• Transactions of Materials Processing
• /
• v.32 no.6
• /
• pp.335-343
• /
• 2023

Spur Gear parts for automobile actuators using existing former forging technology were produced in a total of three processes on a former forging machine. However, in order to improve cost increase due to frequent mold breakage, Spur Gear parts were designed and manufactured in the cold forging process after forming the preform through former forging. In other words, in the existing former forging mold, product seating defects occurred due to horizontal movement, resulting in many product defects and mold damage, so there was an urgent need to improve mold life and product defects. In order to improve this, we tried to improve the mold life by improving the existing 3 former forging processes to a former forging process and 2 cold forging processes. Therefore, We developed Spur Gear parts for automobile actuators were developed by applying precision cold forging technology through a former forging process and 2 cold forging processes to improve mold life.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.120-123
• /
• 1999

The precision cold forging process for steering yoke of automobile has been analysed by using rigid-plastic finite element analysis code DEFORM-3D Also the experiment has been performed through the optimized process. Until now steering yoke has been largely manufactured by hot forging or welding of forged head and shaft parts because of technical difficulty. the study has shown successful results of the precision cold forging through the proper selection of the process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.178-182
• /
• 1995

The technique of neural networks is applied to cold forging design system. A user can select more desirable plans in cold forging design by being advised with expert's opinion from neural networks. The neural networks are learned with 3 parts which are most important in cold forging design-undercut, narrow hole, sharp corner. Using the neural networks, the cold forging design system built in this study determines forming possibility about variable shapes in product. We can get available result using the system.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.91-97
• /
• 1996

This paper deals with a cold forging design system by which designers can determine desirable plans of cold forging design even if they have little experience. In this system, neural networks are used to transform qualitative knowledges to quantitative knowledges. The neural network is learned with three parts which are most important in cold forging design - undercut, narrow hole, sharp corner. The capabilities of the system are illustrated through an example of forging design.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.1
• /
• pp.84-90
• /
• 2010

The cold forging Process applies surface lubricant coating in order to smooth the friction during the cold forging process. Currently, most of the lubrication processes apply the zinc phosphate coating, which requires 11 steps and disposes sludge. But the water based lubrication process, which has been newly developed, takes 3 steps only and does not cause sludge. In this study, we present the optimal condition of water based lubrication for the cold forging of axle shaft by an experimental design method. Experimental results with minitab shall be able to predict the optimum water based lubricating conditions for the cold forging processes.

• Transactions of Materials Processing
• /
• v.6 no.6
• /
• pp.500-507
• /
• 1997

The conventional closed-die forgings had been applied to the forging of spur gears. But the forgings require high forging-pressure. In this paper, new precision forging technology have been developed. The developed technology is two steps forging process. Good shaped products are forged successfully with lower forging-pressure than those of conventional forging. The accuracy of the forged spur gear obtained by new precision forging technology is set nearly equal to that of cut spur gear of fourth and fifth class in Korean industrial standard.

• Transactions of Materials Processing
• /
• v.3 no.3
• /
• pp.282-290
• /
• 1994

The outer race of BJ type C.V.Joint has a complicated shape and ball grooves. It is produced by cold or warm precision forging. Especially, the precision level of the ball grooves determines the quality of the part. The objective of the present study is to develop process conditions of the cold forging using the plasticine. Because the cold forging consists of forward extrusion, upsetting, backward extrusion and cold sizing, the study was focused on finding the best perform for each process. The data obtained from the study will be used in the design of the cold forging process for the outer race.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.67-72
• /
• 2003

The cold precision forging of spur gears has been researched, and the effects of relief-hole shape and forging process on the spur gears forming has been analyzed. The results present that the forging load decreases when a suitability diameter of relief-hole is chosen, but the function is not obvious. The spur gears precision forging method with an adjustable movement of concave mould can benefit both the top and the bottom comers forming of the spur gears, full fill the tooth cavity, and decrease the forging load.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.261-262
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.933-934
• /
• 2012