• 상하수도학회지
• /
• 제12권2호
• /
• pp.115-126
• /
• 1998

In use of anaerobic bioconversion shellfish wastes present special problems, since the chitinous structures in the shell faction degrade very slowly in an anaerobic environment. Enzymatic pretreatment method was evaluated for improving the anaerobic bioconversion potential of blue crab processing wastes. An enzymatic pretreatment using chitinase enhanced the ultimate methane yield and biodergradation rate constant for total crab solid wastes by 15% and 19% respectively, above those of the untreated wastes. When the enzymatic pretreatment applied to the shell fraction alone, it resulted in increase of 34% in the ultimate methane yield and 38% in the reaction rate. The results indicate that anaerobic bioconversion of these wastes is technically feasible and enzymatic pretreatment will improve the efficiency of the process.

• 공업화학
• /
• 제26권4호
• /
• pp.511-514
• /
• 2015

차세대 바이오에탄올로 주목받고 있는 목질계 바이오매스를 이용한 셀룰로오스 에탄올 생산과정은 셀룰로오스를 단당류로 분해하는 전처리과정이 가장 중요한 역할을 한다. 본 연구에서는 산가수분해와 효소당화과정을 이용하여 볏짚, 톱밥, 복사지, 신문지 등과 같은 목질계 바이오매스로부터 셀룰로오스에탄올을 제조하였다. 전처리과정으로 10~30 wt% 황산을 이용한 산가수분해($100^{\circ}C$, 1 h), celluclast ($55^{\circ}C$, pH = 5.0), AMG ($60^{\circ}C$, pH = 4.5), spirizyme ($60^{\circ}C$, pH = 4.2)을 이용한 효소당화과정(30 min), 산가수분해 후 효소당화과정을 비교하였다. 전처리과정의 수율은 hybrid 과정 > 산가수분해 > 효소당화 순으로 셀룰로오스 에탄올로의 전환이 잘 이루어지는 것으로 나타났으며, 최적 발효시간은 2일이었다. 또한 20 wt% 황산을 이용한 산가수분해 후 celluclast를 이용하여 효소당화를 수행할 경우 톱밥 > 볏짚 > 복사지 > 신문지 순으로 셀룰로오스 에탄올 전환특성이 높게 나타났다.

• Environmental Engineering Research
• /
• 제20권3호
• /
• pp.223-229
• /
• 2015

The application of coagulation for feed water pretreatment prior to microfiltration (MF) process has been widely adopted to alleviate fouling due to particles and organic matters in feed water. However, the efficiency of coagulation pretreatment for MF is sensitive to its operation conditions such as pH and coagulant dose. Moreover, the optimum coagulation condition for MF process is different from that for rapid sand filtration in conventional drinking water treatment. In this study, the use of response surface methodology (RSM) was attempted to determine coagulation conditions optimized for pretreatment of MF. The center-united experimental design was used to quantify the effects of coagulant dose and pH on the control of fouling control as well as the removal organic matters. A MF membrane (SDI Samsung, Korea) made of polyvinylidene fluoride (PVDF) was used for the filtration experiments. Poly aluminum chloride (PAC) was used as the coagulant and a series of jar tests were conducted under various conditions. The flux was $90L/m^2-h$ and the fouling rate were calculated in each condition. As a result of this study, an empirical model was derived to explore the optimized conditions for coagulant dose and pH for minimization of the fouling rate. This model also allowed the prediction of the efficiency of the coagulation efficiency. The experimental results were in good agreement with the predictions, suggesting that RSM has potential as a practical method for modeling the coagulation pretreatment for MF.

