• Corrosion Science and Technology
• /
• v.13 no.1
• /
• pp.28-35
• /
• 2014

Recently, the fuel oil of diesel engines of marine ships has been increasingly changed to heavy oil of low quality as the oil price is getting higher and higher. Therefore, the spiral gear attached at the motor of the oil purifier which plays an important role to purify the heavy oil is also easy to expose at severe environmental condition due to the purification of the heavy oil in higher temperature. Thus, the material of the spiral gear requires a better mechanical strength, wear and corrosion resistance. In this study, the heat treatment(tempering) with various holding time at temperature of $500^{\circ}C$ was carried out to the alloy of Cu-7Al-2.5Si as centrifugal casting, and the properties of both hardness and corrosion resistance with and without heat treatment were investigated with observation of the microstructure and with electrochemical methods, such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram, and a.c. impedance. in natural seawater solution. The ${\alpha}$, ${\beta}^{\prime}$ and ${\gamma}_2$ phases were observed in the material in spite of no heat treatment due to quenching effect of a spin mold. However, their phases, that is, ${\beta}^{\prime}$ and ${\gamma}_2$ phases decreased gradually with increasing the holding time at a constant temperature of $500^{\circ}C$. The hardness more or less decreased with heat treatment, however its corrosion resistance was improved with the heat treatment. Furthermore, the longer holding time, the better corrosion resistance. In addition, when the holding time was 48hrs, its corrosion current density showed the lowest value. The pattern of corroded surface was nearly similar to that of the pitting corrosion, and this morphology was greatly observed in the case of no heat treatment. It is considered that ${\gamma}_2$ phase at the grain boundary was corroded preferentially as an anode. However, the pattern of general corrosion exhibited increasingly due to decreasing the ${\gamma}_2$ phase with heat treatment. Consequently, it is suggested that the corrosion resistance of Cu-7Al-2.5Si alloy can be improved with the heat treatment as a holding time for 48 hrs at $500^{\circ}C$.

• Journal of Korea Port Economic Association
• /
• v.28 no.3
• /
• pp.45-72
• /
• 2012

This work uses data associated with business activity and outcome on the five main SOGO-SHOSYA and considers meaning of its outcome and logistics function in energy business field in recent 10 years. The contents of this work embody three chapters, which are an investigation on advanced research, an analysis of SOGO-SHOSYA business outcome, logistics function in its energy business field, Research method are used by statistical analysis and organizational structure analysis as well as case study. We will search for the reason that the energy business has worked well lately. There are actively securing interests of energy exploitation and longer-term investment to affiliated companies, building supply chain system with internal and external businesses. Especially, we will account for the logistics role of SOGO-SHOSYA that has newly understood the international logistics function in energy business field. SOGO-SHOSYA has coordinated organizationally from upstream to downstream in energy business, is showing its abilities in midstream related features that involve investor, organizer and analyst. SOGO-SHOSYA's building up logistics function will help supply chain in energy business for rising the competitiveness of price and quality, and support cost-reducing in activities of supply chain.

• Journal of Korea Water Resources Association
• /
• v.40 no.11
• /
• pp.861-867
• /
• 2007

This Research analyzes the consumers' willingness to pay(WTP) for residential water on severe drought condition. The 7 large cities and 32 chronicle drought regions have been selected for this research survey. Results show that the consumers of large cities, which are relatively rich, think water quality is more important than quantity, but the consumers of 32 chronicle drought regions expressed just opposite. Dichotomous choice and open-ended questionnaire are mixed for the survey and Tobit model is applied in the analysis. As we expected, the higher the education level, the number of household member, and the income, the higher the WTP. When there is 25% reduction of supply, the WTP is about $2 per month. Contrary to the expectation, WTP is just slightly increased for 50% of water supply reduction. This is because of the resistance of tax as well as the limited actual experiences of water shortage so, they underestimated it. In any cases, actual WTP for actual water shortage is much higher than this result. More effective water supply and distribution schedule must be ready as a national and local level to prepare severe drought in the near future. Consumers are willing to pay higher price than the current level for water security. Water distributional system should be reconsidered and alternative source of water also be prepared.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.295-303
• /
• 2018

