions (such as in antigen-antibody, ligand-receptor, and drug-target) with

• 한국지반환경공학회 논문집
• /
• 제15권3호
• /
• pp.41-48
• /
• 2014

준설토에 대한 연구는 주로 준설토의 1차원 침강 및 자중압밀 특성을 파악하는 실험적 연구가 진행되었다. 하지만 양질의 준설지반 확보를 위한 효과적인 투기장의 설계와 배출수에 의한 환경오염을 최소화하기 위해서는 준설토의 투기에 의한 유동특성의 체계적인 연구가 필요하다. 본 연구에서는 준설토 투기장의 펌핑에 의한 토사의 유동 형상을 모사하기 위하여 준설토사를 단일상으로 가정하고 연속 방정식을 유도하여 좌표축에 따른 힘 평형 방정식을 유도하였다. 준설토장의 3차원 거동 해석을 위한 컴퓨터 연산 부하와 모델링 소요시간을 최적화하기 위하여, 토체의 깊이 방향으로 적분을 수행하는 깊이 적분 방법을 지배 방정식에 적용하여, 3차원적 지형조건을 고려할 수 있도록 하였다. 지배 방정식의 보간함수를 이용한 공간분할에서 Petrov-Galerkin 수식화 기법을 적용하였다. 일반화된 사다리꼴 법칙으로 시간적분을 수행하고 Newton의 반복과정을 이용할 수 있도록 근사화시켰다. 가중행렬은 DG과 CDG 기법을 적용하였으며, 준설토 유동해석에서 가중행렬에 따른 수치적인 안정성을 평가하기 위하여 사각형 기둥 슬럼프 시뮬레이션을 수행하였다. 수치기법에 대한 비교 분석 결과는 DG 기법을 적용한 SU/PG 수식화가 유사진동을 최소화시키는 가장 안정적인 수치해석결과를 보여주는 것으로 나타났다.

• 한방재활의학과학회지
• /
• 제23권1호
• /
• pp.1-13
• /
• 2013

Objectives : The pathophysiology of acute spinal cord injury(SCI) may be divided into primary and secondary mechanisms of injury. The secondary mechanism involves free radical formation, excitotoxicity, inflammation and apoptotic cell death, and sets in minutes after injury and lasts for weeks or months. During this phase the spinal tissue damages are aggravated. Therefore, secondary mechanisms of injury serve as a target for the development of neuroprotective drug against SCI. The present study investigated the effect of tetramethylpyrazine(TMP), an active ingredient purified from the rhizome of Ligusticum wallichii(川芎, chuanxiong), on neuronal apoptosis in spinal cord compression injury in rats. Methods : SCI was subjected to rats by a static compression method(35 g weight, 5 mins) and TMP was treated 3 times(30 mg/kg, i.p.) during 48 hours after the SCI. Results : TMP ameliorated the tissue damage in peri-lesion of SCI and reduced TUNEL-labeled cells both in gray matter and in white matter significantly. TMP also attenuated Bax-expressed motor neurons in the ventral horn and preserved Bcl-2-expressed motor neurons. Conclusions : These results indicate that TMP plays a protective role in apoptotic cell death of neurons and oligodendrocytes in spinal cord injury. Moreover, it is suggested that TMP and TMP-containing chuanxiong may potentially delay or protect the secondary spinal injury.