• KSBB Journal
• /
• 제27권3호
• /
• pp.137-144
• /
• 2012

Among various pretreatment processes for bioethanol production, extrusion pretreatment, one of cheap and simple process was investigated to efficiently produce fermentable sugars from micro alga, Chlorella sp. The biomass was pretreated in a single screw extruder at five different barrel temperatures of 45, 50, 55, 60 and $65^{\circ}C$, respectively with five screw rotation speed of 10, 50, 100, 150 and 200 rpm. The pretreated biomass was reacted with two different hydrolyzing enzymes of cellulase and amyloglucosidase since the biomass contained different types of carbohydrates, compared to cellulose of agricultural by-products such wheat and corn stovers, etc. In general, higher glucose conversion yield was obtained as 13.24 (%, w/w) at $55^{\circ}C$ of barrel temperature and 100 rpm of screw speed conditions. In treating 5 FPU/glucan of cellulase and 150 Unit/mL of amyloglucosidase, ca. 64% of cellulose and 40% of polysaccharides in the micro alga were converted into glucose, which was higher yields than those from other reported data without applying an extrusion process. 84% of the fermentable sugars obtained from the hyrolyzing processes were fermented into ethanol in considering 50% of theoretical maximum fermentation yield of the yeast. These results implied that high speed extrusion could be suitable as a pretreatment process for the production of bioethanol from Chlorella sp.

• 멤브레인
• /
• 제25권4호
• /
• pp.301-309
• /
• 2015

최근 해수담수화 기술에 관한 관심이 증가하면서 해수 전처리 기술의 중요성이 날로 증가하고 있다. 해수담수화 기술은 미래 수처리 핵심기술로 자리매김하고 있고 이를 위한 전처리 기술의 올바른 선택과 운영은 향후 해수담수화 기술의 효율향상과 공정 최적화를 위해 중요하게 고려되어야 할 것이다. 해수담수화 전처리 기술의 목적은 주로 해수에 존재하는 입자성 물질, 콜로이드성 물질, 유기물질, 무기물질 그리고 미생물 오염물질 등의 처리를 통해 후단 담수화 기술의 효율성을 향상시키기 위함이나 전처리 기술 대상 처리물질의 범위는 매우 다양하여 맞춤형 전처리 기술의 적절한 적용이 필요하다. 해수담수화에서 올바른 전처리 기술의 적용은 후단 담수화 시설의 높은 처리효율 및 문제점을 최소화시킴과 동시에 해수의 큰 수질변동과 기후적인 그리고 지역적인 영향 등에 즉각적으로 대처할 수 있으므로 전처리 기술의 운영전략은 미래 해수담수화 기술의 성공여부를 결정짓기 위해 매우 중요하게 다루어져야 한다. 또한 최근에 많은 관심을 가지고 있는 해수 미세조류의 번성은 담수화 전처리 기술의 선정에 있어서 잠재적인 장애가 되고 있어 이에 대한 올바른 이해도 반드시 필요하다. 본 총설에서는 해수담수화 전처리 기술에 관한 그동안의 연구동향을 분석하고 해수담수화 전처리 기술의 선택 및 운전 최적화 달성을 위한 향후 도전과제들을 제시하고자 한다.

• Korean Chemical Engineering Research
• /
• 제54권6호
• /
• pp.806-811
• /
• 2016

오르가노솔브를 이용한 전처리는 목질계 바이오매스의 주요성분을 분별하고 전처리 바이오매스의 효소당화를 효과적으로 유도할 수 있는 공정이다. 이에 사용되는 오르가노솔브는 증류와 재순환공정으로 쉽게 재사용이 가능하고 고형성분에서 리그닌을 화학적으로 분별시킬 수 있다는 장점이 있다. 경제적인 이유로서 낮은 분자량의 알코올(에탄올, 메탄올 등)이 사용되어 왔으며, 무기산(염산, 황산, 인산 등)이 촉매로 첨가되었을 경우 탈리그닌 효과 및 자일로스 성분의 수율을 증대시킬 수 있다. 본 연구에서는 오르가노솔브로는 에탄올을 사용하였고 소량의 황산 촉매를 첨가해 전처리를 수행하였다. 바이오매스는 침출식반응기에서 40~50 wt%의 에탄올을 이용해 20~60분 동안 $170{\sim}180^{\circ}C$에서 전처리가 되었다. 전처리를 마친 바이오매스에 대해서는 전처리 효과를 알아보기 위하여 72시간 동안 효소당화를 수행하였다. 그 결과 $180^{\circ}C$에서 50 wt% 에탄올을 이용한 리기다의 2단 전처리에서 당화율은 40.6%로 나타났지만 같은 조건에서의 1단 전처리에서는 55.4%로 가장 높게 나타나는 것을 보았을 때, 용매와 촉매를 균일하게 섞는 것이 전처리에 효과적이라는 것을 알 수 있었다.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.477-483
• /
• 2007

