• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.907-914
• /
• 2018

In this article, we conducted molecular dynamics simulations to investigate the effect of applied strain and temperature on irradiation-induced damage in alpha-zirconium. Cascade simulations were performed with primary knock-on atom energies ranging between 1 and 20 KeV, hydrostatic and uniaxial strain values ranging from -2% (compression) to 2% (tensile), and temperatures ranging from 100 to 1000 K. Results demonstrated that the number of defects increased when the displacement cascade proceeded under tensile uniaxial hydrostatic strain. In contrast, compressive strain states tended to decrease the defect production rate as compared with the reference no-strain condition. The proportions of vacancy and interstitial clustering increased by approximately 45% and 55% and 25% and 32% for 2% hydrostatic and uniaxial strain systems, respectively, as compared with the unstrained system, whereas both strain fields resulted in a 15-30% decrease in vacancy and interstitial clustering under compressive conditions. Tensile strains, specifically hydrostatic strain, tended to produce larger sized vacancy and interstitial clusters, whereas compressive strain systems did not significantly affect the size of defect clusters as compared with the reference no-strain condition. The influence of the strain system on radiation damage became more significant at lower temperatures because of less annealing than in higher temperature systems.

• Journal of Oral Medicine and Pain
• /
• 제46권2호
• /
• pp.54-62
• /
• 2021

Sjögren's syndrome (SS) is an autoimmune rheumatic disease characterized by the presence of lymphocytic infiltration of exocrine glands and other organs. Due to the rarity of SS, it is frequently overlooked by dentists as a cause of xerostomia. Clinicians should be aware that patients may have oral complications from SS including oral mucosal pain caused by frictional damage. Use of the latest diagnostic criteria approved by the American College of Rheumatology/European League against Rheumatism in 2016 for SS diagnosis provides the advantage of early identification of patients who have not yet developed dry mouth symptoms. A case of primary SS with the chief complaint of oral mucosal pain caused by mucosal damage associated with dry mouth is presented here. This case represents the importance of recognizing oral complications of xerostomia caused by SS, and illustrates use of the latest diagnostic criteria to diagnose the suspected symptoms by dental clinicians, who typically might be the first medical professional to encounter these symptoms.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.86-95
• /
• 2020

This paper describes the work and the results of the final Probabilistic Safety Assessment (PSA) for the Jordan Research and Training Reactor (JRTR). This final PSA was undertaken to assess the level of safety for the design of a research reactor and to evaluate whether it is probabilistically safe to operate and reliable to use. The scope of the PSA described here is a Level 1 PSA, which addresses the risks associated with core damage. After reviewing the documents and its conceptual design, nine typical initiating events were selected regarding internal events during the normal operation of the reactor. AIMS-PSA (Version 1.2c) was used for the accident quantification, and FTREX was used as the quantification engine. 1.0E-15/yr of the cutoff value was used to deliminate the non-effective Minimal Cut Sets (MCSs) when quantifying the JRTR PSA model. As a result, the final result indicates a point estimate of 2.02E-07/yr for the overall Core Damage Frequency (CDF) attributable to internal initiating events in the core damage state for the JRTR. A Loss of Primary Cooling System Flow (LOPCS) is the dominant contributor to the total CDF by a single initiating event (9.96E-08/yr), and provides 49.4% of the CDF. General Transients (GTRNs) are the second largest contributor, and provide 32.9% (6.65E-08/yr) of the CDF.

• 디지털산업정보학회논문지
• /
• 제11권4호
• /
• pp.81-87
• /
• 2015

Recently, with the development of the ICT environment, the use of the software is growing rapidly. And the number of the web server software used with a variety of users is also growing. However, There are also various damage cases increased due to a software security vulnerability as software usage is increasing. Especially web shell hacking which abuses software vulnerabilities accounts for a very high percentage. These web server environment damage can induce primary damage such like homepage modification for malware spreading and secondary damage such like privacy. Source code weaknesses checking system is needed during software development stage and operation stage in real-time to prevent software vulnerabilities. Also the system which can detect and determine web shell from checked code in real time is needed. Therefore, in this paper, we propose the system improving security for web server by detecting web shell attacks which are invisible to existing detection method such as Firewall, IDS/IPS, Web Firewall, Anti-Virus, etc. while satisfying existing secure coding guidelines from development stage to operation stage.

