• Economic and Environmental Geology
• /
• v.36 no.4
• /
• pp.269-274
• /
• 2003

This study, one of the projects for investigation of the precious metal deposits of the Circum-Pacific Ocean coon-tries, was performed in a gem field of Pailling, Cambodia, in which there are numbers of undeveloped mineral resources. The gem fields in the Pailling area are typically distributed in the laterite, lying on of weathered basalts. The gem grade of corundum is low in the surface soil horizon(less than 1 m in depth), but is higher in the subsurface. Occurrence and genetic environment of the precious stone are not concerned in the soils. A Precious stone that is already made from at the least upper part of volcanic rocks is produced in large quantities to undergoing to weathering of the rocks. A precious stone is made from upper part of the formation under the high temperature when volcano is vomiting or after vomiting. and/or made from between the formation under the high temperature when other volcano is vomiting. Volcanic rocks including precious stone are a little different from other volcanic rocks when volcano is vomiting, but chemical composition of rocks is not far different from other volcanic rocks.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.29-37
• /
• 1981

The bond strengths with ceramco porcelain were compared between precious alloy S, and non-precious alloys V.U. and R. And the changes in bond strengths of non-precious alloys with ceramco porcelain, according to surface preparations by sand blasting, longitudinal grinding, transverse grinding, and high polishing, were studied. The test specimens were prepared by firing porcelain doughnuts on the surface prepared alloy rods, and investing in dental stone. The specimens were subjected to shear loading forces. The conclusions drawn from the investigation are as follows: 1. The bond strengths with ceramco porcelain were higher in the non-precious alloys U and R, than in the precious alloy S. 2. The bond strengths were in descending order for R alloy, U alloy, V alloy, and S alloy. 3. The bond strengths were highest when the R alloy and U alloy were surface prepared by sand blasting. 4. All bond strength values were lowest when the alloy surfaces were prepared by high polishing.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.1
• /
• pp.1-19
• /
• 2003

The surface of metals should be as smooth as possible for optimum comfort, oral hygiene, low plaque retention, and resistance to corrosion. In this study five specimens of each precious metal(type III gold alloy, ceramic gold alloy, and Ag-Pd alloy) were divided into five groups according to finishing and polishing procedures : group 1(sandblaster), group 2(group 1+stone), group 3(group 2+brown rubber), group 4(group 3+green rubber), and group 5(group 4+rouge). Six specimens of each non-precious metal(Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy) were divided into six groups: group 1(sandblaster), group 2(group 1+hard stone), group 3(group 2+electrolytic polisher), group 4(group 3+brown hard rubber point), group 5(group 4+green hard rubber point), and group 6(group 5+rouge). Considering factors affecting the rate of abrasion, the same dentist applied each finishing and polishing procedure. In addition, the surface roughness of enamel, resin, and porcelain was evaluated. The effect of finishing and polishing procedures on surface roughness of precious and non-precious metals, enamel, resin, and porcelain was evaluated by means of Atomic Force Microscope(AutoProbe CP. Park Scientific Instruments, U.S.A.) that can image the three dimensional surface profile and measure average surface roughness values of each sample at the same time. The obtained results were as follows : 1. According to finishing and polishing procedures, the surface roughness of type III gold alloy, ceramic gold alloy, and Ag-Pd alloy was decreased in the order of group 1, 2, 3, 4, and 5 (P<0.01). 2. According to finishing and polishing procedures. the surface roughness of Co-Cr alloy, Ni-Cr alloy, and Co-Cr-Ti alloy was decreased in the order of group 1, 2, 3, 4, 5, and 6 (p<0.01). 3. There was not statistically significant difference in the surface roughness among three metals of precious metals in group 1 but was significant difference in group 2, 3, 4, and 5 (P<0.05). 4. There was not statistically significant difference in the surface roughness among three metals of non-precious metals in all groups. 5. When the surface roughness of the smoothest surface of each metal, enamel. porcelain, and resin was compared, porcelain was the smoothest and the surface roughness was decreased in the order of Ni-Cr alloy. Co-Cr alloy. Co-Cr-Ti alloy, resin. Ag-Pd alloy, ceramic gold alloy type III gold alloy, and enamel (P<0.01). The results of this study indicate that the finishing and polishing procedures should be carried out in a logical, systematic sequence of steps and the harder non-precious metals may be less resistance to abrasion than are the softer precious metals.