A coagulation process for RO (reverse osmosis) membrane pretreatment system was an effective technology to remove colloidal and particulate matters. However, coagulant residuals from the pretreatment process may negatively affect RO membrane performance. The bench-scale coagulant exposure study was performed to investigate the effect of their residual on adsorbed mass which related to the membrane performance. Coagulant addition in this study ranged from 0 to 5mg/L ferric chloride, alum, and 2mg/L cationic polymer(poly-di-methyldiallyl ammonium chloride) as coagulant aids. This results showed that adsorbed mass is not significantly increased during short-time period, however, accumulated mass of coagulants on the membrane surface is significantly increased during long-time experimental period. The effect of pH on coagulants adsorption characteristics was significantly differed due to the electrostatic repulsive interactions between soluble coagulants and membrane surface charge. This data suggest that the RO membrane performance of drinking water treatment plant could be decreased by adsorption of residual coagulants when applied for the coagulant pretreatment process.

• 한국식품저장유통학회지
• /
• 제5권3호
• /
• pp.305-314
• /
• 1998

In the drying process, many undesirable physicochemical changes occur that influence dried food product qualities. Pretreatments method is used to reduce the deterioration of dried food product qualities such as color, flavor, texture, rehydration ability and retention of nutrients. The methods of pretreatments are blanching, chemical treatment and osmotic dehydration. Osmotic dehydration is a water removal process which is based on placing foods in a concentrated osmotic solution or in a dry osmotic material. A large number of process variables have a significant effect on process and final product quality. In order to improve final product quality it is necessary to know the role of each process variable and understand the mecanisms throughout the process. Osmotic dehydration is a valuable processing tool with great future in minimal processing of fruits and vegetables.

• 한국물환경학회지
• /
• 제22권6호
• /
• pp.1130-1136
• /
• 2006

This work elucidates the effects of pretreatment of the sewage sludge from wastewater treatment plant by microwave irradiation on elutriated acid fermentation. These experiments typically fell into two process; pretreatment as microwave irradiation and elutriated acid fermentation for hydrolysis and acidification as main process of primary sludge. The results of maximum solubilization rate of B, D primary and secondary sludge were 0.042, 0.086 and 0.15 gSCODprod./gICODin and the optimum irradiation time of microwave on 2,450 MHz and 900 W were 5 min. for primary sludge and 7 min. for secondary sludge. From batch tests on elutriated acid fermentation that was used the pretreated primary sludge as microwave, the optimum pH and HRT (hydraulic retention time) were 7 and 5 days at $35^{\circ}C$ condition.

• 환경위생공학
• /
• 제15권4호
• /
• pp.27-27
• /
• 2000

In order to treat the dyeing wastewater, the UV/TiO₂/H₂O₂ system was investigated, and proper pretreatment methods were examined to reduce the load on the system considering economical and technical efficiency. The results of this study were as follows: 1.UV/TiO₂/H₂O₂ system with pretreatment process was adopted, the result of Chemical coagulation and pH control units was pH 11→ coagulation → pH 4 and the optimum dosage of FeCl₃ was 600㎎/ℓ 2. Proper dosage of TiO₂in the UV/TiO₂/H₂O₂ system with pretreatment process was 2g/ℓ and H₂O₂ was 1000㎎/ℓ, UV contact time was 20min to get below 200㎎/ℓ of $COD_{Cr}$