• 정보처리학회논문지B
• /
• 제9B권5호
• /
• pp.653-662
• /
• 2002

지문인식은 입력지문이 데이터베이스 내에 있는 특성인의 지문과 일치하는지 여부를 확인하는 것이다. 이를 위해 대형 지문 데이터베이스에서는 여러 가지 전처리 과정과 분류 및 매칭을 하고 소형 지문데이터 인식에서는 분류를 하지 않고 바로 매칭을 한다. 매칭 방법은 특징점 (단점, 분기점)에 기초한 매칭이 주를 이루고 있는데, 특징점에 기초한 매칭은 지문의 변환, 회전, 비선형 변형, 가짜 특징점 등이 발생하는 문제로 특징점 추출 및 특징점들 간의 정확한 매칭에 매우 복잡한 계산을 필요로 하고, 지문의 품질향상을 위해 많은 전처리 과정이 필요한 문제점이 있다. 본 논문에서는 이러한 문제점을 해결하기 위하여 지문인식에 특징점을 이용하지 않고, Gabor 필터에 지문을 통과시켜 얻은 지문의 융선에서 Gabor 특징값을 산출하여 이 특징값을 지문인식에 이용하는 간단한 새로운 방법을 제안하고 이 방법이 지문인식 실행에 가능성을 가지고 있음을 실험으로 증명하였다.

• 전자공학회논문지T
• /
• 제36T권4호
• /
• pp.24-29
• /
• 1999

In this paper, a simple contour-preserving filtering algorithm is proposed. The goal of the contour-preserving filtering method is to remove noise ad granularity as the preprocessing for the image segmentation procedure. Our method finds edge map and separates the image into the edge region and the non-edge region using this edge map. For the non-edge region, typical smoothing filters could be used to remove the noise and the small areas during the segmentation procedure. The result of simulation shows that our method is slightly better than the typical methods such as the median filtering and gradient inverse weighted filtering in the point of view of analysis of variance (ANOVA).

• 전기전자학회논문지
• /
• 제18권2호
• /
• pp.234-239
• /
• 2014

This paper proposes a new automatic detection method to inspect mura defects on display film surface using morphological image processing and labeling. This automatic detection method for mura defects on display films comprises 3 phases of preprocessing with morphological image processing, Gabor filtering, and labeling. Since distorted results could be obtained with the presence of non-uniform illumination, preprocessing step reduces illumination components using morphological image processing. In Gabor filtering, mura images are created with binary coded mura components using Gabor filters. Subsequently, labeling is a final phase of finding the mura defect area using the difference between large mura defects and values in the periphery. To evaluate the accuracy of the proposed detection method, detection rate was assessed by applying the method in 200 display film samples. As a result, the detection rate was high at about 95.5%. Moreover, the study was able to acquire reliable results using the Semu index for luminance mura in image quality inspection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.745-747
• /
• 1995

A new digital method of anti-aliasing is presented and is applied to the development of an electric vehicle controller. A layered processing structure and some finite-bit approximation technique, devised in this paper, are the key attributions to the design and implementation of the anti-aliasing filter. The performance of the implemented preprocessing system is tested with several experimental results.

• 반도체디스플레이기술학회지
• /
• 제10권3호
• /
• pp.99-103
• /
• 2011

The stereoscopic vision system is the algorithm to obtain the depth of target object of stereo vision image. This paper presents an efficient disparity matching method using blue edge filter and graph cut algorithm. We do recommend the use of the simple sobel edge operator. The application of B band sobel edge operator over image demonstrates result with somewhat noisy (distinct border). The basic technique is to construct a specialized graph for the energy function to be minimized such that the minimum cut on the graph also minimizes the energy (either globally or locally). This method has the advantage of saving a lot of data. We propose a preprocessing effective stereo matching method based on sobel algorithm which uses blue edge information and the graph cut, we could obtain effective depth map.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.920-923
• /
• 2003

