• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.3
• /
• pp.339-346
• /
• 2001

The impulsive spin-up flow in a shallow rectangular container is analyzed numerically by quasi 3-D unsteady laminar flow. In the non-inertia coordinates, the flow is generated by the virtual forces as Coriolis force, etc.. After the boundary layers grow up near sidewalls, primary vortexes separate from the sidewalls. As the Reynolds number increases, the subsidiary vortexes take place in the boundary layer. The rigid body rotation is started from the inner region and propagated to the outer region, finally all the fluid reaches the rigid body rotation. According to the Reynolds number and the aspect ratio, the development of vortex pattern is symmetric or asymmetric.

• International Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.1-5
• /
• 2015

The powder propellant rocket which uses micron-sized particles as fuel is storable and costly. Functions like thrust control and multiple-ignition can be realized by changing powder mass flow rate. In this paper, we discuss the theoretical performance of bi-propellant and mono-propellant powder rocket. When used as the fluidization gas, helium can improve specific impulse dramatically. The stability of the powder feeding device is preliminarily quantified through metal/N2O powder rocket hot fire tests.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.675-678
• /
• 2017

In the present, various methods have been employed to obtain the lesser thrust loss. Numerical simulations have been carried out for optimizing the thrust vector control system. Thrust vector control based on coflowing shear layer is an effective method to control the primary jet direction in the absence of moving parts. Thrust vector in symmetric nozzles is acquired by secondary flow injections that result to boundary layer separation. The pressure in secondary flow inlet was varied to check the deflection angle of jet flow.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.12 s.255
• /
• pp.1588-1595
• /
• 2006

The stabilities of a pinned-pinned straight pipe conveying fluid are investigated by complexification-averaging method. The flow is assumed to vary harmonically about a constant mean velocity. Instability conditions of a governing equation are analytically obtained about parametric primary, secondary and combination resonances. The resulted stability conditions show that instabilities exist when the frequency of flow fluctuation is close to one and two times the natural frequency or to the sum of any two natural frequencies. In case that the fluctuated flow frequency is close to the difference of two natural frequencies, instabilities does not exist.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.74-81
• /
• 2016

The aim of this study was to find the initial design value of turbine blade for electrical type turbocompound system generating 10 kW. Turbocompound is one of the waste heat recovery system applying to internal combustion engine to recover exhaust gas energy that was about 30 % of total input energy. To design the turbine blade, 1-D mean line flow model was used. Exhaust gas temperature, pressure, flow rate and turbine rotating speed was fixed as primary boundary conditions. The velocity triangles was defined and used to determine the rotor inlet radius and width, the rotor outlet radius at shroud and radius at hub, the rotor flow angles and the number of blades.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.157-159
• /
• 2008

An numerical investigation of the flow characteristics inside a diffusing S-duct inlet with and without vortex generators(VGs) was conducted. The primary discussion herein focuses on development of secondary flow in the S-duct with and without VGs, pressure recovery and distortion at the exit are also discussed. Full three-dimensional Navier-Stokes equations are solved using finite volume method and $k-\varepsilon$ turbulence model is employed. In order to validate the credibility of the numerical methods, predicted results of surface pressure are compared with flight test for the S-duct inlet without VGs, and it shows fairly good agreement. The result shows that VGs alter the flow characteristics in the S-duct and are effective in reducing distortion and ineffective in improving pressure recovery.

• Journal of Practical Engineering Education
• /
• v.9 no.2
• /
• pp.91-98
• /
• 2017

To produce highly creative students, engineering education must develop both problem recognition skills and the ability to solve problems independently. Chonnam National University has been developing a creativity program in which students identify and solve problems themselves. Initially, the primary focus was on solving problems, but this was unsuccessful at attracting the students' interest. To overcome this, we adopted Csikszentmihalyi's flow theory in our creativity program, much like the way this theory is used in computer games. As a result of adopting flow theory, we achieved our goal. Thus, in this paper, we will introduce Chonnam National University's creativity program (designed based on flow theory), which we will call the Self-Directed Creativity-Upgrade Program. Furthermore, we will discuss the impact of this program based on statistical analyses.

• Journal of the Korean Society of Visualization
• /
• v.21 no.2
• /
• pp.8-13
• /
• 2023

The primary challenge in improving fuel efficiency and reducing air pollution for commercial vehicles is reducing their aerodynamic drag. Various flow control devices, such as cab-roof fairing, gap fairing, cab extender, and side skirt have been introduced to reduce drag, however, the drag reduction effect and applicability are different depending on each commercial vehicle model. To evaluate the fuel consumption of heavy vehicles, a comprehensive research approach, including drag force measurement, flow field analysis is required. This study investigated the effect of a cab extender, which installed rear region of cab, on a drag coefficient of commercial vehicle through wind tunnel experiments and CFD. The results showed that the cab extender significantly modified the flow structure around the vehicle, leading to 8.2% reduction in drag coefficient compared to the original vehicle model. These results would provide practical application for enhancing the aerodynamic performance and fuel efficiency of heavy vehicle.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.83-87
• /
• 1998

To reduce the supersonic jet noise from the liquid rocket engine, water injetion silencers were designed and tested. Test variables were the mass flow rate of water jet, the length of primary pipe and the diameter of expansion pipe. Followings are the results of this study. 1. From the same mass flow rate of water, longer primary pipe was more effective to reduce the noise. 2. Noise level was significantly reduced with increasingly water flow rate. 3. The optimum water flow rate was 10～12 times of the propellant flow rate. 4. By installing expansion pipe, noise level was reduced approximately 30㏈ compared to without expansion pipe

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.51.3-52
• /
• 2018

Since Voyager 1 passed the Heliopause in 2012, it has provided the observations of the charged particles in the local interstellar medium. However, Voyager 1 only provides the information along with its trajectory. In order to understand the global view of the interstellar plasma flow surrounding the Heliopause, we need another tool. When the interstellar plasmas approach the Heliopause, the ions are deflected around the Heliopause due to the draping of the interstellar magnetic field. The draping of the interstellar magnetic field is strongly connected with the shape of the Heliopause. A fraction of the diverted ions exchanges their charges with the undisturbed primary interstellar neutral atoms, and then the ions become neutral atoms called the secondary interstellar neutral atoms. The newly created neutral atoms carry information on the diverted flow of the interstellar ions, and a fraction of them can travel to the Sun. Therefore, the secondary component of the interstellar neutrals is an excellent diagnostic tool to provide important information to constrain the shape of the Heliopause. The secondary interstellar neutrals are observed by Interstellar Boundary Explorer (IBEX) at Earth's orbit. Since 2009, two energetic neutral atom cameras on IBEX have measured neutral atoms and it has provided sky maps of neutral atoms. In this presentation, we will discuss the directional distribution of the secondary interstellar neutrals at Earth's orbit. In the sky maps, the primary interstellar neutral gas is seen between $200^{\circ}$ and $260^{\circ}$ in ecliptic longitude and the secondary components are seen in the longitude range of $160^{\circ}-200^{\circ}$. We also present a simplified model of the outer heliosheath to help interpret the observations of interstellar neutrals by the IBEX-Lo instruments. We extract information on the large-scale shape of the Heliopause by comparing the neutral flux measured at IBEX along four different look directions with simple models of deflected plasma flow around hypothetical obstacles of different aspect ratios to the flow. Our comparisons between the model results and the observations indicate that the Heliopause is very blunt in the vicinity of the Heliospheric nose, especially compared to a Rankine half-body or cometary shape.