• 한국세라믹학회지
• /
• 제45권2호
• /
• pp.132-137
• /
• 2008

The main purpose of this study is enhancing the filtering efficiency, performance and durability of filter by growing SiC whiskers on cordierite honeycomb substrate. The experiment was performed by Chemical Vapor Infiltration (CVI) in order to control pore morphology of substrate. Increasing the mechanical strength of porous substrate is one of important issues. The formation of "networking structure" in the pore of porous substrate increased mechanical strength. The high pressure gas injection to the specimen showed that a little of whiskers were separated from substrate but additional film coating enhanced the stability of whisker at high pressure gas injection. Particle trap test was performed. More nano-particle was trapped by whisker growth at the pore of substrate. Therefore it is expected that the porous cordierite which deposited the SiC whisker will be the promising material for the application as filter trapping the nano-particles.

• 한국주조공학회지
• /
• 제20권3호
• /
• pp.167-172
• /
• 2000

Squeeze casting was performed to fabricate the SiC whisker reinforced magnesium matrix composites, and the suitability of the squeeze casting for the production of the sound composites was determined by micro/macro-structures observations and tensile test. The two-directional infiltration of the melt and the removal of air during infiltration using the devised mold were necessary to produce the composites. The pressure of 100 MPa was effective for the production of composites with the SiC whisker volume fraction of 30%, but the pressure should be lower than 50 MPa in case of below 20% in the volume fraction. The SiC whiskers in the squeeze cast composites were randomly and densely aligned, and the SiC whiskers/magnesium interfaces were continuously well-bonded. The elastic modulus, 0.2% proof stress and tensile strength in the composite were about 2.5times, l0times and 4times as large as those of magnesium, respectively, indicating that the squeeze casting sufficiently provides the high strength magnesium composites reinforced with SiC whiskers.

• 대한간호학회지
• /
• 제34권6호
• /
• pp.924-933
• /
• 2004

Purpose: This study was to examine the effects of hand massage and hand holding as nursing interventions on the anxiety in patients with local infiltration anesthesia. Method: The design of this study was a nonequivalent, control group, non- synchronized design. The subjects of this study consisted of 15 patients for the hand massage group, 15 patients for the hand holding group and 17 patients for the control group awaiting surgery in the operation room of a general hospitalin Daegu. As an experimental treatment, hand massage was carried out by the Hand Massage Protocol developed by Snyder(1995) and interpreted by Cho(1998) and hand holding developed by Cho(1998). The data were analyzed by SPSS/WIN, T-test, ANOVA, Cronbach's a, and the Scheffe test. Results: The hand massage group and hand holding group were more effective than the control group in reducing anxiety, VAS score, systolic blood pressure and pulse rate. Conclusion: Hand massage and hand holding are effective nursing interventions that alleviates the psychological and physiological anxiety of patients with local infiltration anesthesia. In particular, the simple contact of hand holding is regarded as an effective and easily accessible nursing intervention in the operating room.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.811-818
• /
• 2005

Stability analyses on the 17 railroad cut-off soil slopes were carried out. The influences of rainfall infiltration on the slope stabilities were taken into account by seepage analyses using finite element method and by assuming ground water tables to be located adjacent to soil surface. The validity of those analyses were evaluated by comparing the slope failure characteristics between analysis results and the past failure records. The analyses were not appropriate to estimate the failure surface and the method considering only the increase of pore-water pressure (reduction of matric suction) as the influence of rainfall cannot appropriately estimate the surficial failures that occurred most of the cut-off soil slopes. For the better estimation of the surficial failure, the influence of water flows over slope surface which erode soil mass and/or increase driving force, should be evaluated and considered.

• 지질공학
• /
• 제18권2호
• /
• pp.127-136
• /
• 2008

지반의 수분량 분포 및 강우에 의한 침윤선 거동과 지하수 수위 분포조사와 같이 광역지역을 대상으로 한 물리탐사기법인 지하투과 레이다탐사(ground penetrating radar, GPR) 및 전기비저항탐사(electrical resistivity survey)등을 이용해 광역조사가 이루어지며, 이에 반해 지반의 유전 반응(dielectric responses)을 이용한 유전율 측정법(permittivity method)은 협소한 지점에 대한 보다 정확한 지반의 물성 파악을 위해 다양한 연구분야에서 적용되어 왔다. 본 연구에서는 불포화 지반에 인공강우를 내려 침윤선의 침투거동을 파악하기 위하여 토층의 수분량 변화를 frequency domain reflectometry 시험법을 적용하여 측정하고, 간극수압과 간극 공기압의 변화는 간극수압계로 측정하였다. 이들 측정센서는 일정 깊이의 불포화 화강풍화토 공시체 몰드에 매설하고, 상단부에서부터 강우의 침투수 거동을 계측하여 물성치 변화로부터 수분분포 및 침윤선 분포특성을 평가하는 기법을 제안하였다. 지반 변형을 효율적으로 평가하기 위해 지반의 체적함수비, 간극수압 및 간극공기압의 측정 기술을 기존의 측정법과 비교해 신속하고 정량적으로 파악할 수 있는 측정방법에 대한 연구를 진행할 예정이다.

