• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.11-15
• /
• 2018

Torque tubes in High Temperature Superconducting (HTS) motor transfer torque from superconducting field winding rotor to the room temperature shaft. It should have minimum heat conduction property for minimizing the load on cryo-refrigerator. Generally, these torque tubes are made with stainless steel material because of high strength, very low outgassing and low thermal contraction properties at cryogenic temperatures and vacuum conditions. With recent developments in composite materials, these torque tubes could be made of composites such as Kevlar and S-Glass, which have the required properties like high strength and low thermal conductivity at cryogenic temperatures, but with a reduced weight. Development and testing of torque tubes made of these composites for HTS motor are taken up at Bharat Heavy Electricals Limited (BHEL), Hyderabad in collaboration with Central Institute of Plastics and Engineering Technology (CIPET), Chennai and Indian Institute of Technology (IIT), Kharagpur. As these materials are subjected to vacuum, it is important to measure their outgassing rates under vacuum conditions before manufacturing prototype torque tubes. The present study focusses on the outgassing characteristics of Kevlar and S-Glass, using an Outgassing Measurement System (OMS), developed at IIT Kharagpur. The OMS facility works under vacuum environment, in which the test samples are exposed to vacuum conditions over a sufficient period of time. The outgassing measurements for the composite samples were obtained using pressure-rise technique. These studies are useful to quantify the outgassing rate of composite materials under vacuum conditions and to suggest them for manufacturing composite torque tubes used in HTS motors.

• 한국추진공학회지
• /
• 제23권4호
• /
• pp.28-34
• /
• 2019

본 연구에서는 터빈 냉각에 널리 사용되는 핀-휜 배열에 대한 연구를 진행하였다. 본 연구에서 원형 튜브 전방에 익형 와류발생기가 위치하며, 익형 단면 형상은 NACA-9410을 사용하였다. 본 논문에서는 와류 발생기가 있는 핀-휜 배열 유동의 전열 성능과 유동 특성을 수직인 방향으로 변화시키며 기존의 핀-휜 유동과 비교하였다. 레이놀즈수 영역은 6000, 10000 그리고 15000 세 가지를 계산하였다. 전산 해석은 상용 프로그램인 ANSYS v18.0 CFX, 난류 모델은 $k-{\omega}$ SST를 사용하였다. 결과적으로 전열 성능은 최대 5.8% 증가하였고 압력 손실은 1% 미만으로 증가하였다.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.14-24
• /
• 2018

몇 가지 전형적인 기존 및 진보된 초탄성 구성모델들의 고무패치 이축인장 및 구형 또는 원통형 풍선 팽창에서의 불안정성에 대해서 밝힌다. 적용할 구성모델은 neo-Hookean 모델, Mooney-Rivlin 모델, Gent 모델, Arruda-Boyce 모델, Fung 모델, Pucci-Saccomandi 모델 등이다. 팽창 및 분기 해석은 이들 변형에너지 함수들의 막 방정식을 이용하여 수행할 수 있다. 해석에는 사각패치에 대한 Kearsley의 분기현상, 고무풍선의 일반화 한 팽창현상, 고무풍선의 분기현상을 다룬다. 이들 변형에너지 함수들 중에서도 오직 Mooney-Rivlin 모델에서만 Kearsley의 분기현상이 일어남을 확인하였다. 팽창 방정식은 구형풍선과 원통형 풍선을 함께 다룰 수 있도록 일반화 시켰다. 팽창해석에 의하여 극한점과 임계 물성치들을 무차원 압력 및 팽창 부피의 항들로 구하였다. 그렇게 구해진 결과들로부터 분기현상을 구할 수 있었다. 또한 유한요소법을 사용하여 고무류의 구조적 불안정 문제들을 다룰 때 필요한 특별한 조처에 대해서 제안하였다. 결론적으로 고무류의 불안정성을 포함하는 문제를 다룰 때는 해석기법은 물론 구성모델의 선택에 따라 결과가 달라질 수 있으므로 신중한 처리가 요구된다.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.238-248
• /
• 2019

