• Nuclear Engineering and Technology
• /
• 제43권2호
• /
• pp.167-174
• /
• 2011

A pressurizer in a small integral type pressurized water reactor is located inside the upper region of the reactor vessel, and uses a space between the upper head of the reactor vessel and the upper region of the upper guide structure which is partially filled with fluid depending on the operating power. This new design requires a comprehensive investigation of vibration characteristics. This study investigates the modal characteristics of a pressurizer which uses a simplified cylindrical shell model, focusing on how having fluid in the shell affects vibration and response characteristics. In addition, an analysis of sloshing is performed and the response characteristics are addressed.

• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1173-1183
• /
• 2018

Transient fluid velocity and pressure fields in a pressurized water reactor (PWR) steam generator (SG) secondary side during the blowdown period of a feedwater line break (FWLB) accident were numerically simulated employing the saturated water flashing model. This model is based on the assumption that compressed water in the SG is saturated at the beginning and decompresses into the two-phase region where saturated vapor forms, creating a mixture of steam bubbles in water by bulk boiling. The numerical calculations were performed for two cases of which the outflow boundary conditions are different from each other; one is specified as the direct blowdown discharge to the atmosphere and the other is specified as the blowdown discharge to an extended calculation domain with atmospheric pressure on its boundary. The present simulation results obtained using the two different outflow boundary conditions were discussed through a comparison with the predictions using a simple non-flashing model neglecting the effects of phase change. In addition, the applicability of each of the non-flashing water discharge and saturated water flashing models for the confirmatory assessments of new SG designs was examined.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1109-1119
• /
• 2016

Although, the direct use of spent pressurized water reactor (PWR) fuel in CANda Deuterium Uranium (CANDU) reactors (DUPIC) cycle is still under investigation, DUPIC cycle is a promising method for uranium utilization improvement, for reduction of high level nuclear waste, and for high degree of proliferation resistance. This paper focuses on the effect of DUPIC cycle on CANDU reactor safety parameters. MCNP6 was used for lattice cell simulation of a typical 3,411 MWth PWR fueled by $UO_2$ enriched to 4.5w/o U-235 to calculate the spent fuel inventories after a burnup of 51.7 MWd/kgU. The code was also used to simulate the lattice cell of CANDU-6 reactor fueled with spent fuel after its fabrication into the standard 37-element fuel bundle. It is assumed a 5-year cooling time between the spent fuel discharges from the PWR to the loading into the CANDU-6. The simulation was carried out to calculate the burnup and the effect of DUPIC fuel on: (1) the power distribution amongst the fuel elements of the bundle; (2) the coolant void reactivity; and (3) the reactor point-kinetics parameters.

• Corrosion Science and Technology
• /
• 제20권4호
• /
• pp.189-195
• /
• 2021

A technology for designing and licensing a dedicated radiation shielding facility needs to be developed for safe and efficient operation an R&D center. Technology development is important for smooth operation of such facilities. Causes of damage to internal structures (such as baffle former bolt (BFB) of pressurized water reactor) of a nuclear power reactor should be analyzed along with prevention and countermeasures for similar cases of other plants. It is important to develop technologies that can comprehensively analyze various characteristics of internal structures of long term operated reactors. In high-temperature, high-pressure operating environment of nuclear power plants, cases of BFB cracks caused by irradiated assisted stress corrosion cracks (IASCC) have been reported overseas. The integrity of a reactor's internal structure has emerged as an important issue. Identifying the cause of the defect is requested by the Korean regulatory agency. It is also important to secure a foundation for testing technology to demonstrate the operating environment for medium-level irradiated testing materials. The demonstration testing facility can be used for research on material utilization of the plant, which might have highest fluence on the internal structure of a reactor globally.

• 분석과학
• /
• 제17권5호
• /
• pp.381-387
• /
• 2004

가압 경수로 사용후핵연료의 화학특성을 규명하기 위하여 극미량 함유되어 있는 삼중수소 ($^3H$)의 정량기술을 확립하였다. 분석과정에서 발생하는 방사성 폐액의 양을 줄이고 분석자의 방사선 피폭을 줄이기 위하여 하나의 시료로부터 $^{14}C$과 $^3H$를 순차적으로 회수할 수 있도록 분리조건을 최적화하였다. 사용후핵연료를 질산으로 용해하는 과정에서 $^{14}CO_2$와 함께 휘발하는 $^{129}I_2$는 $AgNO_3$가 침윤되어 있는 흡착제로 제거하였다. $^{14}CO_2$는 1.5 M NaOH에 포집시키고 $^3H_2O$는 증류시켜 회수하였다. $^3H$의 평균 회수율은 97.9%, 상대표준편차는 0.9% (n = 3) 이었으며, 37,000 MWd/MtU 연소도의 사용후핵연료를 대상으로 $^3H$를 분석하고 표준물첨가법으로 분석신뢰도를 평가하였다.

• 한국전산구조공학회논문집
• /
• 제20권4호
• /
• pp.427-433
• /
• 2007

가압경수로(PWR)에서 배출되는 고준위폐기물을 지하 500m의 화강암 암반의 처분장에 장기간(약 10,000년 동안) 처분하기 위하여 여러 구조적 안전성 평가 수행을 통하여 처분용기모델이 개발되었다. 기존에 설계된 가압경수로용 처분용기 모델은 구조적 안전성은 문제가 없으나 너무 무거운 단점이 지적되었다. 따라서 구조적 안전성을 유지하면서 좀 더 경량화 된 처분용기모델을 개발하는 것이 요구된다. 기존의 처분용기모델이 무거워진 한가지 이유는 처분용기 개발 시 적용된 외력조건 및 안전계수 등에 대한 조건들을 너무 엄격하게 적용했기 때문이라고 사료되기 때문에 이런 조건들을 완화하여 처분용기의 재원들을 조정하여 구조해석을 다시 수행하는 것이 요구된다. 따라서 본 논문에서는 설계 완성된 기존의 처분용기에 대하여 외력 조건 및 용기의 재원(두께 등) 들을 변화시키면서 구조해석을 재 수행하여 구조적 안전성 평가를 보완하였다. 이를 바탕으로 외력 조건에 따른 처분용기의 재원 등을 재 산출한다. 보완 해석 결과 기존의 122cm의 처분용기의 직경을 102cm까지 줄여 경량화 시킬 수 있음이 확인되었다.