An wearable electrocardiogram (ECG) monitoring system is a widely used non-invasive diagnostic tool for ambulatory patient who may be at risk from latent life-threatening cardiac abnormalities. In this paper, we have a portable ECG monitoring system with conductive fiber which was characterized by the small-size and the low power consumption. The system consists of conductive fibers, one-chip microcontroller, ECG preprocessing circuit, and monitoring software to be able to record and analyze in PC. ECG preprocessing circuit is made of pre-amplifier with gain of 10, band-pass filter with bandwidth of 0.5-120Hz and 2.5V offset circuit for A/D conversion. ECG signals obtained by sensor are included with corrupted noises such as a baseline wandering, 60 Hz power noise and interference noise by body movement. For cancellation corrupted noises in signals obtained by conductive fiber, we used the wavelet decomposition of wavelet transforms in MATLAB toolbox.

• 제어로봇시스템학회논문지
• /
• 제22권2호
• /
• pp.133-138
• /
• 2016

This paper describes the track initiation and target-tracking filter for ship tracking in a marine environment by using Light Detection And Ranging (LiDAR). LiDAR with three-dimensional scanning capability is more useful for target tracking in the short to medium range compared to RADAR. LiDAR has rotating multi-beams that return point clouds reflected from targets. Through preprocessing the cluster of the point cloud, the center point can be obtained from the cloud. Target tracking is carried out by using the center points of targets. The track of the target is initiated by investigating the normalized distance between the center points and connecting the points. The regular track obtained from the track initiation can be maintained by the target-tracking filter, which is commonly used in radar target tracking. The target-tracking filter is constructed to track a maneuvering target in a cluttered environment. The target-tracking algorithm including track initiation is experimentally evaluated in a sea-trial test with several boats.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권7호
• /
• pp.1773-1793
• /
• 2023

Automated machine learning, often referred to as "AutoML," is the process of automating the time-consuming and iterative procedures that are associated with the building of machine learning models. There have been significant contributions in this area across a number of different stages of accomplishing a data-mining task, including model selection, hyper-parameter optimization, and preprocessing method selection. Among them, preprocessing method selection is a relatively new and fast growing research area. The current work is focused on the recommendation of preprocessing methods, i.e., feature subset selection (FSS) algorithms. One limitation in the existing studies regarding FSS algorithm recommendation is the use of a single learner for meta-modeling, which restricts its capabilities in the metamodeling. Moreover, the meta-modeling in the existing studies is typically based on a single group of data characterization measures (DCMs). Nonetheless, there are a number of complementary DCM groups, and their combination will allow them to leverage their diversity, resulting in improved meta-modeling. This study aims to address these limitations by proposing an architecture for preprocess method selection that uses ensemble learning for meta-modeling, namely AutoFE-Sel. To evaluate the proposed method, we performed an extensive experimental evaluation involving 8 FSS algorithms, 3 groups of DCMs, and 125 datasets. Results show that the proposed method achieves better performance compared to three baseline methods. The proposed architecture can also be easily extended to other preprocessing method selections, e.g., noise-filter selection and imbalance handling method selection.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.100-105
• /
• 1998

Image processing was used to recognize parts at various disposition. Non-transpatent tachometer panel for automobile and semi-transparent panel have been used as test specimen. Laplacian filter and various threshold values have been applied for preprocessing and edge following algorithm has been applied. Series of length data between edges have been generated from each image and compared using cross correlation coefficient. The result using cross correlation coefficient. The result using both edge following and cross correlation coefficient was proven to be the best fit for the proposed parts.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.637-640
• /
• 1999

In this Paper we show the LCD simulator for defect inspection using image processing algorithm and neural network. The defect inspection algorithm of the LCD consists of preprocessing, feature extraction and defect classification. Preprocess removes noise from LCD image, using morphology operator and neural network is used for the defect classification. Sample images with scratch, pinhole, and spot from real LCD color filter image are used. The proposed algorithms show that defect detected and classified in the ratio of 92.3% and 94.6 respectively.