• Journal of Ginseng Research
• /
• v.40 no.3
• /
• pp.260-268
• /
• 2016

Background: During the aging process, skin shows visible changes, characterized by a loss of elasticity and the appearance of wrinkles due to reduced collagen production and decreased elasticity of elastin fibers. Panax ginseng Meyer has been used as a traditional medicine for various diseases due to its wide range of biological activities including skin protective effects. Ginsenosides are the main components responsible for the biological activities of ginseng. However, the protective activities of an enzymatic preparation of red ginseng against human skin aging have not been investigated. Methods: The efficacy of an enzyme-treated powder complex of red ginseng (BG11001) in preventing human skin aging was evaluated by oral administration to 78 randomized individuals. All patients were requested to take three daily capsules containing either 750 mg of BG11001 or a placebo vehicle for 24 wk; at the end of the testing period, skin roughness, elasticity, and skin water content were measured. Results: BG11001 significantly reduced the average roughness of eye wrinkles and the Global Photo Damage Score compared with the placebo, although there were no significant differences in arithmetic roughness average between the groups. In addition, gross elasticity and net elasticity values increased, and transepidermal water loss level decreased, indicating improved skin elasticity and moisture content. Conclusion: In conclusion, enzyme-treated red ginseng extract significantly improved eye wrinkle roughness, skin elasticity, and moisture content. Moreover, enzyme-treated red ginseng extract would be useful substance as a bio-health skin care product.

• Food Science and Preservation
• /
• v.22 no.6
• /
• pp.823-830
• /
• 2015

Physicochemical properties of five commercial rice products were investigated in order to select the appropriate rice varieties for the preparation of frozen fried rice. Among the evaluated rice varieties, Onnuri (16.06%) had the highest amylose content, while Beakjinju (11.83%) had the lowest. The water absorption index ranged from 1.45 to 1.65 g/g. Regarding the Hunter's color values, the L and a values of all rice varieties decreased while the b value increased with freezing-storage following the cooking process. The initial pasting temperature showed no significant differences among the five rice varieties. The highest viscosity (peak, trough, and final) and setback were found in the Sindongjin, while the lowest breakdown was found in the Baekjinju variety. Hardness, chewiness, and cohesiveness of all five cooked rice varieties decreased while their adhesiveness increased after freezing-storage. Under electron microscopy scanning, pores were observed inside the tissue of frozen cooked rices manufactured from Baekjinju and Hopum varieties, while substantially smooth tissue structure was observed in Sindognjin, Onnuri, and Ilmi rice varieties.

• Clean Technology
• /
• v.12 no.4
• /
• pp.191-197
• /
• 2006

Polymerization in supercritical carbon dioxide has been getting attention since it is easier to separate the remaining reactants from product polymer and since it is a cleaner process that produces neither wastewater nor air pollutants, compared to the conventional polymerization processes. In this study, poly(vinyl acetate) (PVAc) that is necessary in producing poly(vinyl alcohol) (PVA) with a lot of industrial applications was manufactured in the presence of supercritical carbon dioxide for the second time in the world. A poly(dimethylsiloxane)(PDMS)-derivative surfactant and three initiators were employed in the polymerization of vinyl acetate (VAc) at 338.15 K and 34.5 MPa. Investigation was carried out to find out the effect of the amounts and types of initiators and surfactants as well as the effect of reaction time on the yield and the molecular weight of PVAc. The weight average molecular weight (Mw) of PVAc was in the range of 60,000 ~ 140,000 g/mol, and the number average molecular weight was in the range of 30,000 ~ 70,000 g/mol. The yield of PVAc was spread over 10 ~ 80%, based on the amount of VAc monomer.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.505-511
• /
• 2006

We tried to prepare polystyrene composite particles containing carbon black by suspension polymerization with water as a reaction medium. Hydrophobic silica was selected as a stabilizer and oil-soluble azobisisobutyronitrile (AIBN), as an initiator. All polymerization reactions were carried out at a fixed temperature of $75^{\circ}C$. Stabilizer concentration was varied from $0.17{\sim}3.33wt%$ compared to water, where particles with $7.96{\mu}m$ in average diameter were obtained at 1.57 wt% of stabilizer. Increase in divinylbenzene concentration, as a crosslinking agent, from $0.1{\sim}1.0 wt%$ compared to monomer exhibited a large increase in average particle diameter Incorporation of 1wt% of carbon black compared to monomer produced an increase in average diameter It is speculated that viscosity lower than that necessary to induce even dispersion of carbon black particles led to poor dispersion, and as a result, large particles. For a styrene mixture containing 3 wt% carton black compared to monomer, enhanced dispersion due to an increase in carbon black concentration reduced average particle diameters. For styrene mixtures containing 1 and 3 wt% carbon black compared to monomer, preparticles before polymerization and polymer composite particles after polymerization showed a similar tendency towards particle formation. When carbon black concentration compared to monomer was increased to 5 and 7 wt%, styrene mixtures exhibited a large increase in viscosity and thus better dispersion of carbon black particles, which led to a decrease in preparticle diameters. However, these particles experienced agglomeration in the polymerization process, and polystyrene composite particles increased in average diameter.