• 한국조경학회지
• /
• 제36권4호
• /
• pp.111-119
• /
• 2008

합리식은 배수시설을 설계하기 위한 기본방정식으로 이용되고 있으며, 유출계수, 강우강도와 유역면적의 함수이다. 본 연구에서는 조경공간의 배수시설설계에 이용되는 합리식의 유출계수를 블록포장지역을 대상으로 지역적 강우분포를 고려하여 산정하였다. 합리식의 유출계수는 강우강도와 유출량의 비로 나타낼 수 있다. 강우강도는 재현기간과 강우지속기간의 함수로, 강우의 특성상 지역에 따라 변한다. 따라서 합리식의 유출계수는 동일한 재현기간과 강우지속기간일지라도 지역에 따라 강우강도가 변하므로 지역에 따라 변한다. 또한, 강우강도와 유출량의 비는 강우량에 대한 손실량에 따라 결정되므로, 손실량을 산정하기 위하여 본 연구에서는 Horton의 침투법칙 중 종기침투능을 이용하였다. 블록포장지역의 침투는 줄눈을 통하여 발생하며, 줄눈은 시간이 지남에 따라 황사, 오염물질, 꽃가루 등에 의하여 공극이 메워지고, 답압 등에 의하여 다져질 것이므로, 침투능은 감소할 것이다. 시공연한이 다른 6개 지역의 블록포장지역을 대상으로 Horton의 종기침투능을 산정하여 시간이 지남에 따라 침투능이 감소하는 것을 확인하였고, 지역별 재현기간 10년에 대한 강우지속기간 10, 20 및 30분에 해당하는 강우강도를 선정하여, 합리식의 유출계수를 산정하였다. 본 연구의 결과로, 산정 된 블록포장지 역의 유출계수 범위는 재현기간 10년, 강우지속기간 10분의 경우 지역에 따라 $0.94{\sim}0.84$의 범위를 가진다.

• 동력기계공학회지
• /
• 제19권1호
• /
• pp.50-55
• /
• 2015

This study takes AC8A, which is a representative light weight alloy as matrix, and nickel as reinforcement for its superior properties. The manufacturing method applied in this study required low pressure for the infiltration of the metal matrix into the reinforcement. Porous Ni was applied as preform. The fabrication was conducted under 0.3 MPa at 600, 700 and 750 degrees centigrade, respectively. Intermetallic compounds Al3 generated between Al and Ni were observed in the composites. Microstructure, Vickers' hardness and wear characteristics of the composites were also investigated. The result indicates that the structures of compounds created at 650 degree centigrade were distributed densely; the grain size of the substances and the compounds was increased with the infiltration temperature.

• Korea-Australia Rheology Journal
• /
• 제21권1호
• /
• pp.71-79
• /
• 2009

The incomplete saturation and the void formation during the resin infiltration into fibrous porous media in the resin transfer molding process cause failure in the final product during its service. In order to better understand flow behavior during the filling process, a finite-element scheme for transient flow simulation across the micro-structured fibrous media is developed in the present work. A volume-of- fluid (VOF) method has been incorporated in the Eulerian frame to capture the evolution of flow front and the vertical periodic boundary condition has been combined to avoid unwanted wall effect. In the microscale simulation, we investigated the transient filling process in various fiber structures and discussed the mechanism leading to the flow fingering in the case of random fiber distribution. Effects of the filling pressure, the shear-thinning behavior of fluid and the volume fraction on the flow front have been investigated for both intra-tow and the inter-tow flows in dual-scale fiber tow models.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.61-67
• /
• 2005

The purpose of this study is to evaluate the air tightness of Zero Energy Solar House(ZeSH) and to propose the construction improvement of junctions and penetrations where air infiltration was identified. Air leakage rate were measured by means of blower door test in accordance with ASTM E779-87. The results showed that ZeSH has an excellent airtightness with ACH50/20 (air change per hour at a pressure difference of 50 Pa between inside outside) of 0.34hr-1 and leakage class E by normalized leakage area of ASHRAE.

• 한국재료학회지
• /
• 제20권6호
• /
• pp.331-337
• /
• 2010

A highly porous Biphasic Calcium Phosphate (BCP) scaffold was fabricated by the sponge replica method with a microwave sintering technique. The BCP scaffold had interconnected pores ranging from $80\;{\mu}m$ to $1000\;{\mu}m$, which were similar to natural cancellous bone. To enhance the mechanical properties of the porous scaffold, infiltration of polycaprolactone (PCL) was employed. The microstructure of the BCP scaffold was optimized using various volume percentages of polymethylmethacrylate (PMMA) for the infiltration process. PCL successfully infiltrated into the hollow space of the strut formed after the removal of the polymer sponge throughout the degassing and high pressure steps. The microstructure and material properties of the BCP scaffold (i.e., pore size, morphology of infiltrated and coated PCL, compressive strength, and porosity) were evaluated. When a 30 vol% of PMMA was used, the PCL-BCP scaffold showed the highest compressive strength. The compressive strength values of the BCP and PCL-BCP scaffolds were approximately 1.3 and 2MPa, respectively. After the PCL infiltration process, the porosity of the PCL-BCP scaffold decreased slightly to 86%, whereas that of the BCP scaffold was 86%. The number of pores in the $10\;{\mu}m$ to $20\;{\mu}m$ rage, which represent the pore channel inside of the strut, significantly decreased. The in-vitro study confirmed that the PCL-infiltrated BCP scaffold showed comparable cell viability without any cytotoxic behavior.