• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3156-3158
• /
• 1999

Occupancy sensor is a efficient light control system which light on/off automatically and reduces the unnecessary power waste. From now the research on occupancy sensor is restricted to the selection of the appropriate place or sensor. Exist occupancy sensor changes the delay time by manually to the place or situation, so it is unreliable. The delay time can been changed by the average time of the occupied and the preset time, but it is not enough to reliable. In this paper, so to acquire the reliance the average and the standard deviation of the occupied time change the delay time automatically and protect the malfunction from the detector. And to embody it, AT89C52 microcontroller is adopted to the control circuit. It is verified by simulation and experiment results of output characteristic for randomized input.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.427-431
• /
• 1994

The objective of this paper is to provide an inventory control policy for the system that carries a single item with a multiple demand classes, when the demand is Poisson distributed random variable. The inventory control process includes the process of determining the reorder point, and the process of inventory control during the lead time. The goal of the optimization process is to achieve the service level of each demand class as well as the system-wide total service level at a preset desired service level while sustaining a minimum average inventory.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.409-419
• /
• 2014

This paper proposes a new temperature control algorithm and system configuration of the pTMS(personal Thermal Massage System). By controlling the pulse width of the PWM(Pulse Width Modulation), the temparature of the heating lamp can be controlled stably, which is indispensable to the massage function. This technology is also adapted to the 'thermal massage', 'thermal acupressure', 'thermal moxibustion' functions of medical equipments. The temperature could be set at between $40^{\circ}C{\sim}70^{\circ}C$ by increments of $5^{\circ}C$, the control could be made in real time by increments of $1^{\circ}C$, and the temperature is displayed on the monitor by triggering every 2 seconds. when the present temperature is equal to the preset temperature, the PWM signal is minimized, and when the present temperature is higher than the preset temperature, overheating is prevented by interrupting the PWM output signal. When the difference of temperature exceeds $4^{\circ}C$, the PWM control is maximized in order for the system to reach the target temperature within a short period of time.

• Journal of the Korean Home Economics Association
• /
• v.34 no.4
• /
• pp.309-326
• /
• 1996

The purpose of the study was to preset the relationships between role conflict and psychological/physical distress of dual/earner families in Pusan. the questionnaire was composed of socio-economic status, wives' work time, spouse's emotional support scale, husbands' housework participation, role conflict scale, psychologica/physical distress scale. The major findings were as follows : 1. The level of role conflict and psychological/physical distress were higher among wives than among husbands. 2. Role conflict were the most important factor affecting the level of psychological/physical distress directly. 3. Wives' psychological/physical distress were significantly affected by role conflict and socio-economic status directly. Wives' psychological/physical distress were affected by wives' work time, husbands' emotional support, husbands' housework participation indirectly. 4. Husbands' psychological distress was significantly affected by role conflict and husbands' housework participation directly. Husbands' physical distress was significantly affected by role conflict directly. Husbands' psychological/physical distress were affected by wives' work time, wives' emotional support indirectly.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.5
• /
• pp.90-96
• /
• 2001

This paper proposes the hybrid fuzzy control system for fast response time and precision control of auto-equipment which exist disturbance, parameter alteration of system, uncertainty. The purposed system, which provides the improvement in terms of the control region in high speed and precision control, first used the fuzzy control method for fast response time and when the error reaches the preset value, used the frequency-locked method for precision control. The theoretical and experimental studies have been carried out. The presented results from the above investigation show considerably improved performance in the position control of auto-equipment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.7
• /
• pp.29-36
• /
• 2013

In this paper, a new DC offset elimination filter is proposed for an accurate phasor extraction of fundamental frequency component. The proposed method can eliminate a DC offset component which is decayed exponentially. The proposed method uses only one cycle of data for phasor extraction computation, which does not need to preset the time constant of the DC offset component. Also, the other advantages of the proposed method is that gain compensation or phase compensation is not required after filtering. Simulations using ATP were performed to evaluate the performance of the proposed filter method, and the results were compared to the ones obtained by conventional methods.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.139-146
• /
• 1998

In this paper, we proposed the hybrid intelligent control method for fast response time and precise speed control of the AC Servo system. The proposed system first used the fuzzy-neural network control methods for fast response time and when the error reaches the preset value, used the PLL control method. In order to verify the advantage of he proposed method, the system is implemented. The results of the simulation and the experiment of speed control to use the 3-phase induction motor as a plant, we verified excellency of the proposed control method to compare with the conventional fuzzy-neural network control method.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.23-27
• /
• 2022

In this paper, we explore a new type of Android evasive malware based on the Sequential Probability Ratio Test (SPRT) that does not perform malicious task when it discerns that dynamic analyzer is input generator. More specifically, a new type of Android evasive malware leverages the intuition that dynamic analyzer provides as many inputs within a certain amount of time as possible to Android apps to be tested, while human users generally provide necessary inputs to Android apps to be used. Under this intuition, it harnesses the SPRT to discern whether dynamic analyzer runs in Android system or not in such a way that the number of inputs per time slot exceeding a preset threshold is regarded as evidence that inputs are provided by dynamic analyzer, expediting the SPRT to decide that dynamic analyzer operates in Android system and evasive malware does not carry out malicious task.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1534-1544
• /
• 2002

The TDCSA(Time Delay Control with Switching Action) method, which consists of Time Delay Control(TDC) and a switching action of sliding mode control(SMC), has been proposed as a promising technique in the robust control area, where the plant has unknown dynamics with parameter variations and substantial disturbances are preset. When TDCSA is applied to the plant with saturation nonlinearity, however, the so-called windup phenomena are observed to arise, causing excessive overshoot and instability. The integral element of TDCSA and the saturation element of a plant cause the windup phenomena. There are two integral effects in TDCSA. One is the integral effect occurred by time delay estimation of TDC. Other is the integral term of an integral sliding surface. In order to solve this problem, we have proposed an anti-windup scheme method for TDCSA. The stability of the overall system has been proved for a class of nonlinear system. Experiment results show that the proposed method overcomes the windup problem of the TDCSA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.291-298
• /
• 2017

In this paper, we derive the achievable degrees of freedom (DoF) for multiple-input multiple-output (MIMO) Z-interference channels (Z-IC) with reconfigurable antennas at the receivers, assuming that channel state information is not available at the transmitters. We propose a new linear scheme to align interfering signals and to decode desired signals through the designed preset mode switching pattern of reconfigurable antennas at the receivers. The key idea of our scheme is to use interfering signals as a side information at the interfered receiver by being silent at the corresponding transmitter during some time slots. Consequently, it is shown that the reconfigurable antennas at the receivers can bring a DoF gain if the number of preset modes is greater than the number of RF chains at the receivers.