• 한국기계연구소 소보
• /
• 통권14호
• /
• pp.111-119
• /
• 1985

A review on the design analysis of an axial-flow turbine is presented. Followed by a brief introduction to the fundamentals on an axial-flow turbine, a design procedure is described with a sample design of one for a small turbo-jet engine. Design procedure is composed of two parts: one-dimensional analysis of three-dimensional effects based on radial equilibrium theory. The method described herein is so simple and rapid that it can be applied to the preliminary design analysis of turbo-machinery equipped with axial-flow turbines.

• 국제초고층학회논문집
• /
• 제6권3호
• /
• pp.279-284
• /
• 2017

The purpose of structural health monitoring is to evaluate structural behavior due to various external loads through installation of appropriate measurement. Accordingly, a guideline for monitoring standards is necessary to evaluate the safety and performance of a structure. This paper introduces preliminary design of SHM for high-rise buildings, which is the stage creating a guideline. As for preliminary design of SHM, first step is to calculate the displacement and member force through structural analysis. After that, limitations or qualifications are proposed for management. Secondly, based on the results from first step, issues related monitoring such as monitoring method, measurement type, or installation location are determined. This method leads building managers to reasonably define the structural safety over the whole life cycle. Furthermore, this experience contributes to development of SHM forward and it is expected to be useful for other types of structures as well such as spatial structures or irregular buildings.

• 대한기계학회논문집B
• /
• 제26권1호
• /
• pp.55-65
• /
• 2002

In this study, the procedures for the preliminary design of the turbo-shaft engine for the light multi-purpose helicopter are established. The engine specifications are determined through the performance analysis on the on-design and off-design conditions by the use of simulation program. In addition, the effect of humidity on the engine performance is examined by considering the change of the gas properties and characteristic maps due to moisture contents. The calculation results show that the engine power is reduced by the existence of moisture in working fluid.

• 대한조선학회지
• /
• 제10권1호
• /
• pp.1-14
• /
• 1973

In the Department of Naval Architecture, Seoul National University, the development of computer programs for the computer-aided ship design sponsored by the Ministry of Science and Technology has been begun. The project is to be accomplished as a four-year plan, and the results of the works of the first year, preliminary design of dry-cargo ships based on an optimization technique and some fundamental calculations accompanied with the basic design of ships such as calculations of displacement, hydrostatic characteristics of hull forms, stability, floodable length, load line and longitudinal section modulus, are given in the Report R-72-9[9] published by the sopnsor for the public interests. In this paper, the philosophy and methodological principles with which the preliminary design program given in Appendix II was developed are summerized.

• Steel and Composite Structures
• /
• 제1권4호
• /
• pp.377-392
• /
• 2001

The response of multi-story building structures to lateral loads, mainly due to earthquake and wind, is investigated for preliminary design purposes. Emphasis is placed on structural systems consisting of rigid and braced steel frames. An attempt to gain a qualitative understanding of the influence of bending and shear stiffness distribution on the deformations of such structures is made. This is achieved by modeling the structure with a stiffness equivalent Timoshenko beam. It is observed that the conventional stiffness distribution, dictated by strength constraints, may not be the best to satisfy deflection criteria. This is particularly the case for slender structural systems with prevailing bending deformations, such as flexible braced frames. This suggests that a new approach to the design of such frames may be appropriate when serviceability governs. A pertinent strategy for preliminary design purposes is proposed.

• 대한조선학회지
• /
• 제24권2호
• /
• pp.20-28
• /
• 1987

In general, preliminary hull form design is performed by changing a parent hull form using a computer to satisfy given requirements, e.g., principal dimensions, displacement, $L_{CB}$, and etc. Principal dimensions, $C_b,\;L_{CB}$ and midship sections are the only parameters to be modified in the traditional hull form variation methods available for preliminary design. In this paper, a method is presented in which local cross sections as well as principal dimensions and midship sections are modified according to design requirements. The method gives hydrostatic curves of modified hull form simultaneously. An optimization technique to satisfy the constraints of hydrostatic characteristics such as maximizing KM as a design requirement is also considered.

• 한국전산구조공학회논문집
• /
• 제24권3호
• /
• pp.283-288
• /
• 2011

내진설계에서 설계자가 제시해야 하는 사항은 구조물의 항복과정이 원칙적으로 연성파괴메카니즘으로 구성되는 것이다. 일반교량의 연성파괴메카니즘은 연결부분과 교각기둥 두 구조부재 중 교각기둥이 먼저 항복하도록 설계되어야 한다. 그러나 불필요하게 강성이 큰 하부구조가 사용되는 국내의 설계관행에 의해 지진하중은 크게 발생하게 되므로 연성파괴메카니즘을 확보하기가 어렵다. 이러한 문제는 내진설계가 기본설계 단계에서 수행되지 않아 발생한다. 이 연구에서는 일반교량을 해석대상 교량으로 선정하고 기본설계 단계에서 연결부분과 하부구조의 설계강도를 결정하는 내진설계를 수행하여, 이러한 설계방식으로 타설계에서 결정되는 구조부재를 변경하지 않아도 연성파괴메카니즘을 확보할 수 있다는 것을 제시하였다.

• 한국디지털건축인테리어학회논문집
• /
• 제9권1호
• /
• pp.31-40
• /
• 2009

This study is intended to suggest methodologies in theory that is dedicated to improve existing features in BlM tool sets and introduce a new horizon for developing new features in the future so that more functionality can be provided to the work process of architect. To be more utilized of BlM tool sets in a useful way, it is important to make sure to program a calculation method used in the design process which is based on the information provided by architect, such as design item with detailed process and transformed parametric information on warranty data. Finding pros and cons in the usability from the well-known 3D modeling applications and taking highly usable UI features from the existing applications, and using a common wording were carried out. Design architect identifies reusable parametric information and then finds an algorithm between each items so that BlM tool sets can contribute to design field in the future. Therefore, the formula has been developed for the items considering business aspects and architecturing size in the preliminary-design, and design aspects in the schematic design with idendifying inputs and outputs that is necessary to become fixed factors.

• 대한조선학회지
• /
• 제20권3호
• /
• pp.25-32
• /
• 1983

Korea Institute of Machinery and Metals(KIMM) purchased a computer program for preliminary ship design from the ship Research Institute of Norway(NSFI). The program PROCAL(PROject CALculation) is described with other programs developed by NSFI such as SHIPMODEL, FLEET, SHIPSHAPE, SKRIN.

• 한국해양공학회지
• /
• 제14권2호
• /
• pp.112-116
• /
• 2000

To determine a preliminary hull form with a minimum viscous resistance this study considers the systematic variations of full form and calculations of the viscous resistance for varied hull forms. A preliminary hull form can be determined from a parametric study of viscous resistance.