• Journal of the Society of Disaster Information
• /
• v.9 no.4
• /
• pp.449-461
• /
• 2013

As the hydrofluoric acid leak in Gumi-si, Gyeongsangbuk-do or hydrochloric acid leak in Ulsan, Gyeongsangnam-do demonstrated, chemical related accidents are mostly caused by large amounts of volatile toxic substances leaking due to the damages of storage tank or pipe lines of transporter. Safety assessment is the most important concern because such toxic material accidents cause human and material damages to the environment and atmosphere of the surrounding area. Therefore, in this study, a hydrofluoric acid leaked from a storage tank was selected as the study example to simulate the leaked substance diffusing into the atmosphere and result analysis was performed through the numerical Analysis and diffusion simulation of ALOHA(Areal Location of Hazardous Atmospheres). the results of a qualitative evaluation of HAZOP (Hazard Operability)was looked at to find that the flange leak, operation delay due to leakage of the valve and the hose, and toxic gas leak were danger factors. Possibility of fire from temperature, pressure and corrosion, nitrogen supply overpressure and toxic leak from internal corrosion of tank or pipe joints were also found to be high. ALOHA resulting effects were a little different depending on the input data of Dense Gas Model, however, the wind direction and speed, rather than atmospheric stability, played bigger role. Higher wind speed affected the diffusion of contaminant. In term of the diffusion concentration, both liquid and gas leaks resulted in almost the same $LC_{50}$ and ALOHA AEGL-3(Acute Exposure Guidline Level) values. Each scenarios showed almost identical results in ALOHA model. Therefore, a buffer distance of toxic gas can be determined by comparing the numerical analysis and the diffusion concentration to the IDLH(Immediately Dangerous to Life and Health). Such study will help perform the risk assessment of toxic leak more efficiently and be utilized in establishing community emergency response system properly.

• Journal of Chest Surgery
• /
• v.40 no.3 s.272
• /
• pp.168-179
• /
• 2007

Background: The recent trend of an increasing number of patients with acute cardiogenic shock or chronic congestive heart failure following myocardial infarction, as well as the considerable number who can not be weaned from cardiopulmonary bypass after open heart surgery, call for immediate efforts to develop affordable ventricular assist devices that are suitable for the Korean physique. Recently, a pneumatic pulsatile ventricular assist device (VAD), named DKUH-75, has been developed by the Department of Biomedical Engineering, in collaboration with the Department of Thoracic and Cardiovascular Surgery of Dankook University College of Medicine. The feasibility of the DKUH-75 VAD was evaluated on the bases of common hemodynamic variables and echocardiographic measurements in pigs, which are subjected to an acute cardiogenic shock state following myocardial infarction, using a novel coronary artery ligation method employing the ischemic preconditioning concept. Material and Method: Acute cardiogenic shock was induced in 10 Yorkshire Landrace Duroc strain pigs by ligating the left anterior descending coronary artery via an ischemic preconditioning process. The hemodynamic variables were monitored, with epicardial echocardiographic measurements performed before and one hour after the ligation. The DKUH-75 VAD was implanted into 5 pigs one hour after the onset of the shock. The hemodynamic variables and echocardiographic measurements were taken one hour after installation of the VAD. Result: The systolic, diastolic and mean systemic arterial pressures were significantly decreased in all the experimental animals one hour after the ligation. The systolic, diastolic and mean pulmonary arterial pressures were increased (Eds note: this completely contradicts the preceding statement? However, if you mean the non-experimental animals this should be stated?). The left ventricular end diastolic pressure (LVEDP) was increased, but the cardiac index decreased, An increase in the left ventricular end systolic dimension and decreases in the fractional shortening and ejection fraction were observed all animals one hour after the coronary artery ligation. In all 5 of the VAD implanted pigs, the systolic and mean systemic arterial pressures were increased, and the pulmonary arterial pressures decreased one hour after the implantation; the LVEDP decreased, but the cardiac index was significantly increased, In the echocardiographic measurements, the left ventricular end systolic dimension decreased after the implantation of the VAD, but the fractional shortening and ejection fraction significantly increased. Conclusion: Significant improvements in the hemodynamic variables and echocardiographic measurements were observed in the 5 VAD implanted animals one hour after installation, which had been subjected to an acute cardiogenic shock state by ligation of the coronary artery, indicating that the DKUH-75 VAD could help in the recovery of the myocardial function. This suggests that the DKUH-75 VAD is feasible in the short term in relation to an acute cardiogenic shock state due to myocardial infarction.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.6
• /
• pp.944-955
• /
• 2000

