• Environmental Engineering Research
• /
• 제11권1호
• /
• pp.45-53
• /
• 2006

Conventional coagulation is still the main treatment process for algae removal in water treatment. The coagulation efficiency can be significantly improved by the preoxidation of algae-containing water. Jar test was conducted to determine the optimal condition for the removal of diatoms, especially Cyclotella sp. by preoxidation and the subsequent coagulation. The effects of various concentration of PAC (Polyaluminum chloride) on coagulation with and without preoxidation using chlorine or potassium permanganate at different pHs (7.7 and 9.0) were evaluated. At pH 7.7, preoxidation with 2ppm $Cl_2$ followed by coagulation with 7.5 ppm PAC coagulant could reduce Cyclotella sp. concentration by 86%. At pH 9.0, preoxidation with 1 mg $KMnO_4/L$ followed by coagulation with 12.5 ppm PAC coagulant reduced Cyclotella sp. concentration by 85%. Non-linear regression was applied to determine the optimal condition. At pH 7.7 and 9.0, R was over 0.9, respectively. The pH of algal blooming water is over 9.0. Algae (diatom; Cyelotella sp.) can be controlled in the following ways: preoxidation with 1 mg $KMnO_4/L$ followed by coagulation with 12.5 ppm PAC coagulant can remove 80% algae from water. If water pH is adjusted to 7.7, it was expected that less amount of coagulant (7.5 or 10 mg PAC /L) after preoxidation ($Cl_2$ 2 ppm or $KMnO_4$ 0.33, 1 ppm) would be needed to achieve similar level of algae removal. The oxidation with 0.33ppm $KMnO_4$ followed by coagulation with 7.5 ppm PAC coagulant was preferable due to cost-effectiveness of treatment condition and color problem after treatment.

• 한국표면공학회지
• /
• 제46권6호
• /
• pp.264-270
• /
• 2013

Effects of preoxidation on high temperature wear of piercing plug tool steel sliding against SA210C steel used for production of seamless tube have been studied using a pin-on-disc CETR tribometer, under applied normal load of 20 N at $900^{\circ}C$ in air. It was found in the preoxidized pin specimens of piercing plug tool steel that the coefficient of friction decreased to about 0.4 at an initial stage followed by showing nearly constant value of about 0.4 during high temperature wear testing. On the other hand, it was also found in the pin specimens without preoxidation that the coefficient of friction increased and fluctuated, ranging from about 0.3 to 0.6 during the tests until the running period of about 800 sec. The compact and continuous Fe-oxide layer was formed on the contact surface of the preoxidized pin specimens after high temperature wear testing followed by penetrating along the grain boundaries of coarse ferrite in the decarburized region beneath the oxide layer due to the lower hardness of the region.

• 한국염색가공학회지
• /
• 제4권4호
• /
• pp.90-96
• /
• 1992

In the PAN-based ACF manufacturing system stabilization step was improved with chemical treatment (preoxidation) in order to yield higher carbon content and to avoid excessive fragmentation during carbonization and activation process. The optimal condition of preoxidation was at 18$0^{\circ}C$ for 4 minutes in sodium glyceroxide in glycerine (concentration of NaOH was 0.02 meq/g). To investigate low temperature stabilization effect, preoxidized PAN fiber heated 22$0^{\circ}C$ to 26$0^{\circ}C$ as a function of treatment time and oxidative gas atmosphere, and analysed by infrared spectrum and TGA. As a results of IR and TGA, it was clear that impregnated[preoxidative] PAN had 14% higher residual than untreated PAN at 100$0^{\circ}C$ and the optimal condition of stabilization was at 26$0^{\circ}C$ for 3.5 hours within $N_2$ atmosphere.

