• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.1 s.47
• /
• pp.41-49
• /
• 2006

Through the 1982 Urahawa-ohi and the 1995 Kobe earthquakes, a number of bridge columns were observed to develop a flexural-shear failure due to the bond slip as a consequence of premature termination of the column longitudinal reinforcement. Because the seismic behavior of RC bridge piers is largely dependent on the performance of the plastic hinge legion of RC bridge piers, it is desirable that the seismic capacity of RC bridge pier is to evaluate as a curvature ductility. The provision for the lap splice of longitudinal steel was not specified in KHBDS(Korea Highway Bridge Design Specification) before the implementation of 1992 seismic design code, but the lap splice of not more than 50%, longitudinal reinforcement was newly allowed in the 2005 version of the KHBDS. The objective of this research is to investigate the distribution and ductility of the curvature of RC bridge column with the lap splice of longitudinal reinforcement in the plastic hinge legion. Six (6) specimens were made in 600 mm diameter with an aspect ratio of 2.5 or 3.5. These piers were cyclically subjected to the quasi-static loads with the uniform axial load of $P=0.1f_{ck}A_g$. According to the slip failure of longitudinal steels of the lap spliced specimen by cyclic loads, the curvatures of the lower and upper parts of the lap spliced region were bigger and smaller than the corresponding paris of the specimen without a lap splice, respectively. Therefore, the damage of the lap spliced test column was concentrated almost on the lower part of the lap spliced region, that appeared io be failed in flexure.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.993-1000
• /
• 2005

Various types of FRP materials have been applied for structural strengthening of RC beams in various forms. When CFRP plates are used, a premature failure used to occur before enough strengthening effect appears. This is primarily due to the rip-off of CFRP Plate attached on RC beams. Despite of numerous studies on the rip-off failure of externally strengthened RC beams, its failure mechanism is not definitely clarified yet. Investigations from literatures have shown that the rip-off failure is dependant on the vertical and shear stresses at the level of main reinforcements in RC beams. This study suggests an analytical model to Investigate the rip-off failure load based on the stress states at the level of main reinforcements. The proposed model is relatively simple and produces very comparable results to the test data. It is believed that the proposed model can be successfully used to provide more information on the rip-off failure mechanisms and its prevention.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.793-796
• /
• 2008

Recently early strength concrete has been required for economical assurance and the prevention of frost damage in winter through air reduction in construction of concrete structures. This study presented the optimum condition revealing compressive strength 5MPa which has the possibility of removal of form in 24 hours, and researched the changes of unit weight of cement types of high early strength AE water reducing agents, characteristic of compressive strength expression as cure temperature conditions and slump or airspace. Test results showed at $15^{\circ}C$ with compressive strength of 5MPa that premature removal of form was possible in case of using highly early strength PC water reducing agent with unit weight of cement 360 ; 22hours faster than 10, unit weight 360 ; 20hours faster than 7, unit weight 390 ; 18 hours faster than 4 comparing with OP water reducing agent. And at $5^{\circ}C$ in case of using highly early strength PC water reducing agent with unit weight of cement 330 ; 32hours faster than 10, unit weight 360 ; 30hours faster than 7, unit weight390 ; 27hours faster than 4 comparing with OP water reducing agent. Therefore as the temperature rises $10^{\circ}C$, compressive strength of 5MPa reaching hour shortens 10 hours.

• Advances in pediatric surgery
• /
• v.8 no.2
• /
• pp.126-132
• /
• 2002

Inguinal hernia is a major surgical disease in pediatric surgery, occurring in 3.5% to 5% of all mature newborns and 9% to 11% of all premature babies. The objective of this study is to analyze the predisposing factors in association with recurrences of inguinal hernias in infants and children. In the period from January 1995 to September 2001, 1,575 infants and children who had primary inguinal hernias or recurrent inguinal hernias operated on at the Department of Pediatric Surgery at Seoul National University Hospital were evaluated retrospectively. We evaluated the data by medical records and by telephone interview. The sex, age, location of hernia, comorbidity, prematurity, incarceration, interval to operation after incarceration, postoperative complications were analyzed as predisposing factors in associated with hernia recurrence. Operative findings of recurrent inguinal hernia were reviewed. The data were statistically analyzed with Pearson Chi-Square test and Fisher-exact test. A total of eighteen (1.14%) out of 1,575 patients underwent an operation due to recurrent inguinal hernia. In 5 (27.8%) out of 18 recurred patients, institution of the primary herniorrhaphy was our hospital and in the other 13 (72.2%) was outside hospital. No impact on the development of recurrences was seen for sex, age, interval to operation after incarceration, and postoperative complications. The significant predisposing factors of recurrent inguinal hernias were left inguinal hernias (p=0.002), comorbidity (p=0.002), prematurity (p=0.006), incarceration (p=0.017) and technical error of first herniorrhaphy. We expect that knowledge for predisposing factors of recurrent inguinal hernias and experienced skill of pediatric surgeons will decrease recurrence rate in primary inguinal hernia.