Background : In patients with chronic obstructive pulmonary disease(COPD), several factors have been associated with a poor prognosis. These include old age, low $FEV_1$ low diffusing capacity, high alveolar-arterial oxygen pressure difference, and finally cor pulmonale. This study was done to investigate if the ECG signs suggesting cor pulmonale were independent prognostic factors in patients with COPD. Method : We analyzed ECG, pulmonary function data and arterial blood gas values in 61 patients who were admitted through the emergency department with an acute exacerbation of COPD. The ECG signs reflecting cor pulmonale were right strial overloading(RAO), right bundle branch block, right ventricular hypertrophy and low-voltage QRS. The 61 patients were divided into 2 groups ; group I with no ECG signs(n=36) and group II with one or more ECG signs(n=25) suggesting cor, pulmonale. Results : Poor, prognostic factors by univariate analysis were low $FEV_1$, $FEV_1$ % pred., VC % pred., DLco, DLco % pred., $PaO_2$ and $SaO_2$ high $PaCO_2$ presence of ECG signs reflecting cor pulmonale, presence of mental status change, use of mechanical ventilator, and long term use of glucocorticoid. A multivariate analysis indicated that age(risk ratio=1.13, 95% confidence interval 1.05-1.23), DLco % pred. (risk ratio=0,97. 95% confidence interval 0.94-0.99), $PaO_2$ (risk ratio=0.95, 95% confidence interval 0.90-0.99) and RAO(risk ratio=5.27, 95% confidence interval 1.40-19.85) were independent prognostic factors of survival. There was a significant difference in survival between the patients with and without RAO(p=0.038). The survival rates at 1, 2, and 5 years were 94.5%. 81.4%, and 50.0% in patients without RAO and 82.4%, 70.6%, and 27.5% in patients with RAO, respectively. Conclusion : These results suggest that the presence of ECG signs reflecting cor pulmonale is a predictor of survival and that RAO of these ECG signs is a significant independent predictor of survival in patients with COPD.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.6
• /
• pp.1225-1233
• /
• 1997

Background : Cervical tuberculous lymphadenitis(CTL) is one of the most common extra-pulmonary tuberculosis. Recently overall incidence of pulmonary tuberculosis has decreased, but the incidence of tuberculous lymphadenitis has not decreased. Its duration of treatment is still controversial and the pathogenesis, prognosis and relationship with other site tuberculous are poorly published. So we did a retrograde study of 120 cases of confirmed CTL about its clinical manifestations. Method : All patients were applied fine needle aspiration(FNA) of palpable enlarged cervical lymph nodes and 114 patients were examined for AFB smear and 34 patients for TB culture with aspirated fluid. 57 patients were examined Mantoux test(5TU with PPD-S). With above methods, a total of 120 patients was diagnosed as having CTL. Results : 1) CTL is most prevalent in young women between the age of 20~30 years and the incidence of CTL in female is 2.5 times higher than that of male. It is located most commonly in the posterior cervical area. The most common presenting symptom is painless palpable enlarged cervical lymph nodes. 2) With FNA of enlarged cervical lymph nodes, the percentage of histopathological positivity is 82.3%. The percentage of AFB smear positivity is 38.6%, and that of TB culture positivity is 17.6%(p<0.001). 3) Pulmonary tuberculosis is noted in 79 cases(65.8%). And 42 cases(53.5%) of them had minimal pulmonary tuberculosis. In 14 cases(11.7%), other extrapulmonary tuberculosis coexsisted and pleural tuberculosis was most Common in the order. 4) CTL was treated with anti-tuberculous medication(first line drug) and median treatment duration was 18.5months. During treatment, the size of involved lymph nodes decreased gradually in 62 cases(75.8%), newly developed lymph nodes were found in 25 cases(30.4%), fluctuation formation in 22 cases(26.8%) and fistula formation in 14 cases(17.0%). Conclusion : CTL is prevalent in women between the age of 20~40 years and it involves posterior cervical area most commonly. CTL is treated with long-term anti-tuberculous chemotherapy. We think it is one manifestation of systemic disease and frequently coexisting with pulmonary tuberculosis. Despite anti-tuberculous chemotherapy, the size of involved lymph nodes was increased, new lymph nodes were developed or fluctuation and fistula formed in involved lymph nodes. After sufficient medication, when the patient felt pressure discomfort from enlarged lymph node or fistula was formed, we recommended total excision of involved lymph nodes.

