• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.135-139
• /
• 2001

This paper describes a string resonator that is used for the interrogation system of a Fiber Bragg Grating(FBG) strain sensor. The strain on the fiber piece is calculated from the measured frequency based on that the natural frequency of a string is a function of the applied absolute strain. Existing research considered a fiber as a string, but a fiber is not a string in the strict sense due to its bending stiffness, thus the fiber should be modeled as a beam accompanied with an axial force. In the vibration modeling, the relationship between the strain and the natural frequency is derived, and then the resonance condition is described in terms of both the phase and the mode shape for sustaining resonant motion. Several experiments verify the effectiveness of the proposed model of the fiber. The performance of the string resonator is analyzed by measuring the frequency change according to the applied strains in the dynamic range of 1100$\mu\varepsilon$ referred to the displacement from capacitance sensor. From the experimental results, the implemented string resonator provides the accuracy of $\pm$3$\mu\varepsilon$, the quasi-static resolution of ~0.1$\mu\varepsilon$(rms) which amount to be $\pm$0.17$\mu\textrm{m}$ and ~6nm respectively, in case of fiber length of 56mm. For a dynamic strain, it can provide the accuracy of ~3$\mu\varepsilon$ until the frequency comes to 8Hz. As a consequence, the string resonator proposed for FBG sensor provides the high accuracy and the high resolution in strain measurement, and also it is expecting to be used, for the application, to not only strain but also displacement measuring device.

• 한국정밀공학회지
• /
• 제26권6호
• /
• pp.68-73
• /
• 2009

One of the traditional optical methods to monitor a tool is a CCD sensor-based vision system which captures an aspect of the tool in real time. In the case using the CCD sensor, specific lens-modules are necessary to monitor the tool with higher resolution than its pixel size, and a microprocessor is required to attain desired data from captured images. Thus theses additional devices make the entire measurement system complex. Another method is to use a pair of an optical source and a detector per measuring axis. Since the method is based on the intensity modulation, the structure of the measurement system is simper than the CCD sensor-based vision system. However, in the case measuring the three dimensional position of the tool, it is difficult to apply to micro machine-tools because there may not be space to integrate three pairs of an optical source and a detector. In this paper, in order to develop a tool-origin measurement system which is employed in micro machine-tools, the improved method to measure a tool origin in x, y and z axes is introduced. The method is based on the intensity modulation and employs one pair of an optical source radiating divergent beams and a quadrant photodiode to detect a three dimensional position of the tool. This paper presents the measurement models of the proposed tool-origin sensor. The models were verified experimentally The verification results show that the proposed method is possible and the induced models are available for design.

• 제어로봇시스템학회논문지
• /
• 제19권4호
• /
• pp.372-378
• /
• 2013

In this paper, we research the localization problem of the crawler-type inspection robot for underwater structure which travels an outer wall of underwater structure. Since various factors of the underwater environment affect an encoder odometer, it is hard to localize robot itself using only on-board sensors. So in this research we used a depth sensor and an IMU to compensate odometer which has extreme error in the underwater environment through using Extended Kalman Filter(EKF) which is normally used in mobile robotics. To acquire valid measurements, we implemented precision sensor modeling after assuming specific situation that robot travels underwater structure. The depth sensor acquires a vertical position of robot and compensates one of the robot pose, and IMU is used to compensate a bearing. But horizontal position of robot can't be compensated by using only on-board sensors. So we proposed a localization algorithm which makes horizontal direction error bounded by using kinematics relationship. Also we implemented computer simulations and experiments in underwater environment to verify the algorithm performance.

• 한국정보통신학회논문지
• /
• 제17권9호
• /
• pp.2227-2232
• /
• 2013

유도제어 시스템 체계개발의 초기단계에는 운용 효과도 도출 및 요구사항 적합성 검토를 통한 체계 개략사양도출을 위해 효과도 분석을 수행한다. 본 논문의 목표는 M&S (Modeling & Simulation)를 활용한 운용 효과도 분석을 통해 고속 무인 수중운동체의 목표점 도달 임무를 위한 체계 요구사항 도출이다. 운용 효과도는 대상 수중운동체의 목표점 도달 정확도로 정의한다. 도달 정확도에 가장 큰 영향을 미칠 것으로 예상되는 변수는 항법센서 성능이다. 본 논문에서는 관성항법센서(Inertial Navigation Sensor, INS)와 도플러 속도 측정 장치(Doppler Velocity Log, DVL)를 이용한 복합항법을 고려하였다. 몬테카를로 수치 시뮬레이션을 통해 항법센서 성능에 대한 효과도 분석을 수행한다. 몬테카를로 수치 시뮬레이션 결과는 CEP(Circular Error Probability)와 분산을 이용한 확률분석을 통해 분석한다. 상용 항법센서 가격을 고려하여 최적의 가격대 성능비를 갖는 항법센서 성능을 제시한다.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.87-98
• /
• 1999