• Advances in pediatric surgery
• /
• v.9 no.1
• /
• pp.19-23
• /
• 2003

Necrotizing Enterocolitis (NEC) is usually a disease of premature infants, but occasionally it affects the term neonate. Twenty-five infants with NEC were treated at Asan Medical Center between January 2000 and December 2002, and 13 of them were term infants. In each case, the diagnosis of NEC was established by a clinical illness fulfilling the Bell's stage II or III NEC as modified by Walsh or by surgical findings. There were six males and seven females. The birth weight was from 1,960 to 3,700 g. The age at diagnosis was from 1 to 40 days. Four patients had congenital heart disease: one of who had hypothyroidism and cleft palate. Abdominal distension was present in all, and bloody stools in four. One patient had history of hypoglycemia, three had Rota viral infection. Eight patients had leucopoenia (<$5.0{\times}10^9/L$), seven had thrombocytopenia (<$100{\times}10^9/L$), and three severe thrombocytopenia (<$50{\times}10^9/L$). Laparotomy was required in 10 of the 13 patients. Indications for operation in the acute phase were failure to respond to aggressive medical therapy in five, and perforation in three patients. There were two late phase operations for intestinal stricture and fistula. There were no operative complications. Ten of thirteen patients survived (76.9%). Two patients died of septic complication. There was a delayed death due to heart failure. There was a significant difference in survival according to platelet count ($50{\times}10^9/L$) (p<0.05). Congenital heart disease and Rota viral infection are associated with NEC in term infants and thrombocytopenia and leucopoenia may be surgical indications.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.3
• /
• pp.438-443
• /
• 2000

Ectopic eruption should be understood as a change in the course of the normal eruption path of a dental bud at any moment its origin. An example of this alteration is the dental transposition, a rare and more specific dental anomaly that may be defined as a change of position between two teeth. This case shows ectopic eruption of transposed mandibular lateral incisor beneath primary first molar at the first transitional period of the mixed dentition The crown of the lateral incisor has tipped distally, compelling root resorption and exfoliation of the adjacent primary cuspid and primary first molar. The reason for such eruption is not clearly understood, but it may involve; (1)trauma history, (2)prolonged retention of the deciduous teeth, (3)premature exfoliation of the deciduous teeth, and (4)genetic factor. Treatment is divided into interceptive and definitive treatment. Ectopically erupting mandibular incisor tends to become transposed with the adjacent cuspid and thus seems to warrant early orthodontic intervention. Early treatment may obviate later extraction or transposition of the incisor and canine in the permanent dentition. Timing is an important factor to be considered regarding in the correction of the lateral incisor transposition. This case advocates treatment with an active orthodontic therapy at the early stage of the mixed dentiton, before the eruption of the permanent cuspid.

• Journal of the Korean Chemical Society
• /
• v.40 no.2
• /
• pp.109-116
• /
• 1996

A matrix modification was studied for the determination of trace germanium in mineral waters by electrothermal atomic absorption spectrophotometry (ET-AAS). For this, the type and quantity of modifier as well as the use of auxiliary modifier were investigated to realize the efficient modification. Germanium suffers from low sensitivity and poor reproducibility in ET-AAS determination because of the premature loss of germanium via volatile germanium monoxide formation when heated in the presence of carbon. Therefore, the addition of a matrix modifier is necessary to stablize the germanium, thermally and chemically. By the addition of palladium (10 ${\mu}g/mL)$ as a single modifier to the sample containing 500 ng/mL germanium, the charring temperature could be raised from 800 to $1000^{\circ}C$, and its absorbance was also increased, but the atomization temperature was not raised. In this case, the absorbance of germanium was not changed in the range of 10∼70 ${\mu}g/mL$ of palladium added. On the other hand, it was considered that the use of a mixed modifier could modifiy the matrix more effectively than with a single modifier. The best results were obtained by using 1% ammonium hydroxide as an auxiliary modifier together with 10 ${\mu}g/mL$ palladium. The charring temperature could be raised from 800 to $1100^{\circ}C$, without any change of the atomization temperature. With above optimum conditions, the trace amount of germanium in several mineral waters were determined by a calibration curve method, and good recoveries of more than 95% were also obtained in the samples in which a given amount of germanium was spiked. The detection limit of this method was about 6.9 ng/mL.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.3
• /
• pp.1-12
• /
• 2004

