• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1997년도 한국감성과학회 연차학술대회논문집
• /
• pp.179-182
• /
• 1997

In this study, the pre-amplifiers were manufac-tured, which correspinds with the properties of signal source, For measuring the EMG, EEG, ECG and EOG's signal, which are generated at human body, the pre-amplifiers were manufactured in this studywhich was corresponding with the propertiies of dach signal source. So as to do, the bandwidth of filters and the amplitude of amplifiers were adaptively adjusted, according to signal source. Then, the usefulness was represented by showing the measured examples.

• 한국지열·수열에너지학회논문집
• /
• 제10권1호
• /
• pp.1-6
• /
• 2014

In order to evaluate the performance of ground heat source in thermal labyrinth on pre-heating in winter season and pre-cooling in summer season, the followings are made as a conclusion through case study of H project by using the weather data from Korea meteorological administration and CFD model. By making outdoor air inlet via ground heat source in thermal labyrinth for conduction, convection and etc., the temperature rise is $13.4^{\circ}C$as the effect of pre-heating in winter season. On the other hand, as the effect of pre-cooling in summer season, the temperature decrease is $7.2^{\circ}C$. The energy saving rate by the application of ground heat source in thermal labyrinth is 9.1%.

• 설비공학논문집
• /
• 제16권11호
• /
• pp.1060-1067
• /
• 2004

To apply an analysis method of life cycle cost when assessing economics of equipment system, we should basically set up preconditions such as useful life, price escalation rate, interest rate, etc. as well as consider a calculation algorism of source energy and heat source system, which is a complex process for life cycle costing. For this reason, equipment designers tend to plan heat source systems, without a thorough investigation on economics of alternative systems at the pre-design phase. In this process, architectural designers should adopt a proper heat source system, which is one of the most important factors for planning an appropriate architectural design, through a discussion with equipment designers in a short time. In order to offer an evaluation method for equipment designers to analyze economics of an alternative heat source system easily at the pre-design phase, this research would define the simplified economics, evaluation method through analysis of existing papers for economics evaluation, and examine validity through comparison of simplified method values ($LCC_{EC}$) and life cycle costing values ($LCC_{15}$) for six alternative heat source systems.

• 한국소음진동공학회논문집
• /
• 제21권3호
• /
• pp.220-226
• /
• 2011

This paper presents the novel work for source localization of serial multiple impacts in a plate sructure. It is difficult to identify the source of serial multiple impacts with the current source localization techenology(SLT) because of the overlapping of dispersive wave induced by multiple impacts and the reflaction from the edge of the plate. In this paper, the new method is suggested for source localization. The method is developed based on the SLT with pre-signal processing such as some limitation for the selection of three sensors, the frequency range for TFA and impact time interval. Results from numerical simulation and experiment in isotropic plate structure are presented, which show the capability of the proposed method.

• 한국유체기계학회 논문집
• /
• 제15권3호
• /
• pp.57-63
• /
• 2012

Effects of coolant pre-cooling and fuel pre-heating on the performance of a combined cycle using a F-class gas turbine were investigated. Coolant pre-cooling results in an increase of power output but a decrease in efficiency. Performance variation due to the fuel pre-heating depends on the location of the heat source for the pre-heating in the bottoming cycle (heat recovery steam generator). It was demonstrated that a careful selection of the heat source location would enhance efficiency with a minimal power penalty. The effect of combining the coolant pre-cooling and fuel pre-heating was also investigated. It was found that a favorable combination would yield power augmentation, while efficiency remains close to the reference value.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권4호
• /
• pp.471-478
• /
• 2012

The role of moisture absorptive capacity of pre-silage material and its relationship with silage effluent in high moisture by-product feedstuffs (HMBF) is assessed. The term water retention capacity which is sometimes used in explaining the rate of effluent control in ensilage may be inadequate, since it accounts exclusively for the capacity of an absorbent incorporated into a pre-silage material prior to ensiling, without consideration to how much the pre-silage material can release. A new terminology, 'potential water retention capacity' (PWRC), which attempts to address this shortcoming, is proposed. Data were pooled from a series of experiments conducted separately over a period of five years using laboratory silos with four categories of agro by-products (n = 27) with differing moisture contents (highest 96.9%, lowest 78.1% in fresh matter, respectively), and their silages (n = 81). These were from a vegetable source (Daikon, Raphanus sativus), a root tuber source (potato pulp), a fruit source (apple pomace) and a cereal source (brewer's grain), respectively. The pre-silage materials were adjusted with dry in-silo absorbents consisting wheat straw, wheat or rice bran, beet pulp and bean stalks. The pooled mean for the moisture contents of all pre-silage materials was 78.3% (${\pm}10.3$). Silage effluent decreased (p<0.01), with increase in PWRC of pre-silage material. The theoretical moisture content and PWRC of pre-silage material necessary to stem effluent flow completely in HMBF silage was 69.1% and 82.9 g/100 g in fresh matter, respectively. The high correlation (r = 0.76) between PWRC of ensiled material and silage effluent indicated that the latter is an important factor in silage-effluent relationship.