This study is concentrated on the development of real-time estimation model and vision control method as well as the experimental test. The proposed method permits a kind of adaptability not otherwise available in that the relationship between the camera-space location of manipulable visual cues and the vector of manipulator joint coordinates is estimate in real time. This is done based on a estimation model ta\hat generalizes known manipulator kinematics to accommodate unknown relative camera position and orientation as well as uncertainty of manipulator. This vision control method is roboust and reliable, which overcomes the difficulties of the conventional research such as precise calibration of the vision sensor, exact kinematic modeling of the manipulator, and correct knowledge of position and orientation of CCD camera with respect to the manipulator base. Finally, evidence of the ability of real-time vision control method for manipulator's position control is provided by performing the thin-rod placement in space with 2 cues test model which is completed without a prior knowledge of camera or manipulator positions. This feature opens the door to a range of applications of manipulation, including a mobile manipulator with stationary cameras tracking and providing information for control of the manipulator event.

• 디지털산업정보학회논문지
• /
• 제9권3호
• /
• pp.67-78
• /
• 2013

In this paper, We proposed an development method of application framework for using the precision time protocol(PTP) based on physical layer devices to synchronize clocks across a network with IEEE1588 capable devices. The algorithm was not designed as a complete solution across all conditions, but is intended to show the feasibility of such a for the PTP(Precision Time Protocol) based on time synchronization of heterogeneous network between devices that support in IEEE 1588 Standard application framework. With synchronization messages per second, the system was able to accurately synchronize across a single heavily loaded switch. we describes a method of synchronization that provides much more accurate synchronization in systems with larger networks. In this paper, using the IEEE 1588 PTP support for object-oriented modeling techniques through the 'application framework development Development(AFDM)' is proposed. The method described attempts to detect minimum delays, or precision packet probe and packet metrics. The method also takes advantage of the Tablet PC(Primary to Secondary) clock control mechanism to separately control clock rate and time corrections, minimizing overshoot or wild swings in the accuracy of the clock. We verifying the performance of PTP Systems through experiments that proposed method.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.68-75
• /
• 2000

The flexibility of a manipulator inevitably yields vibration at the end effector. In this work, position and vibration control for a flexible robot arm was studied using a separate voice coil type actuator to raise the accuracy and speed of end tip. A flexible robot arm with a tip mass is modeled as an Euler-Bernoulli beam. An $H_$\infty$$ controller is adapted to get a robust control against unmodeled higher-order mode vibration, output sensor noise, and etc. Simulations and experiments show that the modeling of the system is acceptable and robust vibration control is also achieved.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.369-373
• /
• 1992

Force control of a planar two-link structurally flexible robotic manipulator is considered in this study. The dynamic model is obtained by using the extended Hamilton's principle and the Galerkin criterion. A method is pressented toobtain the linearized equations of motion in Cartesian space for use in designing the control system. The approachto solving the control problem is to use feedforward and feedback control torques. The feedforward torques maneuver the flexible manipulatro along a nominal trajectory and the feedback torques minimize any deviations from the nominal trajectory. The linear quadratic Gaussian/loop transfer recovery (LQG/LTR) design methodology is explotied to design a robust feedback control system that can handle modeling errors and sensor noise, and operates on Cartesian space trajectory errors. The Lqg/LTR compenstaor together with a feedforward ollp is used to control the flexible manipulator. Simulated results are presented for a numerical example.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.173-177
• /
• 1992

The Helicopter has a lot of flight modes. The most characteristic flight mode is Hovering. It enables the helicopter to be used in many situations. However, a helicopter has nonlinear dynamics so its mathematical modeling is very difficult. Hence it is not easy to control helicopter in hover. In this paper, RC model helicopter is selected as a plant. To stabilize the behavior of RC model helicopter, Fuzzy alogrithm is used as a controller and one camera is used as a sensor. To get proper Information from camera Image, three characteristic points are attatched to the helicopter and a position recognition algorithm is developed. Experiments are performed to stabilize 3 rotational motions synchronousely with fuzzy control algorithm. As a result, Fuzzy control represents better performances than the conventional PID control.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.73-79
• /
• 2003

Recently, the tole-robot operations to an unstructured environment have been widely researched. The human's interaction with the tole-robot system can be used to improve robot operation and performance for an unknown environment. The exact modeling based on real environment is fundamental and important process for this interaction. In this paper, we propose an extrinsic parameter calibration and data augmentation method that only uses a circular jig in the hand-eye laser virtual environment. Compared to other methods, easier estimation and overlay can be done by this algorithm. Experimental results using synthetic graphic demonstrate the usefulness of the proposed algorithm.