• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.59-65
• /
• 1996

Cotton fabrics were treated by low temperature plasma and/or cellulase, and its physical and dyeing properties were investigated. All the pretreatments of the cotton with low temperature plasma of oxygen, nitrogen and argon slowed down the rate of weight loss of cotton in cellulase solution. Plasma pretreatment did not show any strength retention effect on cotton fiber in the subsequent cellulase treatment. Pretreatment of cotton with low temperature oxygen plasma decreased the rate of dyeing in direct dye bath, while cellulase or plasma/cellulase pretreatment increased the rate. Equilibrium dye uptake of cotton was not changed greatly by the pretreatments except the normal untreated cotton showed more or less high uptake. The pretreatment of cellulase with a water-soluble carbodiimide reduced the enzymatic activity, and did not show any strength retention of cotton in enzymatic weight loss.

• 한국염색가공학회지
• /
• 제27권1호
• /
• pp.96-104
• /
• 2015

This study examined the pretreatment effect, appropriate dyeing conditions, color fastness and functionality of cotton fabrics dyed with Zizania latifolia Turcz. Dye uptake was substantially increased by pretreatment and chitosan pretreatment was much more effective than tannic acid pretreatment. Optimal dyeing conditions were colorant concentration of 100%, dyeing temperature of $100^{\circ}C$, dyeing time of 80 minutes and dyebath pH of 5.5. Color fastness of chitosan pretreatment and dyed cotton to washing, rubbing, perspiration and light was 4, 5, 3-4(acidic), 3(alkaline) and 3 respectively. Color fastness of tannic acid pretreatment and dyed cotton to washing, rubbing, perspiration and light was 4, 5, 3-4(acidic), 4-5(alkaline) and 4 respectively. Deodorization rates of ammonia(NH3) were 99.9% in both cases. UV protection rate were 98.3% of UV-A and 98.5% of UV-B in case of chitosan pretreatment. UV protection rate were 98.2% of UV-A and 98.5% of UV-B in case of tannic acid pretreatment. UV protection factor(UPF) was 50+ in both cases. Reduction rate of Staphyloccus aureus were 99.9% in both cases. Therefore Zizania latifolia Turcz. could be used a new functional colorant.

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.229-234
• /
• 2005

In this paper, chitosan was suggested for using as a replacement for sodium alginate in the pretreatment print paste for digital ink-jet printing for cotton fabric. Pretreatment print pastes prepared from the mixture of chitosan and acetic acid with the appropriate viscosity gave satisfactory prints on the cotton fabric. Chitosan-treated cotton fabrics were digitally ink-jet printed with four different colors and the color fastness rating of the printed fabrics was satisfactory. Experimental results revealed the possibility of pre-treating the cotton with chitosan to replace the sodium alginate normally present in the pretreatment print paste recipe.

• 한국염색가공학회지
• /
• 제23권1호
• /
• pp.1-10
• /
• 2011

Research information related to application of enzyme as pretreatment and subsequent functional finishing on wool blended textiles for imparting multi-functional properties is still scanty. Yarn-blended wool/cotton fabric was pretreated with both a cellulase (Bactosol-CA) or a protease (Savinase-16.0LEx) in individual, subsequently finished with Synthappret-BAP and ${\beta}$-cyclodextrin based combination to impart anti-shrink, anti-microbial, softening and anti-crease properties. The performance of the finished fabrics depended on type of finishing combinations applied rather than enzyme pretreatment. Savinase pretreatment followed by Synthappret+Ceraperm-MW combination finishing impart both anti-shrink property as well as softening, while Bactosol pretreatment followed by ${\beta}$-cyclodextrin and sanitize combination finishing impart antimicrobial activity as well as anti-shrink finish to the wool/cotton blend fabric.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.117-121
• /
• 2004

Optimum condition concerning the content of pretreatment print paste and steaming time for ink-jet printing was newly developed through the orthogonal analysis. The cotton fabric treated under the newly developed optimum condition could achieve a high level of colour yield similar to that of the commercially pretreated cotton fabric available in the market for ink-jet printing. The results were discussed thoroughly in this paper.