• 대한치과보철학회지
• /
• 제27권2호
• /
• pp.219-248
• /
• 1989

The purposes of this study were to analyze the microstructural and compositional changes of metal surfaces following different conditions of preoxidizing heat treatment, to investigate the composition of metal oxides, and to evaluate the effect of preoxidation and removal of surface oxides on microstructure and diffusion profiles. The techniques of EDAX (energy-dispersive analysis of x-ray), ESCA (electron spectroscopy for chemical analysis), and EPMA (electron probe micro analysis) were used, along with SEM (scanning electron microscopy). The obtained results were as follows : 1. A surface of the specimen became rough and the amount of the metal oxides increased with increasing the heat treatment time and temperature and the partial pressure of oxygen. 2. At an air pressure of 28' vacuum, the higher the temperature and the longer the time of preoxidation, the higher Ni concentration was detected. 3. Cr concentration in the specimen heat treated with air was higher than that of with vacuum. 4. The oxides in the specimens were mainly composed of Ni and Cr oxides. On the globular growth particles, significant rises in Al concentration of Rexillium III and Ti concentration of Verabond were noted. 5. Atomic diffusion occurred at the ceramic-metal interface, furthermore the amount of the flux was increased with preoxidation heat treatment.

• Nuclear Engineering and Technology
• /
• 제19권2호
• /
• pp.122-129
• /
• 1987

핵연료 피복재 (Zircaloy-4)에 생기는 얇은 산화층의 두께에 따른 고온에서의 산화 거동을 관찰하기 위하여 실험과 수치 계산을 수행하였다. 산화 실험은 수중기와 물의 혼합 분위기에서 지르칼로이-4판재 시편을 $650^{\circ}C$에서 600초, 1,800초 동안 산화시켜서 산화층을 형성시킨 후 $700^{\circ}C$ 와 85$0^{\circ}C$ 사이의 온도에서 산화 거동을 관찰하였다. 기산화층의 두께가 두꺼울수록 고온에서의 산화율은 as-received cladding의 경우보다 낮았다. 기산화층이 형성된 시편에서는 산화율 천이 영역이 나타났으며 이 영역은 산화 온도가 올라감에 따라 점차로 소멸되었다. 기산화층의 영향은 낮은 온도($700^{\circ}C$)에서 가장 뚜렷하게 나타났다. 수치 계산 결과에 의하면, 산화층 증가율과 무게 증가는 실험 결과와 비슷하게 기산화층의 두께에 영향을 받았다.

• 한국생명과학회:학술대회논문집
• /
• 한국생명과학회 2008년도 제49회 학술심포지움 및 국제학술대회
• /
• pp.46.1-46.1
• /
• 2008

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.70-78
• /
• 1983

This paper discusses the application of Si-Borosilicate glass sealing to a new sealing method which utilizes a large electrostatic field to pormote bound formation at relatively low temperature. Bonding mechanism and the effect of bonding time bonding temperature glass thickness and surface roughness on the bond strength were investigated. Application of a de voltage across bonded specimen gradually produced a layer of glass adjacent silicon which was depleted of mobile ions. As a consequence a n increasingly larger fraction of the applied voltage appeared across the depleted region and very large electric field resulted This field accompanyed by large electrostatic force acted as driving force the of strong bond. And stronger bond was formed with increasing bonding time and temperature. A low temperature preoxidation is advantageous for the Si surface having a rougher surface finish that 1 microinch.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.147-150
• /
• 1988

Since the integration level of VLSI circuits progresses very quickly, a highly reliable thin $SiO_2$ film is required to fabricate a small-geometry MOS device. In the present study we have attempted to eliminate the failure-causing defects that develop in thin oxide films during the oxidation step by performing a long-time preoxidation and postoxidation annealing. The TDDB test and the copper decoration method were used to calculate the oxide defects density of MOS device. The dielectric reliability of high-quality thin oxides have been studied by using the time-zero-dielectric-breakdown (ramp-voltage-stressed I-V) and time-dependent-dielectric -breakdown (Constant-stressed I-V) tests. Failure times against temperature and electric field are examined and acceleration factors are abtained for each parameter. Based on the data obtained, breakdown wearout limitation for thin oxide films is estimated.

