• 항공우주기술
• /
• 제9권2호
• /
• pp.185-192
• /
• 2010

75톤급 터보펌프를 대상으로 한 속도복합형 터빈과 설계회전수를 50% 증가시킨 30톤급 터보펌프 터빈 적용을 위한을 압력복합형 터빈 설계를 수행하였다. 속도복합형 터빈의 경우 1차원설계-유동해석-1차원설계의 반복적인 설계과정을 통해 원형노즐을 적용한 2열 초음속 충동터빈의 특성을 파악하였으며 최종적으로 기본형인 1열 충동형 터빈 대비 비출력 23.1% 향상, 무게 5% 감소된 ver. 14h 모델을 완성하였다. 압력복합형 터빈은 에너지 회수 비율, 2단 노즐 출구각, 2단 노즐 누설유량, 단별 출력 비율 등의 새로운 인자의 고려하여 각 변수의 성능에 미치는 영향을 검토하였으며 1차원 해석 기준 비출력이 36%가 증대되고 무게는 51% 감소한 터빈을 설계하였다. 압력복합형 터빈의 높은 성능을 위해서는 1단 및 2단 노즐의 형상설계가 매우 중요할 것으로 판단되며 유동해석을 통해 최적화할 예정이다.

• 한국기계가공학회지
• /
• 제5권4호
• /
• pp.46-52
• /
• 2006

From the past, most of the studies about thermoplastic elastomers(TPEs) have been conducted for theirs compounded materials and morphology. However these studies do not directly affect on injection molding processing. Therefor this study is focus on the variation of mechanical properties on TPEs moldings by increasing injection molding conditions which included injection molding conditions include injection pressure, holding pressure, melt temperature, mold temperature. The used experimental TPEs is a group of styrene(TPS). Injection pressure slightly affected on tensile strength, shrinkage and hardness. Holding pressure only affected on hardness. The melt temperature was the most affective condition on tensile strength.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권3호
• /
• pp.215-222
• /
• 2003

최근 도심지 지하공간 활용을 위한 굴착공사가 기존의 건물주변에서 대형화, 대심도화 되고 있다. 굴착공사에서 발생되는 토압은 지반조건, 굴착깊이, 시공방법, 벽체 지지구조 등과 같은 여러 가지 요인에 의해 영향을 받으므로 정확히 산정하기가 매우 어렵다. 본 연구에서는 지하철건설현장에 설치된 하중계, 변형율계, 지중경사계와 같은 현장계측기로부터 측정된 계측자료를 선정하여 지반굴착시 흙막이벽체의 최대수평변위와 분포형태 그리고 실측된 Strut 축력으로부터 환산토압을 산정하여 단계별 굴착깊이에 따른 축력거동 양상과 토압분포 형태를 비교 검토하였다. 연구결과 점성토 지반에서의 실측토압은 Tschebotarioff의 경험토압과 Terzaghi-Peck의 경험토압의 합성 형태를 보이고 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.679-682
• /
• 2002

Energy dissipations in a general PHE flow are the compounded effects of the piled corrugate geometries and its wall pressure and temperature distributions. In addition, although the exchangers are substantial pieces of engineering equipment, they are composed of a very large number of nominally identical and small geometrical elements. In the present numerical study, the three-dimensionally complicated energy dissipation fields and those wall-shape-induced flow destabilization are investigated in the cross-corrugated passages, which result in high energy transports with comparatively low pressure drop. We revealed the critical conditions as $Re=157.3 for the wall-shape-induced flow destabilization in a general PHE element by initial value method, or shooting method, and compare its value to that of analytical solution of plane Poiseille flow, two-dimensional grooved flow and so on. We also observed the detailed variation of flow field and energy transportation with changes in time and flow variables such as Reynolds number. Lastly, we considered the flow natural frequency, or Strouhal number, with variation of hydrodynamic conditions for the best use of active control, such as forced mass flow rate pulsative flow, to enhance energy transportation.

• 한국재료학회지
• /
• 제16권6호
• /
• pp.341-345
• /
• 2006

[ $Ni_2Si$ ] mixed powders were mechanically alloyed by a ball mill and then processed by hot isostatic pressing (HIP) and spark plasma sintering (SPS). In the powder that was mechanically alloyed for 15minutes(MA 15 min), only Ni and Si were observed but in the powder that was mechanically alloyed for 30minutes(MA 30 min), $Ni_2Si$, Ni and Si were mixed together. Some of the MA 15 min powder and MA 30 min powder were processed by HIP under pressure of 150MPa at the temperature of $1000^{\circ}C$ for two hours and some of them were processed by SPS under pressure of 60 MPa at the temperature of $1000^{\circ}C$ for 60 seconds. Both methods completely compounded the powders to $Ni_2Si$. The maximum density of sintered lumps by HIP method was 99.5% and the maximum density of the sintered lump by SPS method was 99.3%. with the hardness of HRc 66 with the hardness of HRc 63. Therefore, the SPS method that can sinter in short time at low cost is considered to be more economical that the HIP method that requires complicated sintering conditions and high cost and the sintering can produce target materials in desired sizes and shapes to be used for thin film.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.676-681
• /
• 2001