• Earthquakes and Structures
• /
• 제1권2호
• /
• pp.147-162
• /
• 2010

The ground acceleration measured at a point on the earth's surface is composed of several waves that have different phase velocities, arrival times, amplitudes, and frequency contents. For instance, body waves contain primary and secondary waves that have high frequency content and reach the site first. Surface waves are composed of Rayleigh and Love waves that have lower phase velocity, lower frequency content and reach the site next. Some of these waves could be of more damage to the structure depending on their frequency content and associated amplitude. This paper models critical earthquake loads for single-degree-of-freedom (SDOF) inelastic structures considering evolution of the seismic waves in time and frequency. The ground acceleration is represented as combination of seismic waves with different characteristics. Each seismic wave represents the energy of the ground motion in certain frequency band and time interval. The amplitudes and phase angles of these waves are optimized to produce the highest damage in the structure subject to explicit constraints on the energy and the peak ground acceleration and implicit constraints on the frequency content and the arrival time of the seismic waves. The material nonlinearity is modeled using bilinear inelastic law. The study explores also the influence of the properties of the seismic waves on the energy demand and damage state of the structure. Numerical illustrations on modeling critical earthquake excitations for one-storey inelastic frame structures are provided.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2407-2417
• /
• 2021

A structural integrity evaluation program (STEP) was developed for the high temperature reactor design evaluation according to the ASME Boiler and Pressure Vessel Code (ASME B&PV), Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors, Subsection HB. The program computerized HBB-3200 (the design by analysis procedures for primary stress intensities in high temperature services) and Appendix T (HBB-T) (the evaluation procedures for strain, creep and fatigue in high temperature services). For evaluation, the material properties and isochronous curves presented in Section II, Part D and HBB-T were computerized for the candidate materials for high temperature reactors. The program computerized the evaluation procedures and the constants for the weldment. The program can generate stress/temperature time histories of various loads and superimpose them for creep damage evaluation. The program increases the efficiency of high temperature reactor design and eliminates human errors due to hand calculations. Comparisons that verified the evaluation results that used the STEP and the direct calculations that used the Excel confirmed that the STEP can perform complex evaluations in an efficient and reliable way. In particular, fatigue and creep damage assessment results are provided to validate the operating conditions with multiple types of cycles.

• 조명전기설비학회논문지
• /
• 제27권2호
• /
• pp.84-94
• /
• 2013

In case when the existing TRIAC phase controlled dimmer is drove for the LED lighting equipments, there are many problems such as the LED flicker in low phase-angles, the acoustic noise and elements damage by increase of the peak voltage in the input filter capacitor, mulfunction by insufficiency of the TRIAC holding current, and the abnormal oscillation by LC resonant. In this paper, we proposes the single-stage quasi-resonant PSR(Primary Side Regulation) PWM converter, and the design, the simulation and experiment are performed. As a result, it could confirm that the proposed PWM converter is the lighting equipments for LED drive which can alternate the existing 60W class incandescent bulbs and it has the high drive performance of the efficiency 80% and over, the power factor 0.95 and over under the normal voltage 220V. Finally, total harmonic distortion(THD) is gratified with a standard[1] of the lighting equipments and the durability is evaluated as the high reliablilty of 150,000 hours and over.