• Journal of Chest Surgery
• /
• v.42 no.6
• /
• pp.696-703
• /
• 2009

Background: A Comprehensive Aortic Root and Valve Reconstruction (CARVAR) procedure is comprised of aortic root wall reconstruction and corrections of the leaflets for treating various aortic valve diseases. We evaluated our recent early clinical experience with the CARVAR procedure. Material and Method: From October 2007 to September 2008, 114 cases (66 males) of CARVAR procedures were performed, The mean patient age was 53 years (range: 14~84) The patients were divided into 4 groups: 1) the AAR group: aortic regurgitation with aortic root wall deformity such as annulo-aortic ectasia or ascending aortic aneurysm (n=18), 2) the IAR group: isolated AR with leaflet abnormality (n=42), 3) the IAS group: isolated aortic stenosis (n=51) and 4) the PAVR group: previous aortic valve replacement (n=3). Sinotubular junction (STJ) reduction was done in all the patients, leaflet correction was done in 10 of the AAR group patients and in all the patients of the other groups, annulus reduction was done in 14 of the MR group patients and in 6 of the IAR group patients. Aortic dissection was excluded from this analysis. Result: There was no mortality or follow-up death. The diameter of the aortic sinus decreased from $54.6{\pm}8.4$ mm to $38.3{\pm}3.8$ mm in the AAR group, the mean AR grade decreased from 3.2 to 0.2 in the IAR group, the mean aortic valve pressure gradient decreased from $47.1{\pm}24.4$ mmHg to $15.1{\pm}11.7$ mmHg in the IAS group and the mean AR grade decreased to 0 in the PAVR group. Balloon type coronary perfusion cannula-related coronary ostial stenosis developed in 4 patients and this was treated with OPCAB in three patients and with PTCA in one patient. Two patients developed postoperative infectious endocarditis. All the patients were discharged and followed up in a stable condition. Conclusion: The CARVAR procedure showed excellent short term results, but a good further follow up result is required to apply this procedure to most kinds of aortic valve diseases.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.451-464
• /
• 2022

The high-level nuclear waste repository is a deep geological disposal system exposed to complex environmental conditions such as high temperature, radiation, and ground-water due to handling spent nuclear fuel. Continuous exposure can lead to cracking and deterioration of the structure over time. On the other hand, the high-level nuclear waste repository requires an ultra-long life expectancy. Thus long-term structural health monitoring is essential. Various sensors such as an accelerometer, earth pressure gauge, and displacement meter can be used to monitor the health of a structure, and a piezoelectric sensor is generally used. Therefore, it is necessary to develop a highly durable sensor based on the durability assessment of the piezoelectric sensor. This study designed an accelerated life test for durability assessment and life prediction of the piezoelectric sensor. Based on the literature review, the number of accelerated stress levels for a single stress factor, and the number of samples for each level were selected. The failure mode and mechanism of the piezoelectric sensor that can occur in the environmental conditions of the high-level waste repository were analyzed. In addition, two methods were proposed to investigate the maximum harsh condition for the temperature stress factor. The reliable operating limit of the piezoelectric sensor was derived, and a reasonable accelerated stress level was set for the accelerated life test. The suggested methods contain economical and practical ideas and can be widely used in designing accelerated life tests of piezoelectric sensors.