Due to the 1989 Loma Prieta, 1995 Hyogoken Nambu earthquakes, etc, a number of bridge columns  were collapsed in flexure-shear failures as a consequence of the premature termination of the column longitudinal reinforcement. Nevertheless, previous researches for the performance of bridge columns were concentrated on the flexural failure mode. It is well understood that the seismic behaviour of RC bridge piers was dependent on the performance of the plastic hinge of RC bridge piers, the ductility of which was desirable to be computed on the basis of the curvature. Experimental investigation was made to evaluate the variation of the curvature of the plastic hinge  region for the seismic performance of earthquake-damaged RC columns in flexure-shear failure mode. Seven test specimens in the aspect ratio of 2.5 were made with test parameters: confinement ratios, lap splices, and retrofitting FRP materials. They were damaged under series of artificial earthquakes that could be compatible in Korean peninsula. Directly after the pseudo-dynamic test, damaged columns were retested under inelastic reversal cyclic loading under a constant axial load, $P=0.1f_{ck}A_g$. Residual seismic capacity of damaged specimens was evaluated by analzying the moment-curvature hysteresis and the curvature ductility. Test results show that the biggest curvature was developed around 15cm above the footing, which induced the column failure. It was observed that RC bridge specimens with lap-spliced longitudinal steels appeared to fail at low curvature ductility but significant improvement was made in the curvature ductility of RC specimens with FRP straps wrapped around the plastic hinge region. Based on the experimental variation of the curvature of RC specimens, new equivalent length of the plastic hinge region was proposed by considering the lateral confinement in this study. The analytical and experimental relationship between the displacement and the curvature ductility were compared based on this proposal, which gave excellent result.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.237-245
• /
• 2011

Asphalt Plug Joint(APJ) is a new type of expansion joint that it's application are increased in USA as well as several European countries. APJ's' advantages are cheap construction and maintenance costs, and simple construction and securing of excellent flatness. However, APJ's usability is hindered because it showed a problem of premature failure. Research for solving this problem has been progressed, and FEM analysis among existing researches was peformed. However, the behavior of APJ was insufficiently analyzed and the reliability of the analysis was much low, since the material showing complicated behavior was oversimplified, Therefore, a material model was proposed and its effectiveness was confirmed by comparing it with actual behavior in order to improve the reliability of FEM analysis in this paper. ABAQUS program was used for FEM analysis, and an elasto-plastic model and a viscous-plastic model as the material model of APJ were suggested on the base of experiment results of APJ material performed by Bramel et al. The elasto-plastic model was defined by time-independent analysis since it didn't consider time and strain rate, and the viscous-plastic model was defined by time-dependent analysis since it considered. Influence of various elements affecting the behavior of APJ was investigated, and it was confirmed that the time-dependent analysis showed better result closed to actual behavior than the time-independent analysis.

• Journal of Yeungnam Medical Science
• /
• v.18 no.2
• /
• pp.287-292
• /
• 2001

Background: To determine mean clitoral and glans size of Korean female newborn. Materials and Methods: The size of glans and clitoris of 68 Korean female newborns born at Yeungnam University Medical Center were measured from May in 1999 to August in 1999. Results: The mean size of the 68 newborns were $2.38{\pm}1.14$ mm in glans length, $2.55{\pm}1.48$ mm in glans width and $4.66{\pm}1.93$ mm in clitoral length. In the premature infants the mean clitoral size was $1.92{\pm}1.58$ mm in glans length, $1.78{\pm}1.24$ mm in glans width and $3.86{\pm}2.16$ mm in clitoral length. In the full term infants $2.53{\pm}1.12$ mm in glans length, $2.75{\pm}1.58$ mm in glans width and $4.94{\pm}1.89$ mm in clitoral length. In low birth weight infants clitoral size was measured $1.55{\pm}1.10$ mm in glans length, $2.04{\pm}2.03$ mm in glans width and $3.29{\pm}1.87$ mm in clitoral length. In normal birth weight infants $2.53{\pm}1.13$ mm in glans length, $2.68{\pm}1.48$ mm in glans width and $4.92{\pm}1.91$ mm in clitoral length. In high birth weight infants $1.54{\pm}0.50$ mm in glans length, $1.63{\pm}0.53$ mm in glans width and $3.18{\pm}1.04$ mm in clitoral length. Conclusion: There was no significant correlation between gestational age and clitoral size or glans size, but significant negative correlation was found between birth weight and clitoral size or glans size.