• Journal of Information Display
• /
• v.13 no.3
• /
• pp.125-130
• /
• 2012

In this paper, a new precharging method without any side effects is proposed to overcome image degradation caused by insufficient charging times. This work explains why the precharging method can compensate for short charging times. However, side effects of the precharging method in the form of horizontal line artifacts are addressed, wherein line artifact-compensating precharging (LCP) is presented to mitigate the side effects. Behavioral modeling is employed to investigate the side effects by estimating transient responses of a liquid crystal display. The LCP proves that it can dramatically reduce line artifacts caused by precharging because the brightness difference of adjacent pixels does not exceed 1.0.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.583-584
• /
• 2008

This paper presents a low-power and high-speed pulsed flip-flop based on dual-precharging and conditional discharging. The dual-precharging operation minimizes the parasitic capacitance of each precharge node, resulting in high-speed operation. The conditional-discharging operation minimizes the redundant transitions of precharge nodes, resulting in low-power operation. Linear feedback shift register (LFSR) designed in a $0.18{\mu}m$ CMOS technology using the proposed flip-flop achieves 32% power reduction as compared to conventional design.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.1
• /
• pp.115-120
• /
• 2004

An indoor air cleaner consisting of a dielectric barrier discharge system and an electrostatic precipitator (ESP) was experimentally investigated. The function of the dielectric barrier discharge is to precharge particles by producing nonthermal plasma before indoor air enters ESP, leading to an enhancement in dust collection efficiency. The dependence of particle size distribution on the plasma discharge was examined to understand the mechanism of the particle precharging. The plasma discharge was found to increase the electrical force of the particles, rather than agglomerate them. Coarse particles in the range of 0.5 to $5.0{\mu}m$ were observed to be easily collected by this indoor air cleaner, and the present study laid emphasis on the removal of fine particles of $0.3{\mu}m$. The collection efficiency of the fine particles was largely enhanced by the plasma discharge.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.04a
• /
• pp.178-179
• /
• 1999

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.E2
• /
• pp.53-59
• /
• 2001

A hybrid dust-collector combining electrostatic charging with fabric filtration method was developed, and its performance characteristics were evaluated in this study. Charged particles build porous dendritic structure on the surfaces of filter by electrostatic attraction, increasing the collection efficiency of dust particles and reducing the pressure drop through the deposited dust layer and filter media. The cleaning performance of the dust layer is improved because the dendritic structured dust layer can be removed more easily by pulse jet cleaning flow. The results of the experiment showed a reduction of fine particle emission of 37% and the energy saving of 13% by precharging dust particles before filtration.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.5
• /
• pp.1-12
• /
• 1999

A new algorithm of constructing binary decision diagram(BDD) for design verification of switch-level circuits is proposed in this paper. In the switch-level circuit, functions are characterized by serial and parallel connections of switches and the final logic values may have high-impedance and unstable states in addition to the logic values of 0 and 1. We extend the BDD to represent functions of switch-level circuits as acyclic graphs so called switch-level binary decision diagram (SLBDD). The function representation of the graph is in the worst case, exponential to the number of inputs. Thus, the ordering of decision variables plays a major role in graph sizes. Under the existence of pass-transistors and domino-logic of precharging circuitry, we also propose an input ordering algorithm for the efficiency in graph sizes. We conducted several experiments on various benchmark circuits and the results show that our algorithm is efficient enough to apply to functional simulation, power estimation, and fault-simulation of switch-level design.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.687-691
• /
• 2011

In this paper, we design an 8-bit eSuse OTP (one-time programmable) memory in consideration of EM (electro-migration) and eFuse resistance variation based on a $0.18{\mu}m$ generic process, which is used for an analog trimming application. First, we use an external program voltage to increase the program power applied an eFuse. Secondly, we apply a scheme of precharging BL to VSS prior to RWL (read word line) activation and optimize read NMOS transistors to reduce the read current flowing through a non-programmed cell. Thirdly, we design a sensing margin test circuit with a variable pull-up load out of consideration for the eFuse resistance variation of a programmed eFuse. Finally, we increase program yield of eFuse OTP memory by splitting the length of an eFuse link.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1542-1547
• /
• 2003

Although dielectric barrier discharge (DBD) in air has been applied to a wider range of aftertreatment processes for HAPs (Hazardous Air Pollutants), due to its high electron density and energy, its potential use as precharging dust particles is not well known. In this work, we measured size distributions of bimodal aerosol particles and estimated collection efficiency of the particles by an electrostatic precipitator (ESP) using DBD as particle charger. To examine the particle collection with DBD charger, nano size particles of NaCl(20∼100nm) and DOS (50∼500nm) were generated by a tube furnace and an atomizer, respectively. For experimental conditions of 60㎐, 11㎸ and 60 lpm, the particle collection efficiency for the hybrid system was over 85%, based on the number of particles captured.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1435-1440
• /
• 2003

Although Dielectric Barrier Discharge (DBD) in air has been applied to a wider range of aftertreatment processes for HAPs(Hazardous Air Pollutants), due to its high electron density and energy, its potential use as precharging dust particles is not well known. In this work, we measured size distributions of bimodal aerosol particles and estimated collection efficiency of the particles by electrostatic precipitator(ESP) using DBD as particle charger. To examine the particle collection with DBD charger, nano size particles of NaCl($20{\sim}100$ nm) and DOS($50{\sim}800$ nm) were generated by tube furnace and atomizer, respectively. For experimental conditions of 60 Hz, 11 kV, and 60 lpm, the particle collection efficiency for the hybrid system comprising DBD charger and ESP was over 85 %, based on the number of particles captured.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.452-454
• /
• 2000

In recent years, the Thin Film Transistor Liquid Crystal Display (TFT-LCD) is used in a variety of products as an interfacing device between human and them. Since TFT-LCDs have trend toward larger Panel sizes and higher spatial and/or gray-scale resolution, pixel charging characteristic is very important for the large panel size and high resolution TFT-LCD pixel characteristics. In this paper, both data line precharging method and line time extension (LiTEX) method is applied to Pixel Design Array Simulation Tool (PDAST) and the pixel charging characteristics of TFT-LCD array were simulated, which were compared with the results calculated by both PDAST In which the conventional device model of a-Si TFTs and gate step method is implemented.