In the high-temperature and high-pressure irradiation environments, the multi-field coupling processes of hydrogen diffusion, hydride precipitation and mechanical deformation in Zircaloy cladding tubes occur. To simulate this hydrogen-induced complex behavior, a multi-field coupling method is developed, with the irradiation hardening effects and hydride-precipitation-induced expansion and hardening effects involved in the mechanical constitutive relation. The out-pile tests for a cracked cladding tube after irradiation are simulated, and the numerical results of the multi-fields at different temperatures are obtained and analyzed. The results indicate that: (1) the hydrostatic stress gradient is the fundamental factor to activate the hydrogen-induced multi-field coupling behavior excluding the temperature gradient; (2) in the local crack-tip region, hydrides will precipitate faster at the considered higher temperatures, which can be fundamentally attributed to the sensitivity of TSSP and hydrogen diffusion coefficient to temperature. The mechanism is partly explained for the enlarged velocity values of delayed hydride cracking (DHC) at high temperatures before crack arrest. This work lays a foundation for the future research on DHC.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.335-346
• /
• 2021

Since epoxy resin coating shows excellent properties in formability, adhesion, and corrosion resistance, they have been extensively used in many industries. However, various types of damages in the epoxy coated tube within a relative short time have been reported due to cavitation erosion, liquid impingement, variation of temperature and pressure. Nevertheless, there has been little research on the effect of temperature on the cavitation degradation of epoxy coatings. Therefore, this work used an ultrasonic cavitation tester to focus on the effect of solution temperature on the cavitation properties of 3 kinds of epoxy coatings in 3.5% NaCl. The cavitation properties were discussed basis on the material properties and environmental aspects. As the solution temperature increased, even though with large fluctuation, the cavitation degradation rates of A and B coatings were reduced rapidly, but the rate of C coating was decreased gradually. In addition to the cushioning effect, the reason that the cavitation degradation rate reduced with solution temperature was partly related to the brittle fracture and water absorptivity of the epoxy coatings, and the water density, but was little related to the shape and composition of the compound in the coatings or the phase transition of the epoxy coating.

• 대한청각학회지
• /
• 제24권4호
• /
• pp.204-209
• /
• 2020

Background and Objectives: Hearing loss (HL) and its repercussions are major problems in today's society. There are limited data on the relationship between degree of HL and otologic disorders. The aim of this study is to estimate mortality rates, rates of sudden idiopathic HL and related otologic surgical procedures in hearing disability patients in South Korea. Subjects and Methods: Retrospective medical data for 160,205 patients with hearing disability was extracted. Mortality rates, rates of sudden idiopathic HL and related otologic surgical procedures were compared with a normal control group consisting of 865,475 people; approximately 5 times the number of hearing disability patients. Results: According to the Korean National Disability Registry (NDR), 0.458% of the population in South Korea suffered from hearing disability in 2015. Higher rates of mortality and sudden idiopathic HL were reported in hearing disability patients, increasing up to a maximum of 1.594 times and 1,039.695 times, respectively, compared to the normal control group. Mastoidectomy surgery was 2.5 times more frequently performed and pressure equalizing (PE) tube insertion was about 15 times more frequently performed in hearing disability patients. Conclusions: Hearing disability is related to higher risks of mortality, sudden idiopathic HL and otologic surgical procedures, including mastoidectomy and PE tubing.

• Journal of Audiology & Otology
• /
• 제24권4호
• /
• pp.204-209
• /
• 2020

Background and Objectives: Hearing loss (HL) and its repercussions are major problems in today's society. There are limited data on the relationship between degree of HL and otologic disorders. The aim of this study is to estimate mortality rates, rates of sudden idiopathic HL and related otologic surgical procedures in hearing disability patients in South Korea. Subjects and Methods: Retrospective medical data for 160,205 patients with hearing disability was extracted. Mortality rates, rates of sudden idiopathic HL and related otologic surgical procedures were compared with a normal control group consisting of 865,475 people; approximately 5 times the number of hearing disability patients. Results: According to the Korean National Disability Registry (NDR), 0.458% of the population in South Korea suffered from hearing disability in 2015. Higher rates of mortality and sudden idiopathic HL were reported in hearing disability patients, increasing up to a maximum of 1.594 times and 1,039.695 times, respectively, compared to the normal control group. Mastoidectomy surgery was 2.5 times more frequently performed and pressure equalizing (PE) tube insertion was about 15 times more frequently performed in hearing disability patients. Conclusions: Hearing disability is related to higher risks of mortality, sudden idiopathic HL and otologic surgical procedures, including mastoidectomy and PE tubing.