• 한국유체기계학회 논문집
• /
• 제10권2호
• /
• pp.41-45
• /
• 2007

The shutoff unit was designed to provide rapid insertion of neutron absorbing material into the reactor core to shutdown the reactor quickly and also to withdraw the absorber slowly to avoid a log-rate trip. Four shutoff units were installed on the HANARO reactor but the half-core test facility was equipped with one shutoff unit. The reactor trip or shutdown is accomplished by four shutoff units by insertion of the shutoff rods. The shutoff rod(SOR) is actuated by a directly linked hydraulic cylinder on the reactor chimney, which is pressurized by a hydraulic pump. The rod is released to drop by gravity, when triplicate solenoid valves are de-energized to vent the cylinder. The hydraulic pump, pipe and air supply system are provided to be similar with the HANARO reactor. The shutoff rod drops for 647mm stroke within 1.13 seconds to shut down the reactor and it is slowly inserted to the full down position, 700mm, with a damping. We have conducted the drop test of the shutoff rod in order to show the performance and the structural integrity of operating system of the shutoff unit. The present paper deals with the 647mm drop time and the withdrawal time according to variation of the pool water temperature, the water level and the core flow.

• 한국재료학회지
• /
• 제10권6호
• /
• pp.445-449
• /
• 2000

가압 경수형 원자로 (pressurized light water reactor) 냉각재 계통 내의 주된 분식 생성물로 알려져 있는 nickel ferrite의 거동에 대해 고찰하기 위해 모의 nickel ferrite($Ni_{0.75}Fe_{2.25}O_4$)를 공침법으로 제조하였다. 수용액-pH-조절로는 am-monia 또는 potassium carbonate를, 공침물-세척제는 ammonia 수용액이나 potassium carbonate 수용액 또는 2차 증류수를 사용하였다. Nickel ferrite의 생성 및 수용액-pH-조절제와 공치물-세척제가 최종 생성물의 Ni-Fe 몰 비에 따른 수율 및 특성에 미치는 영향은 EDX, XPS, XRD 및 SEM으로 고찰하였다. 반응 전.후 Ni/Fe 몰 비에 따른 수율은, pH를 potassium carbon-ate로 조절한 후 2차 증류수로 공침물을 세척한 경우가 0.994로 가장 높이 나왔으며, pH-조절제로 potassium carbonate를 사용한 경우가 ammonia를 사용한 경우에 비해 높은 수율을 나타냈다. 이러한 차이는 공침 시에 수용액 내에서 ammonia가 보여주는 상대적으로 큰 $Na_{2+}{\leftarrow}NH_3$ 착화 효과와 더불어 공침물-세척제의 pH에 기인하는 것으로 해석하였다.

• 청정기술
• /
• 제20권4호
• /
• pp.425-432
• /
• 2014

이 논문은 촉매막반응기(catalytic membrane reactor)에서의 중요한 두 요소인 수소선택도와 수소투과량 및 Ar sweep 유량과 압력이 수성가스전이반응의 성능에 미치는 영향에 대하여 1차원 반응기모델과 반응속도식에 근거한 연구결과를 나타내고 있다. 연소전 이산화탄소 포집의 한 방법으로서, 촉매막반응기를 사용하여 원통부분에서는 고압/고농도의 이산화탄소를 관부분에서는 고순도의 수소를 동시에 얻을 수 있는지에 대한 가능성을 검토하였다. 또한, 고농도의 이산화탄소와 고순도의 수소를 동시에 얻기 위해 필요한 수소투과량, 수소선택도, Ar sweep 유량 및 압력에 대한 지침을 나타내었다. 그 결과 $1{\times}10^{-8}molm^{-2}s^{-1}Pa^{-1}$의 수소투과량과 10000의 수소선택도를 가진 막을 장착한 촉매막반응기에서는 8 atm의 압력과 $6.7{\times}10^{-4}mols^{-1}$의 Ar sweep 유량의 조건하에서 약 90%의 농도를 가진 이산화탄소와 100%의 순도를 가진 수소가 동시에 얻어짐이 밝혀졌다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.444-447
• /
• 2008

A nuclear fuel test loop (after below, FTL) is installed in IR1 of an irradiation hole in HANARO for testing neutron irradiation characteristics and thermo hydraulic characteristics of a fuel loaded in a light water power reactor (PWR) or a heavy water power reactor (CANDU). There is an in-pile section (IPS) and an out-pile section (OPS) in this test loop. When HANARO is normally operated, the fuel loaded in the IPS has a nuclear reaction heat generated by a neutron irradiation. To remove the generated heat and to maintain an operation condition of the test fuel, a main cooling water system (MCWS) is installed in the OPS of the FTL. The pump can not continuously suck a fluid and not pressurize the fluid during a cold function test. To verify the flow characteristics of the MCWS, a flow net work analysis has been conducted. When the higher elevation pipelines wholly filled with coolant, it was confirmed through the analysis results that the pump pressurized the coolant normally. And the analysis results described the system characteristics with operation temperature and pressure variation satisfactorily.