In the DBB delivery system, the design stage and the construction stage are separated. Because of this, design changes frequently occur, and problems such as construction cost overrun, schedule delay, and quality deterioration happen as well. Recently, in the construction industry CM at Risk(CM@R) delivery system, which can systematically solve the above-mentioned problems of DBB delivery system, meet various demands of clients, and overcome the limited cost and period. In the CM@R delivery system, the contractor negotiates for a maximum guaranteed price(GMP) with the client at the design stage, and the CM performer carries out the construction within the GMP. However, uncertainties are inherent in the GMP calculation because the calculation is based on unfinished drawings and documents. In this study, a Probabilistic Earlier GMP Calculation Method by combining a probabilistic tool of Monte Carlo simulation with a case based reasoning is proposed so that the uncertainty in GMP calculation is reflected. After the earlier GMP is calculated, a process to calculate the $2^{nd}$ GMP at the time of around 80 % of detailed deign and to negotiate with the client to fix the final GMP is proposed. The Probabilistic Earlier GMP Calculation Method is verified through the case study. In this study, researchers set the range of GMP through the proposed probabilistic GMP calculation and tried to reduce the risk through negotiation between the client and the CM performer. The proposed method and process would contribute to the successful introduction of CM@R in Korea.

• Archives of design research
• /
• v.15 no.2
• /
• pp.213-222
• /
• 2002

A transfer paper, is needed in the third firing, is usually utilized for industrial ceramics in order to produce tablewares or promoting products. Products may have the same form, however; the price might be different by what kinds of design have transferred. We need to fully understand these methods in order to create high value and quality. Remodeling, the so-called second architecture, results from social Needs for renovation of structures and changing functions. Tile satisfying the need for a custom-made design which fits the features of a space. Most importantly, the remodeler must make an individual design ordered for the customer with an emphasis on economy and time efficiency. Tiles currently in the market are mass-produced using an automated system with a high-priced mold. It is difficult to find tiles of distinct design that are made in a small quantity. We need to develop a method for making various kinds of tile designs that would be marketed for the remodeling industry. In this study, after designing a certain wall with the tiffs in the space, 1 will talk about developing a method to make transfer paper to produce individual tiles for the space. 1 hope that the functional and aesthetic effect on remodeling will gain in popularity, and that we will foster a new demand for tiles in harmony with the other materials mentioned in this study.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.9-15
• /
• 2016

Liquefied petroleum gas (LPG) and compressed natural gas (CNG) are often used as fuel for vehicles because they are clean alternative gas fuels. CNG, as a low-carbon fuel, can contribute to the reduction of greenhouse gas emissions. LPG is often used as fuel for taxis because the performance is almost the same as that of gasoline but the price is lower. In the present study, the exhaust gas and the particle number (PN) of particulate matter, which is a recent environmental issue, were compared between LPG and CNG for the same vehicle. A chassis dynamometer was used to conduct the test according to the Federal Test Procedure (FTP)-75 and Worldwide harmonized Light-duty vehicle Test Procedure (WLTC) modes. The PN values of discharged particles having sizes of 5 nm or larger and 23 nm or larger were measured using two condensation particle counters (CPC). The ratio of carbon dioxide was high in the exhaust gas from the LPG vehicle; the ratio of methane was high in the exhaust gas from the CNG vehicle. The PN values of the emitted particles from the two fuels were similar. The PN values of particles having sizes of 23 nm or smaller were high in the high-speed WLTC mode.

• Journal of the Korean association of regional geographers
• /
• v.7 no.2
• /
• pp.17-34
• /
• 2001

This paper is to analyze how firms in a large firm-led industrial city have carried out the restructuring in the face of radical shifts, with focus on the strategy and the restructuring of firms in Ulsan, a typical industrial district in Korea that is specialized in heavy & chemical industry. It has been well known that the local economy has been led by a small number of large firms, including affiliates of chaebol, and its industrial structure has also been characterised as a clear dichotomy between large firms as a customer and small and medium-size firms as a supplier, which can be called not horizontal but vertical relations. It can identify some tendencies, however, that local companies have been rather dynamically changing in response to increasingly turbulent environment since the Asian crisis. Some are radical, but some incremental. These can be summarized in four distinctive but interlinked ways. First, more than half of local companies surveyed have attempted to change their production systems, mainly from the fordist mass production towards the flexible mass production, seeking both economies of scale and scope. Second, local firms have vigorously continued to reorganize the boundary of the production and the organization, by specializing products and focusing on the core competence in order to save costs and cope with radically changing customer demands in a flexible way. Third, there have been various strategies for the organizational innovation such as the introduction of team organization, the boundary blurring between the managerial and production workers and the intra-firm spin-offs, so as to improve managerial efficiency and competence in the use of internal labour market. Finally, they have tried to be more sensitive to the market and customers. These tendencies seem to be increasingly critical to sustain their competitiveness. To do so, they tend to focus increasingly not only on the competing via the product quality rather than through price, but also to seek to diversify the market and customer firms beyond national boundary.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.32-41
• /
• 2015