• The Korean Journal of Archival Studies
• /
• no.8
• /
• pp.137-180
• /
• 2003

The term 'Business Archives' is not familiar with us in our society. Some cases can be found that materials are collected for publishing the history of a firm on commemoration of some decades of its foundation. However, the appropriate management of these collected materials doesn't seem to be followed in most of companies. The Records and archives management is inevitable in order to maximize the utility of Information and knowledge in the business world. The interest in records management has been grown, especially in the fields of business management and information technology. However, the importance of business archives hasn't been conceived yet. And also no attention has been paid to the business archives as social resources and the responsibility of the society as a whole for their preservation. The company archives doesn't have a long history in Germany although the archives of the nation, the aristocracy, communes and churches have a long tradition. However the company archives of Krupps which was established in 1905, is regarded as the first business archives in the world, It means that Germany has taken a key role to lead the culture of business archives. This paper focuses on the process of the establishment of business archives in Germany and its characteristics. The business archives in Germany can be categorized in three types: company archives, regional business archives and branch archives. It must be noted here that each type of these was generated in the context of the accumulation of the social resources and its effective use. A company archives is established by an individual company for the preservation of and use of the archives that originated in the company. The holdings in the company archives can be used as materials for decision making of policies, reporting, advertising, training of employees etc. They function not only as sources inside the company, but also as raw sources for the scholars, contributing to the study of the social-economic history. Some archives of German companies are known as a center of research. A regional business archives manages materials which originated m commerce chambers, associations and companies in a certain region. There are 6 regional business archives in Germany. They collect business archives which aren't kept in a proper way or are under pressure of damage in the region for which they are responsible. They are also open to the public offering the sources for the study of economic history, social history like company archives, so that they also play a central role as a research center. Branch business archives appeared relatively late in Germany. The first one is established in Bochum in 1969. Its general duties and goals are almost similar with ones of other two types of archives. It has differences in two aspects. One is that the responsibility of the branch business archives covers all the country, while regional business archives collects archives in a particular region. The other is that a branch business archives collects materials from a single industry. For example, the holdings of Bochum archives are related with the mining industry. The mining industry-specialized Bochum archives is run as an organization in combination with a museum, which is called as German mine museum, so that it plays a role as a cultural center with the functions of exhibition and research. The three types of German business archives have their own functions but they are also closely related each other under the German Association of Business Archivists. They are sharing aims to preserve primary materials with historical values in the field of economy and also contribute to keeping the archives as a social resources by having feed back with the public, which leads the archives to be a center of information and research. The German case shows that business archives in a society should be preserved not only for the interest of the companies, but also for the utilities of social resources. It also shows us how business archives could be preserved as a social resource. It is expected that some studies which approach more deeply on this topic will be followed based on the considerations from the German case.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.4
• /
• pp.24-43
• /
• 2015

Since 2011, when Oegyujanggak Uigwe(Records of the State Rites of the Joseon Dynasty) were returned from France, which were looted in 1866 by the French Navy, national attention to our cultural properties abroad was explosively increased and public pressure has been mounting that those cultural properties should be returned in Korea. According to the statistics of "Overseas Korean Cultural Heritage Foundation" Korean cultural Properties, which exist in foreign countries, amounts 160,342 in total 20 countries. Among them about half of them are estimated to be illegally exported cultural property, these are to be restituted. However, in reality it is not so easy to restitute illegally exported cultural properties. For this, it needs to be established a long-term and systematic plan for return of cultural properties from other countries. This paper starts from such a critical mind and tries to find legal policy measures for the return of illegally exported cultural properties. To this end, the author first describes motive and aim of this research in chapter I. and overviews basic understanding and current situation of export of cultural property as well as means and methods of return of cultural property in chapter II. and then deals with international and national norms that are involved in the dispute concerned return of cultural properties in chapter III. Based on this research, in chapter IV., which can be considered as a key part of this paper, the author proposed nine legal policy measures for restitution of cultural properties from foreign countries. That is, actual condition survey of cultural properties in foreign countries, unified management and implement of export ID on cultural properties, fund-raising for the diversification of means of return of cultural properties. local utilization of cultural properties, joining in the multilateral conventions and expansion of the bilateral agreements, restitution and cooperation through international organizations, restitution through lawsuit and arbitration, training experts on restitution of cultural property and networking with foreign experts. Finally, the author summarized his opinion in chapter V. which comprehended researching the above.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.183-202
• /
• 2019

