• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.77-78
• /
• 2023

As large logistics buildings have high floor heights and long spans, these buildings are designed as PC structures, and large cranes are used to lift PC members. PC erection planning can generally cause errors depending on the field engineer's experience. To solve this problem, a basic analysis method is needed to establish a systematic PC member erection plan. Crane work can be minimized if the trajectory is easily and quickly calculated according to the location of the crane and applied to the site. Therefore, the objective of this study is a basic study of crane trajectory distance calculation for sustainable PC members erection of large logistic building. In this study, a crawler crane commonly used for lifting PC members is limited. The trajectory distance for the PC erection plan was automatically calculated using the algorithm.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권3호
• /
• pp.10-19
• /
• 2013

최근, 프리캐스트를 통한 모듈화에 대한 관심으로 인해 교량 및 빌딩 뿐만 아니라, 원전구조물, LNG 가스탱크, 중소형 강합성 구조물 등 특수구조물에도 프리캐스트 모듈화에 대한 연구가 활발하게 이뤄지고 있다. 본 연구에서는 프리캐스트 제작의 시공 및 작업성, 원활한 자재의 조달할 수 있는 방법으로 페로시멘트 (ferrocement)를 바탕으로 한 스틸메쉬로 보강된 모르타르 프리캐스트 패널을 제작하였다. 모르타르는 고강도 및 고유동성을 지니도록 실리카퓸과 고로슬래그의 배합율에 대한 변수연구를 통해 최적의 배합을 선정하였으며, $1,200{\times}600{\times}150mm$의 패널을 제작하여 스틸메쉬로 보강한 모르타르 시편과 일반 철근콘크리트 시편을 보강비 2%와 4%로 각각 제작하였다. 제작된 스틸메쉬로 보강한 모르타르의 프리캐스트 모듈화의 적용 가능성을 판단하기 위하여 기본적인 재료물성실험과 자유건조수축실험을 수행하였으며, 선하중으로 하중을 재하하여 3점 휨 시험으로 스틸메쉬로 보강한 모르타르의 구조성능을 검토하였다. 실험결과를 통해, 스틸메쉬로 보강된 모르타르 프리캐스트 패널은 높은 휨성능 및 연성효과가 있으나, 4%로 보강된 스틸메쉬 모르타르 프리캐스트 패널은 전단보강에 대한 고려가 필요하다고 판단되며, 이에 대한 조치가 이루어진다면 프리캐스트 모듈화 부재로 적용이 가능하다고 판단된다.

• 한국건축시공학회지
• /
• 제16권5호
• /
• pp.429-436
• /
• 2016

최근 인건비 상승 및 노동인력의 고령화로 인한 건설인력의 부족, 초고층 건물의 공기단축과 같은 문제들이 대두되면서 PC공법에 대한 연구가 활발히 진행되고 있다. 하지만 대부분의 연구는 PC공법에 대한 개발과 구조적 해석을 목적으로 하고 있으며, 공사관리 측면의 연구들이 부족한 실정이다. 이에 본 연구는 '중공 PC기둥 복합공법(이하 HPC공법)' 에 대한 공사관리 측면의 연구로서, HPC공법의 계층분석적 의사결정(AHP)을 이용한 편익-비용 분석을 목적으로 하였다. 이를 위해 기존 문헌과 연구 자료를 조사하여 HPC공법의 비교대상 공법을 선정하고, PC복합화 공법의 시공절차와 전문가 면담을 기반으로 한 차이점 분석을 통해서 평가기준을 선정하였다. 편익측면과 비용측면의 평가요소 및 평가항목에 대한 쌍대비교를 위해서 설문조사를 실시하였다. 설문은 PC공사에 대한 충분한 경험을 가진 전문가들을 대상으로 심층면접방식으로 실시하였다. 분석결과, HPC공법은 비용에 비해 편익의 가치가 더 크며 현장에 적용할 경우, 하프슬래브공법과 비교하여 충분한 경쟁력이 있을 것으로 판단된다.

• 건축역사연구
• /
• 제9권3호
• /
• pp.51-69
• /
• 2000

This study tries to analyze the development of architectural technologies appeared in several tall buildings and large spatial structures from 1955 to 1999 in Korea. We suppose that these buildings represent the development of technology in Korean modern architecture. By the detailed analysis of these buildings, we can arrive at a conclusion as such; During the years 1955-1999, there existed a great changement in the eighties. We can find this fact very well in the domain of structural system and curtain wall system. In large spatial structures, the structural-system of shell and steel truss dome was replaced by that of space frame, space truss and cable truss with membrane. In tall building, the structural system of rigid frame and shear wall was replaced by tubular system, core and outrigger system. Korean architects introduced the aluminum curtain wall in the sixties, but its low technological level caused many problems in reality. Therefore, precast concrete curtain wall appeared from seventies as the main method for an outer wall in tall building. With the augmentation of height after 1980, PC curtain wall was replaced by the aluminum curtain wall of unit type and structural glass wall system. These systems help to stress the transparency in a tall building.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.140-154
• /
• 1992

The objective of the research stated here was aimed at providing the information needed to establish the Korean Seismic Design Code Recommendations and Guides for precast concrete (P.C) large panel apartment buildings. This was accomplished by investigation and analysis of the response of P.C large panel structures subjected to shaking table excitation simulating earthquake ground motion. one of the test specimens used was 1/3-scaled 3-story box P.C model provided by Sam-Hwan Camus Corporation. The 4m $\times$4m shaking table was used to simulate the earthquake ground motion. the employed input accelerogram was the one recorded as Taft N21E component and the peak ground acceleration(PGA) was scaled depending on the desired level of seismic severity and the time according to dynamic similitude rule. Based on results obtained from shaking table test of this P.C model, the following conclusions were drawn . (1) As far as test specimen is concerned, the seismic safety factors turns out to be 7~8. (2)P.C model has damping ratio of about8% which is twice larger than in-situ R.C. structure. And (3)this model has global displacement ductility ratio of 2~3 through the energy dissipation by opening and sliding of joints.