• Journal of the Korean Society of Costume
• /
• v.26
• /
• pp.221-232
• /
• 1995

It was aimed to study the costume of Koryo dynasty based upon the one hundred and thirty four pictures of the engraved painting on the wood. The costume to study were made about 400 years during the King Mok-jong(1006) to the forth year of the king Wu based upon the Avatamaka Sutra and Pulsul-Yaesu 가) Men's wear 1. Hair style and hair dress ; Man tied up a top knot and they put on the hat such as a Kuan, Kun, and Mo. The young boys binds his hair up one, two, and three knots. 2. Clothes : 1) King wore an uniform of Mien-lu Kuan system. 2) The Crown Prince and high rank officials wore Yuan-yu-Kuan Won-jung-po-ju-Kuan, Sa-bang-Kuan, Yun-wha-Kuan and montain shape Po-ju-Kuan as a court dress. 3) Officials put on the Pok-du as an official dress and Won-jung-ip-mo, Kun and Mo as an everyday dress, the monk put on the diamond shape Do-kuan and Du-kun and the soldier put on the Helmet. Costume system of man was as follows ; They wore exchanged shape collar, big sleeve jacket, long skirt, apron, hanging precious stone big belt as a Mien-pok. 4) The soldiers wore helmet, Keun-Kap, Scarf, Pee-Bak, Hung-Kap, Pok-Kap, Yang-Dang-Kap, We-Yo-Kap, Kum-Kap, and caries arms. Lower-level officials wore Pe-Bal, Kun-Mo, gae, won-leung, very small sleve jacket, a long coat reaching up to the knee length, slacks, belt, loin cloth and apron. 5) Children's bind their hair up angle shape and wore a half long jacket raching up to the hip and slacks. 나) Women's wear; 1. hair style and hair dress; 1) High rank women's hair style was very extravaganceful. They made their hair top knot (one, two, or more knots) and decoraed precious stone, pan shape head dress, wheel shape head dress, and flower shape precious stone decorated head dress. 2. Clothes ; 1) High rank ladi's wore Kun-Kyun attached jacket, and jacket sleeves decorated pleats, and pleats decorated long skirt, apron, back apron, knot belt, scarf, this type is the same with Dang Dynasty, five dynasty of china, Song, Kum, Won, Myung Dynasty, and our costume of Poe-hae, and Shilla Dyansty. 2) Official ladies wore exchange shape collor, big sleeve jacket, long pleats skirt, apron, and back apron, scarf. 3) Women wore top knot hair style and decorated by ribbons. Shoulder scarf attached small sleeve jacket and wore reaching up to the knee length. Side seam is open and under wear was long skirt. 4) High knot hair style and exchanged shape collor jacket, under wear wore long skirt. They wore under skirts and the jackets. 5) High knot hair style, exchange shape collor jacket reaching up to the knee length small sleeve under wear wore long skirt, belt. 6) High knot hair style, big sleeve jacket and long skirt. 7) Foot wear wore boots, mokasin type shoes, sandal.

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.252-260
• /
• 2010

A 90-d trial was conducted to determine the influence of additives such as pegmatite (Peg), precious stone (PS), grape pomace extracts (GPEx) and complexes of these additives (Peg + GPEx and PS + GPEx) via evaluation of meat quality including sensory properties in 90 d old finishing pigs. There were no significant differences in the approximate composition and physiochemical characteristics, including meat color, among the treated groups. However, the Peg treated group was found to have a higher water holding capacity than the other groups. The shear-force was evaluated as an indicator of hardness and found to be lower in the Peg and GPEx treated groups, and this tendency was greater when the complex of Peg and GPEx was supplied. No significant differences were observed among groups following analysis of the free amino acid composition and fatty acid (FA) composition. Sensory evaluation of the boiled loins showed significantly (p<0.05) better results from pigs fed diets containing Peg and GPEx complex. These results suggest that Peg may improve the water holding capacity and tenderness. In addition, supplementation with a complex of Peg and GPEx may improve tenderness.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.74-81
• /
• 2008

The writing brush, ink stick, paper, and ink stone were the four precious things of the studying and recording in oriental world until even nowaday. The oriental paper was comparatively well evaluated in many papers and reviews, but it is difficult to find some scientific reports or reviews about the ink stick. In this paper, the scientific aspect of ink sticks of oriental maine three country(Korea, China, Japan) were evaluated by the physical, chemical and microscopic analysis. The result could summarized as fellows; 1. The Korean lampblack ink stick contains more carbon and less nitrogen and the Chinese ink sticks contain less carbon and more oxygen. 2. The Korean lampblack and cowhide glue contain relatively higher amount of sulphur. 3. The particle size distribution of carbon in the ink stick was not change after grinding in the ink stone. 4. The particle size of carbon and the pore size in the charcoal ink sticks of three country were larger than those of the lampblack ink sticks. 5. The ink solution of the charcoal ink sticks shows high roundness on Hanji while the ink solution of the lampblack ink sticks is spread readily to Hanji surface. 6. The change of whiteness in printing of the ink sticks is notable in thermal treatment.