We usually divide the noise of exhaust system into pulsation noise and flow noise. Pulsation noise is the shock wave to occur when the burning gas of low pressure emits and include harmonic having basic frequency as the exhaust cycle of engine. Flow noise is the noise that is produced when gas flow emits into the atmosphere through the pipe and has the character of frequency like pink noise which has the high level of high frequency component. A muffler is divided into reflective type and absorptive type. We usually use the muffler compounding the property of them. In this study, it is the case of transfer matrix method that a muffler is compounded to analyze the elements of each section according to sound wave's proceed direction. But we use simple model. So, we use finite element method that takes short time to analyze. Acoustic analysis gives us transfer matrix to use FEA of SYSNOISE and we use STAR-CD for fluid analysis. We made database that is based on analytical results about the muffler of expansion type, extended type, offset type, reverse type, and perforated type and developed the muffler design system to perform work efficiently.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1231-1234
• /
• 2003

Pneumatic servo valve which is widely applied in industrial world is advanced technology compounded with electric, electronic and machine. And It is consist of Linear Force Motor. Spool Commutation Mechanism and Microprocessor. In this study, we accomplished test method of Linear Force motor test, Static characteristic test, Dynamic characteristic test for KS(Koran industrial standard) of Pneumatic servo valve. we accomplished study about the main item of Static characteristic test which is related to unload flow characteristic test. And Dynamic characteristic test was step input test and frequency response test. Specially about frequency response test, There was a difficulty resulting from the time delay problem caused by the basic compressibility of air. In order to solve the problem in this study. we proposed two methods. First, displacement of the servo valve spool was directly measured by using a laser sensor. Second, method of calculating control flow by measuring pressure and temperature of chamber.

• 한국전자통신학회논문지
• /
• 제6권6호
• /
• pp.987-991
• /
• 2011

본 논문에서는 인체의 운동 변화를 홈 네트워크 방식으로 측정하고 확인할 수 있는 헬스 케어 시스템을 구현하였다. 제안되는 시스템은 트레드밀 운동 또는 사이클 운동 자세에서, 그 운동의 변화에 따라 신호 전달 장치를 통하여 실시간으로 전달되는 생체 신호를 데이터 획득 장치를 통하여 얻고, 그 데이터를 분석 장치에서 논리적으로 분석하여 자세에 대한 평가를 할 수 있도록 구성하였다. 측정파라미터의 항목을 혈압(Blood Pressure), 온도(Temperature), 낙상(Fall Index), 무게분포도(WDI), 체질량지수(BMI) 등으로 함으로서 측정값을 통하여 신체적 변화정도를 확인하고, 신체의 상태를 평가할 수 있도록 감시 체제를 구성하였다.

• 한국염색가공학회지
• /
• 제31권2호
• /
• pp.88-97
• /
• 2019

In this study, when printed on a nylon material, the color strength and fastness are lower than that of a polyester material, and the nylon material shrinks due to heat and pressure, resulting in poor design and poor compatibility. To overcome this problem, we investigated the possibility of transfer DTP by adding pre-treatment process to nylon transfer DTP process. For the basic study of pre-treatment preparation, we used pure nylon material which is not compounded and dispersion ink and transfer paper applied to existing PET transfer DTP. Pre-treatment preparations were classified into three types of acryl-base polymer and pre-treated with nylon and then applied to transfer DTP to confirm their color strength and fastness. The color strength of the pre-treated nylon material increased and poly-methyl-acrylate amulsion pre-treatment showed the best color at $210^{\circ}C$, 1.5m/min and 0.3MPa. The nylon material pre-treated with washing, friction, and light fastness was judged to be more excellent and stable.

• 폴리머
• /
• 제24권1호
• /
• pp.97-104
• /
• 2000

산화처리 된 평직형태의 탄소섬유와 resole 형태의 페놀수지를 7:3 중량비로 혼합하여 성형공정에 따라 탄소섬유/페놀수지 복합재료를 제조하였으며, 이를 다시 불활성 분위기에서의 탄화(100$0^{\circ}C$) 및 $CO_2$ 분위기에서 활성화(700, 800,, 900 및 100$0^{\circ}C$)시켜 PAN계 활성탄소섬유/페놀수지 복합재료를 제조하였다. 본 연구에서는, 이렇게 제조된 복합재료에 활성화 온도가 미치는 영향을 중화 적정법에 따른 pH, 표면 산도 및 표면 염기도 등의 표면성질과 BET 방법에 따른 비표면적, 기공구조 등의 흡착특성을 측정하여 고찰하였다. 또한, ASTM에 따라 시편에 걸리는 압력 손실을 측정하였다. 결과적으로, 활성화 온도는 그 표면 성질의 변화에 영향을 주어, 90$0^{\circ}C$ 이상의 온도에서 시료의 표면은 점차 염기성이 커지는 것을 확인할 수 있었다. 또한, 비표면적, 총 기공 부피 및 기공 크기 분포도 등의 발달은 활성화 온도의 증가에 따라 점차 증가함을 쉽게 확인할 수 있으며, 그 중 활성화 온도가 90$0^{\circ}C$인 경우 가장 발달한 것으로 나타났다. 마찬가지로, 활성화 온도의 증가에 따라 시편 양 단면에 걸리는 압력손실은 점차 감소하였으며, 이것은 열처리 온도에 의한 활성탄소섬유 복합재료의 질량손실에 의한 것으로 사료된다.