• Korean Journal of Veterinary Research
• /
• v.30 no.2
• /
• pp.145-156
• /
• 1990

This study was purposed to produce blood typing reagents for classifing Cheju horse's blood group factors. The blood typing reagents were prepared by immunization of sixteen pairs out of fourty eight heads of Cheju horses, and seventeen different blood typing reagents (anti-$A_1$, A', H, Z, $ZZ_2$, C, J, K, $P_1$, Q, R, S, $T_1$, $N_1$, $U_2$, X and $E_2$) were prepared from equine isoimmunization. The result for the reagent production and the variation of agglutinin and hemolysin titer are as follows: 1. Anti-K, R, S, $N_1$, $U_2$ and X acted exclusively as hemolysins whereas anti-J, $P_1$, $T_1$ and $E_2$ acted exclusively as agglutinins, however, Anti-$A_1$, A', H, Z, $ZZ_2$, C and Q reacted both as hemolysins and agglutinins. 2. Among the antibodies in most of the reagents reacted both as hemolysins and agglutinins, But anti-$A_1$, H, Z, $ZZ_2$ and Q elevated higher agglutin titers than hemolysin titers, Anti-A' and anti-C elevated higher hemolysin titers than agglutinin titers. 3. Complex antibody $A_1U_2$ was adsorbed $U_2$ and unified to $A_1$, while complex antibody X $N_1$ went through an adsorption process and produced simple antibody X and $N_1$, respectively. 4. In the hemolytic reaction, anti-K and anti-R showed the highest titer, In the agglutination reaction, anti-Z and anti-$ZZ_2$ showed the highest titer. 5. In the case of No.138~No.140 horse immunization combination and No.133~No.146 horse immunization combination, Although production of complex antibody $CE_2$ and $JP_1$ were expected, only anti-$E_2$ and anti-J were produced respectively. 6. The degree of elevation of antibody titer was varied by the blood types and by the types of donor and recipient combination. The fast elevating types, slow elevating types and types that never elevate the antibody titer were identified.

• Membrane Journal
• /
• v.24 no.6
• /
• pp.453-462
• /
• 2014

Thin film composite (TFC) polyamide (PA) membranes were prepared on polyester (PET) nonwoven reinforced polysulfone supports for forward osmosis (FO) processes. PSF (polysulfone) supports were prepared via the phase inversion process from PSF casting solutions in dimethyl formamide (DMF) solvents (19 wt%) by using a PET nonwoven (thickness of $100{\mu}m$) as a mechanical reinforcing material for reverse osmosis (RO) membrane. The PSF support from 19 wt% of DMF/PSF casting solution showed sponge-like morphology and asymmetric internal structure. To reduce the internal concentration polarization in FO operation, thin ($20{\mu}m$ of thickness) nonwoven-supported PSF supports were prepared by using PSF/DMF casting solution (9~19 wt%). A desirable support structure with a highly porous sponge-like morphology were achieved from the thin nonwoven-supported PSF layer prepared with 9~12 wt% casting solution. A crosslinked aromatic polyamide layer was fabricated on top of each support to form a TFC PA membrane. The tested sample from 12 wt% of DMF/PSF casting solution presented outstanding FO performance, almost 5.5 times higher water flux (24.3 LMH) with low reverse salt flux (RDF, 1.5 GMH) compared to a thick nonwoven rainforced membrane (4.5 LMH of flux and 3.47 GMH of RSF). By reducing the thickness of the nonwoven and optimizing PSF concentration of casting solution, the morphology of the prepared membranes were changed from a dense structure to a porous sponge structure in the boundary area between nonwoven and PET support layer.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.2
• /
• pp.114-118
• /
• 2009

With the advance of industrialization and urbanization, a lot of waste has been discharged and treated by incineration. But fly and bottom ashes are generated in this process. In addition, the treatment method to recycle sewage sludge and melting slag is required to manage these wastes. The objective of this research was to prepare of multi-functional brick which were made from MSWI (Municipal solid wastes incinerator) fly ash, sewage sludge and slag. The bricks were made by mixing raw materials and then drying for 24 hours. Next, they were dried for 24 hours at $160^{\circ}C$ and fired for 2 hours. Calcination temperature was changed to discuss the effect of temperature from $1,080^{\circ}C$ to $1,130^{\circ}C$. Compressive strength of a brick was creased with the increase of temperature. To increase mixing ratio of fly ash and slag reduce the compressive strength the optimal condition was the mixing ratio of fly ash : melting slag : sewage sludge : clay as 10 : 20 : 5 : 65 and $1,150^{\circ}C$ of calcination temperature. Compressive strength was obtained as about 41 MPa at this condition.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.802-812
• /
• 2016