• 폴리머
• /
• 제26권4호
• /
• pp.468-476
• /
• 2002

순수한 PAN 섬유의 예비산화와 가수분해의 과정을 통하여 제조된 oxy-PAN은 염기와 산용액에 담그었을 때 신장과 수축 거동을 보임이 알려져 있다. 본 연구에서는, 염기 (NaOH) 용매에서 약 30%의 신장과 산 (HCl) 용매에서 30∼50%의 수축 거동을 관찰하였다. 기계적 특성에 대한 실험에서, oxy-PAN 섬유가 수축되었을 때 향상된 기계적 특성을 나타내었다. 이러한 거동과 기계적 특성은 인체의 근육과 선형 구동체의 그것들과 유사하였다. NaOH와 HCl 용액에서 oxy-PAN 섬유의 길이가 변화하는 중요한 요인으로는 친수화 또는 소수화 구조의 전환에 의한 영향이다. 다른 요인으로는 oxy-PAN 섬유와 용액간의 이온과 물의 교환, 이온의 농도차에 의한 삼투압 등이 영향을 준다. Oxy-PAN 섬유의 신장 및 수축과 기계적 특성에 영향을 미치는 여러 가지 요인들을 규명하기 위한 보다 많은 연구가 필요하지만, 본 연구실에서 제조된 oxy-PAN 섬유가 인공 근육 및 선형 구동체로 적용될 수 있는 충분한 가능성이 있음을 제시한다.

• 한국식품과학회지
• /
• 제38권5호
• /
• pp.668-673
• /
• 2006

본 실험은 오가피열수추출물이 알레르기성 접촉 피부염을 유발한 흰쥐의 체내 지질 조성, 항산화활성, serum Ig E 수준과 표피회복능에 미치는 영향을 조사하기 위해 행해진 것으로 1-chloro-2,4-dinitrochlorobenzene(DNCB: 2.5% DNCB 1 mL로 감작, 4일 경과 후 1% ONCB 1 mL로 유발) 처리로 알레르기성 접촉 피부염이 유발된 Sprague-Dawley 수컷 흰쥐에 오가피열수추출물 (100 mg/체중 kg/day)을 경구투여 한 다음 혈장과 간의 지질조성과 항산화활성, 혈중 Ig E 농도, 표피두께변화를 관찰하여 다음과 같은 결과를 얻었다. 혈장의 total cholesterol과 LDL-cholesterol은 정상군에 비해 ACFG군에서 유의적으로 감소하여(p<0.05) 오가피 열수추출물이 지질개선에 효과적인 것으로 나타났다. 혈장과 간의 지질과산화물 함량은 정상군에 비해 CG군과 ACFG군에서 지질과산화물 함량이 유의하게 높았으며(p<0.05), ACFG군이 CG군에 비해 과산화물 함량이 감소하는 경향을 보였다. 간의 SOD효소활성은 CG군에서 정상군에 비해 유의하게 증가하였으며(p<0.05), ACFG군에서 정상군의 수준으로 유의하게 감소하였다(p<0.05). Serum 중 Ig E 수준은 정상군에 비해 CG군에서 유의하게 증가하였으며(p<0.05), ACFG군에서 CG군에 비해 정상군의 수준으로 유의하게 감소하였다(p<0.05). 표피두께는 정상군에 비해 CG군에서 표피두께가 유의적으로 증가하였으며(p< 0.05), ACFG 군에서 CG군에 비해 유의하게 감소하였다(p<0.05). 혈장과 간의 지질과산화물 함량과 표피두께의 상관계수가 각각 r=0.644(p<0.01), r=0.516(p<0.05) 로 비교적 높은 정의 상관관계를 보였다. 이상의 결과로 미루어 볼 때 정상 흰쥐에 비하여 DNCB에 의해 유도된 접촉성 피부염을 가진 흰쥐의 혈장과 간의 지질과산화물 생성이 증가되며 이로 인해 표피의 두께가 증가하고, SOD 활성이 증가하는 것으로 나타났다. 오가피열수추출물의 섭취로 알레르기성 접촉피부염으로 유발된 흰쥐의 체내 지질과산화물 생성 억제, Ig E 농도감소, 표피두께 감소되는 효과가 나타났다.