• Archives of Plastic Surgery
• /
• 제49권3호
• /
• pp.378-396
• /
• 2022

Several reconstructive methods have been reported to restore the continuity of the aerodigestive tract following resection of pharyngeal and hypopharyngeal cancers. However, high complication rates have been reported after voice prosthesis insertion. In this setting, the ileocolon free flap (ICFF) offers a tubularized flap for reconstruction of the hypopharynx while providing a natural phonation tube. Herein, we systematically reviewed the current evidence on the use of the ICFF for reconstruction of the aerodigestive tract. A systematic literature search was conducted across PubMed MEDLINE, Web of Science, ScienceDirect, Scopus, and Ovid MEDLINE(R). Data on the technical considerations and surgical and functional outcomes were extracted. Twenty-one studies were included. The mean age and follow-up were 54.65 years and 24.72 months, respectively. An isoperistaltic or antiperistaltic standard ICFF, patch flap, or chimeric seromuscular-ICFF can be used depending on the patients' needs. The seromuscular chimeric flap is useful to augment the closure of the distal anastomotic site. The maximum phonation time, frequency, and sound pressure level (dB) were higher with ileal segments of 7 to 15 cm. The incidence of postoperative leakage ranged from 0 to 13.3%, and the majority was occurring at the coloesophageal junction. The revision rate of the microanastomosis ranged from 0 to 16.6%. The ICFF provides a reliable and versatile alternative for reconstruction of middle-size defects of the aerodigestive tract. Its three-dimensional configuration and functional anatomy encourage early speech and deglutition without a prosthetic valve and minimal donor-site morbidity.

• 마이크로전자및패키징학회지
• /
• 제30권4호
• /
• pp.1-7
• /
• 2023

임의의 3D 구조물을 제작할 수 있는 3D/4D 프린팅 기술의 능력은 프린트된 구조물 디자인에 높은 자유도를 제공합니다. 이와 같은 능력은 전자기기 및 바이오 의료 응용분야에 장치 소형화, 맞춤화, 그리고 개인화 추세에 영향을 주고 있습니다. 본 Review 논문에서는, 3D/4D 프린팅 기술을 통해 만들어진, 독특하고 특이한 특성을 가진 3D 프린트된 전자기기 및 바이오 의료 응용 분야의 최신 정보를 살펴봅니다. 구체적으로, 재활용 및 분해 가능한 전자기기, 메타물질 기반 압력 센서, fully 프린트된 휴대용 광검출기, 생체 적합 및 고강도를 가진 치아, 자연모사 마이크로니들, 그리고 3D 세포 배양 및 히스톨로지를 위한 형태 변형 가능한 튜브 어레이와 같은 신흥 영역들을 소개합니다.

• 한국산업정보학회논문지
• /
• 제28권6호
• /
• pp.21-27
• /
• 2023

현대 함정은 외부로 방사되는 적외선 신호를 낮추기 위해 폐기관에 적외선 신호저감 장치(Infra-Red Signature Suppression system, IRSS)를 설치한다. 그리고 함정은 생의 주기가 매우 긴 전략 자산으로 탑재 장비들의 성능에 대한 높은 신뢰성을 충분히 확보해야 한다. 따라서, IRSS와 같은 장비들은 설계 단계에서 모형시험을 통해 성능평가를 하고 있다. IRSS의 모형시험에서는 다양한 계측기기들이 사용된다. 그러므로, 모형시험 단계 이전에 계측기들의 신뢰성을 평가해야 한다. 본 연구에서는 IRSS 모형시험에 사용되는 계측 장비들의 신뢰성 평가에 관한 연구를 수행하였다. 시험 장비와 계측기는 열 풍동 시험기, 피토 튜브와 디지털 차압계, 열전대 센서 그리고 디지털 기록계가 사용되었다. 계측 결과 열 풍동 시험기의 풍속이 증가할수록 유동의 계측 편차가 감소하였으며, 열전대 센서의 온도는 사용 방법에 따라 반응 속도 및 민감도의 차이를 보였다.