• 태양에너지
• /
• 제19권2호
• /
• pp.45-56
• /
• 1999

The performance of vertical and horizontal tubes with extended surface of rectangular and triangular cross section was investigated theoretically for boiling heat transfer. A simple method for numerical program assuming one-dimensional heat flow was used to predict the performance of these extended surface tubes. The object of this study was to predict the effects of the height, thickness, numbers and, clearance of the extended surface on boiling heat transfer. The results showed that extended surfaces are quite effective as compared to plane surfaces especially near the bum-out point and to promote heat flux in boiling heat transfer.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.30-40
• /
• 1999

The possibility of the characterization of sheet formation by image analysis with transmitted light was evaluated. Specific perimenter, average perimeter and variation could not be used to predict the sheet formation because there were no corrleation. Although image analysis method still have a lot of problems , it was found that the contrast intensity obtained by image analysis with transmitted light can be used to predict the sheet formation. In the case of highly filled sheet, the intensity of transmitted light was too low to characterize the sheet formation . However, it was possible to characterize the formation of unfilled heavy weight paper($\leq$200g/㎡).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.403-408
• /
• 1998

The analytical model is developed in order to predict the nonlinear flexural responses of bonded and unbonded prestressed concrete beam which contains advanced composite materials. The block concept is used, which be regarded as an intermediate modeling method between the couple method with one block and the layered method with multiple sliced blocks in a section. The model can successfully predict the flexural behavior of variously reinforced prestressed concrete beams.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.444-445
• /
• 2010

Predictive modeling schemes have been developed to characterize the heat Transfer and thermo-mechanical behavior for the plasma display panel (PDP) in operation. The inverse approach was adopted to predict the accurate temperature distribution and deformation in PDP. The predictive models were validated with the measurements from real panel. The developed models could be utilized to predict and/or improve the product quality of PDP.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.25-29
• /
• 1998

One of the crucial problems that must be solved in a computerised unmanned machining environments requires the development of algorithm in order to predict the reliable cutting conditions on surface roughness. This paper is to develop the mathematical models for choosing the suitable cutting conditions and assist a comprehensive understanding of its machinability properties for cutting process by Ball End Mill. The mathematical equations developed to predict the surface results. It has been found that theoretical results obtained from the empirical equations agree with the experimental results of surface roughness.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.219-222
• /
• 1999

A SBR/Image ray-tracing technique using triangular ray tubes to predict the effects of walls. rooms. floors, and staircase is considered. Suggested technique is very efficient to estimate the path loss in three-dimensional buildings including the staircase. The model to predict the path loss through walls and floors in a multifloored building is presented. Measurements are made for three corridors having the staircase at 850 MHz, Measured data shows a close agreement with a simulated data.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.65-65
• /
• 2000

Although it is difficult to predict the future engineers, including optical engineers, must do it on a regular basis. After all, what is the generation of a new optical design, but an attempt to predict what will be needed next year\ulcorner But optical engineers do not consult oracles or look into crystal balls, instead they look at past history, new research, and the trends in technology. This talk will use this approach to look at where optics will take us in this new century. (omitted)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.49-54
• /
• 1994

A dynamic model for the cutting process in the end milling process is developed. This model, which describes the dynamic response of the end mill, the chip load geometry including tool runout, the dependence of the cutting forces on the chip load, is used to predict the dynamic cutting force during the end milling process. In order to predict accurately cutting forces and tool vibration, the model, which uses instantaneous specific cutting force, includes both regenerative effect and penetration effect. The model is verified through comparisons of model predicted cutting force with measured cutting forces obtained from machining experiments.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2007년도 춘계학술대회
• /
• pp.58-60
• /
• 2007

The availability of Information Technology in geological and engineering geological fields is rapidly increasing in Korea. Especially GIS-based hazard mapping is the most distinctive part to predict a possibility of landslide occurrence. Integrated expert system for tunnel construction is also practically used to manage investigated or designed data and to predict un-known underground geological condition. Computer-based field data acquisition tools are also one of the typical part using information technology including GIS combined with mobile phone in Geological field.

• 대한가정학회지
• /
• 제25권1호
• /
• pp.121-127
• /
• 1987

The purpose of this study was to investigate the importance of mental capacity and to see whether it can be a barometer to predict childrne's cognitive development. The instruments used were Pictoral Test of Intelligence to select homogeneous samples, Cucui Scale for their M-power and Conservation Test. The results showed that M-power develops as age increases, and it can be a strong variable to predict their cognitive development. It has been demonstrated that capacity increases developmentally but whether this reflects changes in capacity perse, or in the efficient use of that capacity is a debatable issue. More study needs to be repeated for this matter.