• Journal of Nutrition and Health
• /
• 제39권8호
• /
• pp.773-785
• /
• 2006

Vitamin E in the body system plays an important role in preventing chronic diseases by decreasing the oxidative stress by free-radicals. However, there are not enough researches on analyzing the primary factors affecting vitamin E levels in the blood in Korean adults. Therefore, the purpose of this research was to examine blood tocopherol levels and the primary factors affecting the status. A complete lifestyle survey was performed on 314 Korean adult men and surveyed their smoking, drinking and exercising habits. The average plasma level of ${\alpha}-\;and\;{\gamma}-tocopherol$ showed similar mutual relations with plasma total cholesterol (TC), triglyceride (TG), or low density lipoprotein cholesterol (LDL-C) levels (p<0.001). Plasma ${\alpha}-tocopherol$ level of the subjects did not show any difference as smoking, drinking and exercising habits changed. However, ${\gamma}-tocopherol$ per TG showed much lower figure in smokers than non smokers (p < 0.05). Amongst diet factors, plasma ${\alpha}-tocopherol$ level showed negative correlations with Vitamin E intake, while ${\gamma}-tocopherol$ level showed positive correlations with Vitamin E intake. Erythrocyte superoxide dismutase (SOD) activity and plasma tocopherol showed negative correlations, and catalase activity and plasma ${\alpha}-tocopherol$ showed positive correlationship. The level of cell DNA damage of Iymphocyte and plasma ${\alpha}-\;or\;{\gamma}-tocopherol$ showed negative correlations. As a result of this research, the factors that affect Korean adult men's plasma ${\alpha}-tocopherol$ level are plasma TG, LDL-C and cell DNA damage in Iymphocyte, while the factors that affect ${\gamma}-tocopherol$ level are plasma TG, LDL-C and vitamin E intake based on multiple regression analysis. These findings implies that the level of different types of tocopherol depends on slightly different factors. A further research is needed on the factors involved in the differentiation of the types of tocopherol.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.86-91
• /
• 2010

The purpose of this study is to analyze the damage patterns and metal structure of 3 phase mold transformers collected from places where accidents have occurred. Compared to an oil-immersed transformer, a mold transformer has the advantage of requiring a smaller installation area and can be kept clean, while its disadvantages include the fact that abnormal symptoms of an accident are difficult to discover and its repair is impossible. The capacity of the mold transformers collected from places where accidents have occurred was 200kVA with primary voltages being F23,900V, R22,900V, 21,900V, 20,900V, 19,900V, etc., as well as secondary voltages being 380V, 220V, etc. It was found from the analysis on the diffusion of combustion in the damaged mold transformers that fire occurred first inside the U-phase primary winding and that carbonization and heat were diffused to V-phase and W-phase in V-pattern. In addition, from the analysis on the cross-sectional structure of the metal of the melted high voltage winding using a metallurgical microscope, it was found that the boundary surface, voids, and columnar structure were formed when an interlayer short-circuit had occurred Therefore, even though it is not possible to find the cause for the occurrence of an interlayer short-circuit at the inner side of the primary winding, it is thought that, due to the thermal energy generated when the short-circuit occurred, the heat source was diffused to the upper side and outside, causing a secondary accident.

• 한국환경과학회지
• /
• 제19권1호
• /
• pp.69-80
• /
• 2010

Today's fundamental purpose of environmental education is to fulfill people's desire of living in a pleasant environment and at the same time promoting individualistic and collective environmentally friendly behaviors. In order to achieve these purposes, it is very important that each person holds an environmentally friendly mind that constantly tries to preserve and protect the environment which should be acquired through experiencing the importance of the environment. In order to increases the sense of attachment of people and the natural environment, the direction of environmental education should carry out education on environment related knowledge and the condition of environment damage side by side. The direction of environmental education should consider the cultivating student's awareness for active participation on matters related to the environment and to change their behaviors towards the environment. This study has tested the effect of reflective writing activities about the environment on the environmental sensitivity and willingness to act of 5th grade primary school students. For the sole purpose of this study, 70 students out of 141 5th graders of M Primary School were divided as the experimental group, and another 71 students were divided as the control group. The experimental group participated in 10 activities in where they were asked to express their thoughts and feelings in writing regarding 10 environmental problems occurring near the M Primary School. The control group participated in 10 environmental education lectures focusing on the lecturer. The results were as following. First, the reflective writing activities about the environment were effective in the environmental sensitivity of primary school students. Second, the reflective writing activities about the environment can affect the environmental willingness to act of primary school students. Third, there was a statistically significant correlation between environmental sensitivity and environmental willingness to act.