• KIEAE Journal
• /
• 제11권1호
• /
• pp.9-14
• /
• 2011

Currently, the multi-residential apartments used in Korea are mostly bearing wall apartments which don't satisfy consumers for the lack of architectural plan flexibility. And due to remodelling-incompatible, bearing wall apartments have to be reconstructed. It is, thus, necessary to develop multi-residential apartments utilizing composite beam that can replace the conventional bearing wall-type apartment buildings. Composite beams proposed in this paper ensure modification of space and quality control, while the floor heights are maintained at the same floor height as in bearing wall structures. This study analyzes the experimental behavior of composite beams with proper combination of structural steel, reinforced concrete, and precast concrete. By comparing with the theoretical analysis and experimental results, the accuracy of flexural moment capacity and neutral axis was evaluated. The experiments were performed by two simply-supported specimens using loading and unloading. When the analysis results were compared with the experimental results, the flexural moment capacity of the composite beam was shown with an error of approximately -0.5 to 0.1% at the maximum load limit state.

• 콘크리트학회논문집
• /
• 제11권3호
• /
• pp.141-152
• /
• 1999

Precast prestressed double-tee slab may be designed by the PCI Design Handbook. It is based on the bridge construction and is required for reorganization for the use of buildings in the domestic construction environments. Much enhanced sections are developed from the reforming process on the determined design factors in the previous experimental works on double tees. Pre-determined shape, reinforcement detail, and 5000 psi concrete strength can not be expected as the best solution for the domestic construction requirements because large amount of use on that systems are anticipated. Flexural tests are performed on four full-scale 12.5m proto-type models, "least depth double tee", which are resulted from the optimization process. Domestic superimposed live load regulation, domestic material properties which is available to product, building design requirements and economy in construction are considered as the main factors to establish. the first two sections are double tee section for 1.2 ton/$\m^2$ market live load with straight and one-point depressed strands and the second two are for 0.6 ton/$\m^2$ parking live load with those strand types. All of the specimens tested fully comply with the flexural strength requirements as specified by ACI 318-95. However, the research has shown that following improved considerations are needed for better result in practice. The locations and method of connection for the lowest bottom mild bar, connection method between precast and cast-in-place concrete, and dap-end reinforcement are need to be improved.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.27-28
• /
• 2023

Currently, the Off-Site Construction (OSC) construction method, which emphasizes the minimization of field work, is being emphasized at construction sites due to the lack of construction skilled manpower, extreme weather, and the Severe Disaster Punishment Act. In this study, we developed a stacked PC modular, which is a method of stacking PC modules, and solved the lifting problem by reducing the weight of the unit module, which is emerging as the biggest disadvantage of PC modules, to around 20 tons. For the connection between modules, structural safety was secured through repeated history tests of the wall and slab connection. Walls and slabs satisfied all statutory fire resistance times through fire resistance tests, and residential performance was evaluated to be satisfactory through mock-up demonstration. The developed PC modular has been applied to the construction of commercial houses, detached houses, shopping malls, churches, etc., and has design results for many buildings such as dormitories, detached houses with 4 floors or more, and resorts, so it is expected that an atmosphere of revitalization of construction methods will be created.

• 한국지진공학회논문집
• /
• 제28권2호
• /
• pp.103-111
• /
• 2024

Due to the recent increase in domestic seismic activity and the proliferation of PC structure buildings, there is a pressing need for a fundamental study to develop and revise the design criteria for Half-PC slabs. In this study, we propose criteria for determining the rigid diaphragm based on the aspect ratio of Half-PC slabs and investigate the structural effects based on the presence of chord element installation. This study concluded that Half-PC slabs with an aspect ratio of 3.0 or lower can be designed as rigid diaphragms. When chord elements are installed, it is possible to design Half-PC slabs with an aspect ratio of 4.0 or lower as rigid diaphragms. In addition, the increase in the aspect ratio of the Half-PC slab leads to a decrease in the in-plane stiffness of the structure, confirming that the reduction effect of the maximum displacement in force direction (𝜟_max ) due to the increase in wall stiffness is predominantly influenced by flexibility.

• 한국건설관리학회논문집
• /
• 제13권3호
• /
• pp.34-42
• /
• 2012

국내 공동주택의 리모델링 수월성 및 이에 따른 장수명화를 위해 그린 프레임 공법이 개발되었다. 그린 프레임 공법은 합성 프리캐스트 콘크리트 부재를 이용한 라멘구조로 벽식 구조와는 달리 양중 및 설치가 골조공사의 주공정으로 작용한다. 따라서 그린 프레임에 의한 적정 골조공사 공기 산정을 위해서는 체계적인 양중계획이 필요하다. 그러나 양중계획은 그린 프레임을 구성하는 요소인 합성 PC 부재(기둥, 보)의 단위 양중공정에 대한 분석이 선행되어야 한다. 따라서 본 연구는 그린 프레임 합성 PC 부재의 양중공정을 분석하는 것을 목적으로 한다. 이를 위해 합성 PC 기둥과 보의 양중절차와 시간을 도출하고, 그 결과를 사례 프로젝트에 적용하여 기준층의 양중 사이클을 분석한다. 본 연구의 결과는 향후 그린 프레임에 의한 골조공사 양중계획 시 핵심자료로 사용된다.