• 한국통신학회논문지
• /
• 제29권11B
• /
• pp.900-910
• /
• 2004

Ad hoc망에서는 이동 호스트들의 움직임으로 인해 경로 단절이 발생한다. 전송 경로의 단절은 목적지까지의 패킷을 전송할 수 없는 상태이므로 패킷의 손실과 지연을 가져온다. 따라서 TCP와 같은 전송 프로토콜은 이를 망의 혼잡으로 간주하여 혼잡 제어 알고리즘을 구동한다. 혼잡 제어 알고리즘은 망의 혼잡을 피하기 위한 수단으로 사용되는데, 경로 단절 시 혼잡 제어 알고리즘이 동작하면 TCP 성능이 떨어진다. 이를 해결하기 위해 본 논문은 TCP-P (TCP Pre-freezing) 기법을 제안한다. TCP-P는 라우팅 프로토콜에서 경로 단절에 대한 정보를 얻지 않고, MAC 계층에서 직접 경로 단절을 감지한다. 그리고 경로 단절 정보를 소스에게 보내어 TCP를 Pre-Freezing 하고 혼잡 제어 알고리즘을 멈추게 한다. 따라서 경로 단절로 인한 패킷 손실을 막고, 경로 재설정 후에도 경로 단절 이전 상태로 전송을 재개할 수 있게 한다. 실험 결과 TCP-P는 ad hoc 망의 경로 단절 환경에서 Proactive하게 반응하며, 패킷 손실 측면에서 다른 TCP 향상 기법들보다 좋은 성능을 보였다.

• 설비공학논문집
• /
• 제28권8호
• /
• pp.325-330
• /
• 2016

This study was conducted to develop a heating system for a fuel cell-driven electric vehicle. The system consists of a compressor, an expansion device and three heat exchangers. A conventional air source heat exchanger is used as primary heat exchanger of the system, and an additional water source heat exchanger is used as a pre-heater to supply heat to the upstream air of the primary heat exchanger. On the other hand, the third heat exchanger consists of a water-to-refrigerant heat exchanger. The heat source of the pre-heater and the water-refrigerant heat exchanger is the waste heat from the fuel cell's stack. In the experiment, the indoor and the outdoor air temperature were fixed, and the compressor speed, EEV opening and waste heat temperature were varied. The results indicate that the $COP_h$ of the proposed system is 3.01 when the system is operating at a 1,200 rpm compressor speed, 50% EEV opening, and $50^{\circ}C$ waste heat source temperature in air pre-heater operation. However, when the system uses a water-refrigerant heat exchanger, the $COP_h$ increases to up to 9.42 at the same compressor speed and waste heat source temperature with 75% EEV openings.

• 대한지구과학교육학회지
• /
• 제5권3호
• /
• pp.307-315
• /
• 2012

The purpose of this study was to examine the effects of small inquiry method on space perception ability and creative personality. Testees of this research are 36 elementary pre-service teachers taking an astronomical observation class. Doing inquiry activity after 36 elementary pre-service teachers are classified into 6 Jigsaw small inquiry. Learning activity was split into two groups, expert group and a population. To find out research outcome, pre-test was executed space perception ability test, creative personality test. Analysis of test result was accomplished with statistical package SPSS 18.0 paired t testing hypothesis. The results of this study are as follows. First, 'source of season change' class using Jigsaw small inquiry method has effect on space perception ability improvement. This was interpreted that space perception ability improvement was effective because characteristic of Jigsaw small inquiry is made up of lots of semin Second, 'source of season change' class using Jigsaw small inquiry method has no effect on creative personality. This was interpreted that experiment and discussion activity getting accomplished in a short time has no effect on qualitative characterizing Creative Personality improvement.

• Smart Structures and Systems
• /
• 제8권2호
• /
• pp.219-237
• /
• 2011

This paper presents novel research into the source localization of multiple impacts. Source localization technology for single impact loads in a plate structure has been used for health monitoring. Most of research on source localization has been focused only on the localization of single impacts. Overlapping of dispersive waves induced by multiple impacts and reflection of those waves from the edge of the plate make it difficult to localize the sources of multiple impacts using traditional source localization technology. The method solving the overlapping problem and the reflection problem is presented in the paper. The suggested method is based on pre-signal processing technology using band pass filter and optimal filter. Results from numerical simulation and from experimentation are presented, and these verify the capability of the proposed method.