• 펄프종이기술
• /
• 제45권2호
• /
• pp.27-32
• /
• 2013

To improve the physical properties, such as swelling and flexibility, of the cotton fiber, sodium hydroxide or cellulase was used for pretreatment before the beating process. Titanium dioxide was blended during beating process to improve the fibrillation of cotton fibers and even distribution of fillers to cotton fibers. Blending with titanium dioxide during beating process, led to improve the tensile strength and beating degree This treatment also improved the opacity, resulted by well dispersed titanium dioxide during blending. By the blending of titanium dioxide during beating process, similar impact of cotton fiber with cellulase or sodium hydroxide pretreatment was achieved. To improve the tensile strength and opacity of cotton paper simultaneously, titanium dioxide blending in during beating process was found as effective treatment.

• 한국의류학회지
• /
• 제33권12호
• /
• pp.1965-1970
• /
• 2009

본 연구는 면/키토산 혼방섬유에 펙티나제 처리시 계면활성제 전처리에 따른 영향을 알아보기 위해 감량률, 흡수속도, 염색성, 인장강도, 필링성 및 표면형태를 살펴보았다. 계면활성제 전처리 후 펙티나제 처리시 감량률은 약 1.5%였으며, 흡수속도는 계면활성제 전처리에 의해 크게 향상되었다. 인장강도와 필링성 측정결과 계면활성제 전처리에 따른 변화는 나타나지 않았다. 표면관찰 결과, LAS 전처리 후 펙티나제 처리한 면/키토산 혼방섬유의 표면에 계면활성제가 흡착됨을 확인하였다. 이상의 결과를 통해, 면/키토산 혼방섬유의 펙티나제 처리시 계면활성제 전처리는 면/키토산 혼방섬유의 흡수성과 염색성 향상에 효과적임을 확인하였다.

• 대한가정학회지
• /
• 제42권4호
• /
• pp.119-125
• /
• 2004

In this paper, the effect of the volcanic ash dyed on cotton knitted fabrics was studied in various ways. A cationic agent was used to improve the depth of color of the fabric in the dyeing process. K/S values of dyed fabrics were measured to examine the dyeing properties. Cationic agent pretreatment, followed by dyeing with volcanic ash, was tested. In the dyeing experiment, the effects of a wide range of parameters such as the concentration of cationic agent, treatment time, treatment temperature and treatment pH of the dyebath were studied. Experimental results showed that the pretreatment with cationic agent improved the dyeing properties of cotton knitted fabrics with volcanic ash. At this point, concentration of cationic agent was 4%(on weight of fabric), treatment time was 40minutes, treatment temperature was 80 C and treatment pH of the dyebath was a neutral condition.

• 한국의류학회지
• /
• 제37권4호
• /
• pp.590-597
• /
• 2013

This study examined the change in the dyeability of natural dyes on cotton fabrics by a PEI (polyethyleneimine) pretreatment instead of mordants. Cotton fabrics were treated with PEI and the changes in the dyeability were shown by measuring the amount of PEI on cotton fabrics. Samples treated with PEI were dyed with two natural polychromatic dyes with a different affinity to cotton fibers: Alizarin Red S and Curcumin. The changes in dyeability by three variables (time, temperature and concentration of dyes) on cotton fabrics were analyzed by the K/S value to define optimum dyeing conditions. Subsequently, the PEI treatment improved the dyeability of cotton fabrics with both dyes of low and high affinity to cotton fibers. Thus, PEI could be a suitable heavy metal mordant replacement.

• 패션비즈니스
• /
• 제7권4호
• /
• pp.57-66
• /
• 2003

Cochineal dyeing was applied to natural fiber fabrics, cotton and silk fabrics, and synthetic fiber fabrics, nylon and polyester fabrics. Chitosan-pretreatment was applied to the fabrics in order to investigate the effect of chitosan treatment on the dyeing behavior. The effect of chitosan treatment on the mordanting was also investigated by incorporating Cu-mordant on the chitosan-treated or chitosan-untreated fabrics during the dyeing process.