• 한국철도학회논문집
• /
• 제20권5호
• /
• pp.625-636
• /
• 2017

본 연구는 프리캐스트 콘크리트궤도의 온도 변화에 따른 거동과 초기 변형 특성을 규명하고, 궤도 슬래브의 초기 변형과 온도 경사에 의한 변형이 열차하중에 의한 슬래브의 응력 분포에 미치는 영향을 고찰하는 것을 목적으로 한다. 본 논문은 2개의 논문 중 첫 번째 논문으로 이 논문에서는 프리캐스트 콘크리트궤도의 변형과 응력을 계산할 수 있는 유한요소 해석모델을 제시하였으며, 현장에 부설된 프리캐스트 콘크리트궤도에서 측정한 온도 분포와 변위를 해석 결과와 비교하였다. 분석 결과에 따르면 초기 변형에 의해 슬래브는 항상 상방향 컬링(curl-up)이 있는 상태에 있고, 측정된 깊이별 온도를 입력으로 하여 구한 슬래브 수직 변위와 계측 변위를 비교하면 초기 변형에 상응하는 슬래브 상하부 온도차, 즉 유효 내재 온도차(EBITD)를 결정할 수 있으며, EBITD를 적절히 가정하면 해석 변위와 계측 변위가 잘 일치하는 것으로 나타났다.

• 대한토목학회논문집
• /
• 제39권3호
• /
• pp.451-460
• /
• 2019

우리나라는 제한된 국토 면적에 비해 인구 밀도가 높고 그에 따른 교통량 증가로 인한 효율적인 공간 이용의 필요성이 시급하다. 이를 위해 여러가지 지하구조물의 건설이 증가하고 있으며 그 대표적인 것이 복층터널이다 대심도에 구축되는 복층터널에서 중간슬래브의 시공기간은 전체 공정에서 터널 라이닝 구축 다음으로 중요한 부분이라 할 수 있다. 복층터널에서 중간슬래브를 구축하는데 소요되는 공기를 최소화할 수 있는 방안으로는 공장에서 제작된 프리캐스트 중간슬래브를 현장으로 운반하여 설치하는 공법이 제시되었으며, 현장에서 중간슬래브를 가설함에 있어서 기존의 크레인을 이용한 가설공법보다 안전하고 시공성을 향상시키기 위한 전용가설장비가 개발되어 인력투입을 최소화한 기계화가설 공법을 이 연구에서 제시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.564-571
• /
• 1998

The function of diaphragms at abutments and piers of prestressed concrete (PSC) box girder train bridge is to transfer forces from the superstructure onto bearings or column and to stiffen the superstructure cross-section against in-plane deformation. Due to large stress disturbance at diaphragm, the design for the diaphragm using conventional design method is relatively irrational than designs for other structual members. And, due to contribution to boundary condition of deck slab by the diaphragm, the behavior of deck slab near the diaphragm is different from behavior of the deck slab obtained from two dimensional analysis of the bridge, which is basis far the design of deck slab. In this paper, three dimensional behavior of deck slab near diaphragm of PSC box girder train bridge constructed by the precast span method are analyzed by using three dimensional finite element modeling. Then, strut-and-tie model is applied to design the diaphragm of PSC box girder train bridge. The modeling techniques in this paper can be applied effectively to examine the causes of cracks at deck slab near diaphragm and to design diaphragm rationally.

• 콘크리트학회지
• /
• 제10권6호
• /
• pp.161-168
• /
• 1998

본 연구는 수직전단하중에 대한 프리캐스트 바닥판간 이음부거동을 규명하고 수직전단력 전달에 유리한 이음부 구조도출을 위해 female-female 형식의 이음부를 제안하고, 실험 및 유한요소해석을 수행한 것이다. 경사각, 이음부깊이/높이 및 구속응력을 변수로 총 18개의 실험체에 대한 실험 및 유한요소해석결과 ,이음부의균열저항성 개선을 위해서는 경사각이 60。, D/H가 1/4일 경우가 유리하며 측방향구속으로 이음부를 압축상태로 유지하는 것이 이음부 균열방지에 효과적임을 알았다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.662-667
• /
• 2009

In this study, the serviceability of Waffle shaped(WAS) and Double-Tee(DT) precast concrete slabs was evaluated and compared based on the vertical acceleration magnitude induced by walking and heel drop loads. Tests were conducted for practical building structures (a shopping mall in Hanam) of which floor systems used WAS and DT slabs. Natural frequencies of the slabs were similar to those obtained by using analytical models. The measured acceleration level was evaluated by vertical floor acceleration criteria presented by ISO-2631, AIJ(1991, Japan), and a previous study regarding floor vibration limit. Test results showed that both WAS and DT slabs satisfied all the criteria and the maximum acceleration level of WAS slabs was lower than that of DT slabs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.43-46
• /
• 2005

Precast prestressed concrete hollow slab bridge is one of segmented bridge which can be long span, so that the structural behavior of joints of adjacent segment should be evaluated by the analysis as well as experiment. In this study, small scaled beam tests were carried out to determine joint shear key shape and restraint stress by prestressing. From the tests and the analysis, it was found that the joint key shape and the restraint stress affect the behavior of segments and the segments which has the height to the width of shear key as 1/3 possess maximum shear resistance.

• 한국소음진동공학회논문집
• /
• 제18권5호
• /
• pp.533-540
• /
• 2008

In this study, a new slab system where a part of precast slab is connected each other by viscoelastic material is proposed and numerical analysis is performed to evaluate the effect of the connection between the material and PC slab on the vibration and noise control. Substructuring is introduced to develop the equation of motion for the slab system. In addition, the optimal properties of viscoelastic material are investigated. For the performance evaluation of the new slab system, the sound power and acceleration responses of the slab are compared with those of two way slab and one way slab, respectively. Numerical analysis results show that the sound power of the new slab system can be reduced by viscoelastic material significantly.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1303-1308
• /
• 2007

Recently, precast concrete tracks are replacing ballast track for efficient and economic maintenance of track. Precast concrete railroad tracks are manufactured in factory, and transported to railroad construction site for installation. Therefore, quality of precast concrete track itself should be sufficiently good. On the contrary to the convenient manufacturing of precast concrete track, the installation of a precast concrete track requires careful steps. Typically, a precast concrete track is placed on an approximately 15-cm thick lean concrete layer. A mortar is filled between lean concrete layer and precast concrete track to adjust the sloping angle of a precast concrete track for a safe train operation at a curvy section. Then, the use of filled mortarproduces a void underneath a precast concrete track, which is harmful to structural safety of a precast concrete track undercyclic loading. Therefore, it is essential to make sure that there is no void left beneath a precast concrete track after mortar filling. In the continuous resonance method, the amplitude of frequency response measured using an instrumented hammer and an accelerometer is plotted against a pseudo-depth, which is half of the wave velocity divided by frequency. The frequency response functions are measured at consecutive measurement locations, 6-cm interval between measurement points, and then combined together to generate a 2-D plot of frequency response. The sections with strong reflections or large amplitude of frequency response are suspicious areas with internal voids and unfilled areas. The 2-D frequency response plot was efficient in locating problematic sections just by examining the color shade of a visualized plot in 2-D format. Some of the problematic sections were drilled to make a visual inspection of mortar filling. The visual image of interface between mortar and precast concrete track was verified using the validity of the continuous resonance technique adopted in this research.

• 콘크리트학회지
• /
• 제16권5호
• /
• pp.16-19
• /
• 2004

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2011년 춘계학술대회 논문집
• /
• pp.189-192
• /
• 2011