• Archives of design research
• /
• v.12 no.2
• /
• pp.65-73
• /
• 1999

In Italy, numerous jewelry ornaments have been actively manufactured from long time ago, since Italian has been highly interested in jewelry from the ancient limes, therefor jewelry industry of Italy has been improved at an alarming pace with latest cutting-edge technology through their highly-talented artistic sense and workmanship of precious metals that have been inherited without any interruption based on the traditional history and culture. One out of five ornaments in the whole world is made in Italy, so Italy is the biggest maker to manufacture ornament made of gold, silver and precious stone recording more than 70 billion dollar of annual sales. The diversified composite factors-handmade oriented ornaments with artistic concept based on their inherited craftsmanship from generation to generation and refinedly and sensationally harmonized design -have resulted in development and mass manufacturing for ornaments. Now days the jewelry maker of Italy have actively introduced improved management know-how and international approach for marketing and made a strenuous effort to newly technology and creative design through close relationship with designers.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.86-107
• /
• 2014

The large stone cist tomb 8501 of Lingcheng prefecture Xiaoheishigou, according to Chinese chronology, was built during the late Western Zhou period. However in this tomb not only Chinese Zhongyuan style bronze ceremonial vessels but also indigenous style bronze ceremonial vessels and instruments and hybrid bronze ceremonial vessels with a mixture of both indigenous and Chinese styles were excavated in large numbers. The bronze ceremonial vessel assemblage of Xiaoheishigou, in comparison with the decorum regulations and bronze cauldron and coffer system of the Chinese Zhongyuan region of the same time period, belong to that of the lowest status category. However, in contrast to the lowest class category tombs of the Chinese Zhongyuan region, in this tomb, with the exception of cauldrons and coffers, the remaining food and wine vessels of the assemblage match the standard of emperors and feudal rulers of vassal states. This is reinforced by the burial of musical instruments. Of the bronze ceremonial vessels of Xiaoheishigou large stone cist tomb 8501, the indigenous and hybrid styles, in consideration of manufacture technology seem to have been manufactured locally. However, the form, pattern and also the standards of the Western Zhou style bronze ceremonial vessels are identical to those of the Chinese Zhongyuan region and therefore it is clear that they were manufactured in Western Zhou. The reason for these precious ceremonial vessels which were manufactured and used in the many individual vassal states of the Chinese Zhongyuan region being buried in Xiaoheishigou, seems to have been the result of economic exchange and friendly political relations between the Xiaoheishigou and other groups rather than these vessels having been plundered by the Xiaoheishigou group. A distinct cultural sphere existed between the Upper Xiajiadian culture and Western Zhou which interacted frequently with both sides.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.3
• /
• pp.69-76
• /
• 2012

This study aims to investigate the mechanism that analysis of the layout-structure of the Traditional Village Oeam. It can identify through the division of area, the properties of layout residential type, the relationship between buildings and roads and location of buildings and a gate. Traditional Folk Village is our precious cultural heritage. However, now is time for our disappearing heritage due to the indiscriminate development. This study will good references for residential Complex in modern society. As a result of this study road in the center of village is divided into two areas. The road and stream plays an important role in the housing layout and composition of the village. Oeam village houses are separated by scale as large, middle, small scale housing. The courty yard is formed widely through a various of housing plan. So that ventilation and light is favorable even if the main house is high. Each house has the individuality with avoiding the village roads and using the byroads and stone wall. Therefore, each house can protect the privacy of houses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.1
• /
• pp.27-30
• /
• 2003

Amethyst is a precious stone in Korea. As natural quartz are usually mixed with smoky quartz, amethyst, and milky quartz, we need to evaluate the amount of the amethyst quantitatively in ores. Although the optical evaluation with bare eyes has been common in assay so far, we propose that the diamagnetic property and microstructural difference characterization be the solution for the evaluating the quartz ores. In addition, FTIR (Fourier transformation infra-red) could help to identify the amethyst transparency. We report that we could evaluate the amethyst quantitatively with M-H hysteresis characterization, transmission electron microscopy (TEM) observation and FTIR characterization.