For design and performance assessment of a high-level radioactive waste (HLW) disposal system, it is necessary to understand the characteristics of coupled thermo-hydro-mechanical (THM) behavior. However, in previous studies for the Korean Reference HLW Disposal System (KRS), thermal analysis was performed to determine the spacing of disposal tunnels and interval of disposition holes without consideration of the coupled THM behavior. Therefore, in this study, TOUGH2-MP/FLAC3D is used to conduct THM modeling for performance assessment of the Korean Reference HLW Disposal System (KRS). The peak temperature remains below the temperature limit of $100^{\circ}C$ for the whole period. A rapid rise of temperature caused by decay heat occurs in the early years, and then temperature begins to decrease as decay heat from the waste decreases. The peak temperature at the bentonite buffer is around $96.2^{\circ}C$ after about 3 years, and peak temperature at the rockmass is $68.2^{\circ}C$ after about 17 years. Saturation of the bentonite block near the canister decreases in the early stage, because water evaporation occurs owing to temperature increase. Then, saturation of the bentonite buffer and backfill increases because of water intake from the rockmass, and bentonite buffer and backfill are fully saturated after about 266 years. The stress is calculated to investigate the effect of thermal stress and swelling pressure on the mechanical behavior of the rockmass. The calculated stress is compared to a spalling criterion and the Mohr-Coulumb criterion for investigation of potential failure. The stress at the rockmass remains below the spalling strength and Mohr-Coulumb criterion for the whole period. The methodology of using the TOUGH2-MP/FLAC3D simulator can be applied to predict the long-term behavior of the KRS under various conditions; these methods will be useful for the design and performance assessment of alternative concepts such as multi-layer and multi-canister concepts for geological spent fuel repositories.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.1
• /
• pp.40-46
• /
• 2013

The isotope ratios of $^{13}C/^{12}C$ and $^{18}O/^{16}O$ for a sample in a mass spectrometer are measured relative to those of a pure $CO_2$ reference gas (i.e., laboratory working standard). Thus, the calibration of a laboratory working standard gas to the international isotope scales (Pee Dee Belemnite (PDB) for ${\delta}^{13}C$ and Vienna Standard Mean Ocean Water (V-SMOW) for ${\delta}^{18}O$) is essential for comparisons between data sets obtained by other groups on other mass spectrometers. However, one often finds difficulties in getting well-calibrated standard gases, because of their production time and high price. Additional difficulty is that fractionation processes can occur inside the gas cylinder most likely due to pressure drop in long-term use. Therefore, studies on laboratory production of pure $CO_2$ isotope standard gas from stable solid calcium carbonate standard materials, have been performed. For this study, we propose a method to extract pure $CO_2$ gas without isotope fractionation from a solid calcium carbonate material. The method is similar to that suggested by Coplen et al., (1983), but is better optimized particularly to make a large amount of pure $CO_2$ gas from calcium carbonate material. The $CaCO_3$ releases $CO_2$ in reaction with 100% pure phosphoric acid at $25^{\circ}C$ in a custom designed, evacuated reaction vessel. Here we introduce optimal procedure, reaction conditions, and samples/reactants size for calcium carbonate-phosphoric acid reaction and also provide the details for extracting, purifying and collecting $CO_2$ gas out of the reaction vessel. The measurements for ${\delta}^{18}O$ and ${\delta}^{13}C$ of $CO_2$ were performed at Seoul National University using a stable isotope ratio mass spectrometer (VG Isotech, SIRA Series II) operated in dual-inlet mode. The entire analysis precisions for ${\delta}^{18}O$ and ${\delta}^{13}C$ were evaluated based on the standard deviations of multiple measurements on 15 separate samples of purified $CO_2$. The pure $CO_2$ samples were taken from 100-mg aliquots of a solid calcium carbonate (Solenhofen-ori $CaCO_3$) during 8-day experimental period. The multiple measurements yielded the $1{\sigma}$ precisions of ${\pm}0.01$‰ for ${\delta}^{13}C$ and ${\pm}0.05$‰ for ${\delta}^{18}O$, comparable to the internal instrumental precisions of SIRA. Therefore, we conclude the method proposed in this study can serve as a way to produce an accurate secondary and/or laboratory $CO_2$ standard gas. We hope this study helps resolve difficulties in placing a laboratory working standard onto the international isotope scales and does make accurate comparisons with other data sets from other groups.