Silicone foam is very useful as flame resistant material for many industrial areas such as high performance gasketing, thermal shielding, vibration mounts, and press pads. A silicone foam was prepared through simultaneous crosslinking and foaming by hydrogen condensation reaction of a vinyl-containing polysiloxane (V-silicone) and a hydroxyl-containing polysiloxane (OH-silicone) with hydride containing polysiloxane (H-silicone) in the presence of platinum catalyst and imorganic filler at room temperature. This is more convenient process for silicone foam manufacturing than the conventional separated crosslinking and foaming systems. Funtionalized silicones we used in this experiment were consisted with a V-silicone containing 1,0 meq/g of vinyl groups and a viscosity of 20 Pa-s, an OH-silicone with 0.4 meq/g of hydroxyl groups and a viscosity from 50 Pa-s, and an H-silicone containing 7.5 meq/g of hydride groups and a viscosity of 0.06 Pa.s. The effects of compositions of functionalized silicones and additives, such as catalyst and filler on the structure and mechanical properties of silicone foam were studied. 0.5 wt% of Pt catalyst was enough to accelerate the foaming rate of silicone resins. The addition of OH-silicone with lower viscosity accelerates the initial foaming rate and decreases the foam density, but the addition of V-silicone with lower viscosity reduces the tensile strength as well as the elongation. The final foam density, tensile strength, and elogation of silicone foam prepared under the SF-3 condition increase maximum to $0.58g/cm^3$, $3,51kg_f/cm^2$, and 176 %, repectively. We found out the filler alumina also played an important role to improve the mechanical properties of silicone foams in our foaming system.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.1
• /
• pp.31-37
• /
• 2018

Oil/water (O/W) nanoemulsions are effective vehicles to change the permeability of the skin. In this study, we focused on the preparation and characterization of nanoemulsion which serve as colloidal carriers for the dermal application of ceramide IIIB (CIIIB) and stratum corneum (SC) lipids such as cholesterol, and palmitic acid. In order to optimize the nanoemulsions, emulsification process conditions were conducted with regard to droplet size, nanoemulsion stability, and solubility of CIIIB. A decrease in droplet size was observed through emulsification temperature of $80^{\circ}C$ and phase inversion composition (PIC) method. CIIIB has low solubility in oil and water. When the concentration of CIIIB was increased, the droplet size of nanoemulsion was increased. When Lipoid S75-3 was added to the oil phase, the solubility of CIIIB increased, indicating some interactions shown in DSC measurements. CIIIB and SC lipids could be successfully incorporated in nanoemulsions without crystallization or physical instability. In conclusion, a stable nanoemulsion containing the SC lipids could be effective as an efficient moisturizing system for skin.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.6
• /
• pp.520-526
• /
• 2007

The accuracy of model surgery is one of important factors which can influence the outcome of orthognathic surgery. To evaluate the accuracy of digitalized model surgery, we tried the model surgery on a software after transferring the mounted model block into a digital model, and compared the results with that of classical manual model surgery. We could get the following results, which can be used as good baseline analysis for the clinical application. 1. We made the 3D scanning of dental model blocks, and mounted on a software. And we performed the model surgery according to the previously arranged surgical plans, and let the rapid prototyping machine produce the surgical wafer. All through these process, we could confirm that the digital model surgery is feasible without difficulties. 2. The digital model surgery group (Group 2) showed a mean error of $0.0{\sim}0.1mm$ for moving the maxillary model block to the target position. And Group 1, which was done by manual model surgery, presented a mean error of $0.1{\sim}1.2mm$, which is definitely greater than those of Group 2. 3. Remounted maxillary model block with the wafers produced by digital model surgery from Group 2 showed the less mean error (0.2 to 0.4 mm) than that produced by manual model surgery in Group 1 (0.3 to 1.4 mm). From these results, we could confirm that the digital model surgery in Group 2 presented less error than manual model surgery of Group 1. And the model surgery by digital manipulation is expected to have less influence from the individual variation or degree of expertness. So the increased accuracy and enhanced manipulability will serve the digital model surgery as the good candidate for the improvement and replacement of the classical model surgery, if careful preparation works for the clinical adjustment is accompanied.