The Metropolitan Area Green Heat Project (MAGHP), which collects unused heat gathered from power plants, steel works, landfills in western Metropolitan area and distribute it to integrated energy business (IEB) companies, is proposed for the purpose of enhancing energy efficiency and providing low-price heat for IEB companies. Therefore, in order to decide on whether to initiate the MAGHP, the economic feasibility analysis of the project is widely demanded. This paper attempts to consider and measure four economic benefits: heat supply benefit, production cost reduction benefit, greenhouse gas mitigation benefit, and air quality improvement benefit. In addition, the paper tries to conduct the economic feasibility analysis. The project requires three-year investment and thirty-year operation. Three important findings emerge from the analysis. First, its net present value is computed to be 1,269 billion won and more than zero. Second, its benefit/cost ratio is calculated to be 1.72 and bigger than 1.0. Third, its internal rate of return is estimated to be 24.26% and larger than the social rate of return, 5.5%. In conclusion, the MAGHP is socially profitable and should be conducted immediately.

• Journal of Animal Science and Technology
• /
• v.57 no.5
• /
• pp.17.1-17.6
• /
• 2015

The present study investigated the nutritional and economic suitability of cashew reject meal (full fat and defatted) as replacement for groundnut cake (GNC) in the diets of laying chickens. A total of eighty four brown shavers at 25 weeks of age were randomly allotted into seven dietary treatments each containing 6 replicates of 2 birds each. The seven diets prepared included diet 1, a control with GNC at $220gkg^{-1}$ as main protein source in the diet. Diets 2, 3 and 4 consist of gradual replacement of GNC with defatted cashew reject meal (DCRM) at 50%, 75% and 100% on weight for weight basis respectively while diets 5, 6 and 7 consist of gradual inclusion of full fat cashew reject meal (FCRM) to replace 25%, 35% and 50% of GNC protein respectively. Each group was allotted a diet in a completely randomized design in a study that lasted eight weeks during which records of the chemical constituent of the test ingredients, performance characteristics, egg quality traits and economic indicators were measured. Results showed that the crude protein were 22.10 and 35.4% for FCRM and DCRM respectively. Gross energy of DCRM was 5035 kcal/kg compared to GNC, 4752 kcal/kg. Result of aflatoxin $B_1$ revealed moderate level between 10 and $17{\mu}g/Kg$ in DCRM and GNC samples respectively. Birds on control gained 10 g, while those on DCRM and FCRM gained about 35 g and 120 g respectively. Feed intake declined (P < 0.05) with increased level of FCRM. Hen day production was highest in birds fed DCRM, followed by control and lowest value (P < 0.05) was recorded for FCRM. No significant change (P > 0.05) was observed for egg weight and shell thickness. Fat deposition and cholesterol content increased (P > 0.05) with increasing level of FCRM. The cost of feed per kilogram decreased gradually with increased inclusion level of CRM. The prediction equation showed the relative worth of DCRM compared to GNC was 92.3% whereas the actual market price of GNC triples that of DCRM. It was recommended that GNC could be completely replaced by DCRM in layer's diets in regions where this by product is abundant. However, FCRM should be cautiously used in diets of laying chickens.

• The Journal of the Korea Contents Association
• /
• v.8 no.2
• /
• pp.150-163
• /
• 2008

It is said that customers buy not products but brands embedded in their mind, so that they are used as a key tool of strong marketing strategy. The present paper is a study on service brand equity, on which much research has not been conducted. The purpose of the present study is to propose the way to manage service brand equity which is essential to gaining competitive superiority by examining the effect of the factors of marketing communication on it. The researcher presented a research model by inquiring into existing researches on marketing communication and service brand equity and set up a research hypothesis. Internet service was chosen as the subject of the study. The reason for this is that it is the most intangible and there is no difference in price and quality, so that it is actively being marketed. The present positive study verified the relation between the factors of marketing communication such as advertising, public relations, sales promotion, and word-of-mouth advertising and brand recognition, brand image, and brand loyalty. The results of the positive study are as follows. Advertising, sales promotion and word-of-mouth advertising had an effect on brand recognition. Public relations, sales promotion and word-of-mouth advertising had an effect on brand image. Brand image and brand recognition affected brand loyalty.