• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.111-117
• /
• 2003

The paper presents an efficient algorithm based on ROAM for visualization of large scale terrain models in real-time. The quality and smoothness of the terrain data visualization within a 3D interactive environment is preserved, while the complexity of the algorithm is kept on a reasonable level. The main contribution of the paper is an introduction of a number of efficient techniques such as implicit coordinates method within the patch array representing ROAM and the viewpoint dependent triangle rendering method for dynamic level of detail (LOD) updates. In addition, the paper presents experimental comparison of a variety of culling techniques, including a newly introduced method: relational position culling. These techniques are incorporated in the visualization software, which allows to achieve more realistic terrain representation and the real-time level of detail reduction.

• 대한임베디드공학회논문지
• /
• 제8권4호
• /
• pp.219-225
• /
• 2013

This paper presents a method using Maximum-Likelihood Linear Regression (MLLR) adaptation to improve recognition performance of Limabeam algorithm for speech recognition using microphone array. From our investigation on Limabeam algorithm, we can see that the performance of filtering optimization depends strongly on the supporting optimal state sequence and this sequence is created by using Viterbi algorithm trained with HMM model. So we propose an approach using MLLR adaptation for the recognition of speech uttered in a new environment to obtain better optimal state sequence that support for the filtering parameters' optimal step. Experimental results show that the system embedded with MLLR adaptation presents the word correct recognition rate 2% higher than that of original calibrate Limabeam and also present 7% higher than that of Delay and Sum algorithm. The best recognition accuracy of 89.4% is obtained when we use 4 microphones with 5 utterances for adaptation.

• 전기전자학회논문지
• /
• 제3권2호
• /
• pp.285-294
• /
• 1999

본 논문에서는 다치논리 함수의 GRM(Generalized Reed-Huller)계수 생성 방법에 관하여 제안하였다 일반적인 GRM계수의 생성 방법은 Reed-Muller(RM) 전개식를 이용하여 극수 P=0의 RM계수를 구하고 이를 확장하여 모든 GRM계수를 구하는 방법을 사용한다. 본 논문에서 제안한 알고리즘은 모든 극수의 GRM계수를 구하지 않고 극수의 0의 개수를 순차적으로 비교해가며 GRM계수를 구하는 방식이다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제8권1호
• /
• pp.1-6
• /
• 2016

Keeping a system in stable state is one of the important issues of control theory. The main goal of our basic research is stability of unmanned aerial vehicle (quadrotor). This type of system uses a variety of sensors to stabilize. In control theory and automatic control system to stabilize any system it is need to apply feedback control based on information from sensors. Our aim is to provide balance based on the 3D spatial information in real time. We used PID control method for stabilization of a seesaw balancing system and the article presents our experimental results. This paper presents the possibility of balancing of seesaw system based on feedback information from stereo vision system only.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.31-39
• /
• 2013

This paper presents small signal stability analysis of a doubly fed induction generator (DFIG) based wind farm including series dynamic braking resistor (SDBR) connected at the stator side. A detailed mathematical model of wind turbine, DFIG machine and converters and SDBR is presented in this paper to derive the complete dynamic equations of the studied system. Small signal stability of this system is carried out by modal and sensitivity analysis, participation factors and eigenvalue analysis. Finally, this paper presents an analysis of the dynamic behavior of DFIG based wind farm under voltage dip condition with and without SDBR.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2179-2194
• /
• 2010

RAMS is becoming increasingly important in the decision making process for the rolling stock projects in order to improve competitiveness by reducing system life cycle cost while improving reliability, availability, maintainability and safety. In order to apply and manage RAMS of rolling stock systems effectively in the operator perspective, it is essential to integrate and control RAMS systematically from the early stage of rolling stock projects. RAMS management is to implement a RAMS system into rolling stock projects in terms of a rolling stock operator, which presents the strategic directions of RAMS policy, objectives, requirements, control, analysis, measurement and improvement throughout life cycle of rolling stock projects. This article presents a new framework of RAMS management that provides an effective and efficient way for managing RAMS in rolling stock systems in the railway industry.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.206-210
• /
• 2007

IEC 62278 presents a process to implement a consistent approach to the management of reliability for railway applications. A reliability program has to be established at the outset of a project in order to manage reliability activities effectively through the life cycle. The first step of the reliability program is to evaluate reliability requirements and targets based on the system specifications. The system specifications are derived from the customer's needs. The way in which the system requirements reflect the customer's needs is strongly dependent on the characteristics of the product. In general the customer of commercial trains presents the system requirements from their needs. However, the relation between the customer and supplier is equivocal for a project to development a prototype train, and the reliability program should be different from that of an usual commercial project. This paper deals with a process to manage reliability activities for the development of a protype train based on the experiences obtained from the development of the Korea High-Speed Train: Hanvit-350.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.308-322
• /
• 2020

This paper presents a conceptual design for a plant-wide autonomous operation system that uses artificial intelligence techniques. The autonomous operation system has the power and ability to perform the control functions needed for the emergency operation of a nuclear power plant (NPP) with reduced operator intervention. This paper discusses the emergency operation and level of automation in an NPP and presents the design requirements for an autonomous emergency operation system (A-EOS). Then, an architecture that consists of several modules is proposed, with descriptions of the functions. Finally, this paper introduces a prototype of the suggested autonomous system that integrates the authors' previous works.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.171-177
• /
• 2002

This paper presents the inertial force problem of ultrahigh-speed injection molding machine using linear motors, and presents its solutions. To make very thin products by injection molding, very high injection speed is required, and linear motors are used for this purpose. But direct drive by linear motors may cause brief nozzle separation from the sprue bushing because of the inertia force as large as the total output thrust of the linear motors, and this momentary separation can cause molten plastic leakage. In this paper, two solutions are proposed for this inertia force problem. One is the mechanical cancellation of the inertia force, and the other to increase the nozzle contact force. With the latter solution, the stationary platen bending worsens, so a new nozzle contact mechanism is also proposed, which can prevent the stationary platen bending.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.995-1000
• /
• 2000

In this paper. a mechanistic model is first constructed to predict three-dimensional cutting forces, and the uncut chip th thickness is calculated by following the movements of the position of the center of a cutter, which varies with the nominal feed, cutter deflection and runout. For general implementation to a real machining, this paper presents the method that determines constant cutting force coefficients, irrespective of the cutting conditions or cutter rotation angles. In addition, this study presents the approach which estimates runout-related parameters. the runout offset and its location angle, using only one measurement of cutting forces. For more accurate cutting force predictions, the size effect has to be considered in the cutting force model. In this paper, two approximate methods are suggested since the strict approach is practically impossible due to a measurement problem. The size effect is individually considered for narrow and wide cuts.