Browse > Article
http://dx.doi.org/10.6110/KJACR.2016.28.8.325

A Study on the Performance Characteristics of a Heat Pump System using Stack Wast Heat in Fuel Cell Vehicles  

Jeon, Byungyong (Department of Mechanical Engineering, Graduate School of Jeju National University)
Ko, Wonbin (Department of Mechanical Engineering, Graduate School of Jeju National University)
Park, Youn Cheol (Department of Mechanical Engineering, Jeju National University)
Publication Information
Korean Journal of Air-Conditioning and Refrigeration Engineering / v.28, no.8, 2016 , pp. 325-330 More about this Journal
Abstract
This study was conducted to develop a heating system for a fuel cell-driven electric vehicle. The system consists of a compressor, an expansion device and three heat exchangers. A conventional air source heat exchanger is used as primary heat exchanger of the system, and an additional water source heat exchanger is used as a pre-heater to supply heat to the upstream air of the primary heat exchanger. On the other hand, the third heat exchanger consists of a water-to-refrigerant heat exchanger. The heat source of the pre-heater and the water-refrigerant heat exchanger is the waste heat from the fuel cell's stack. In the experiment, the indoor and the outdoor air temperature were fixed, and the compressor speed, EEV opening and waste heat temperature were varied. The results indicate that the $COP_h$ of the proposed system is 3.01 when the system is operating at a 1,200 rpm compressor speed, 50% EEV opening, and $50^{\circ}C$ waste heat source temperature in air pre-heater operation. However, when the system uses a water-refrigerant heat exchanger, the $COP_h$ increases to up to 9.42 at the same compressor speed and waste heat source temperature with 75% EEV openings.
Keywords
Heat pump system; Air pre heater; Plate heat exchanger; Mobile air conditioner;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Park et al., 2006, System operation device development for fuel cell electric vehicle's, Korea Society for Fisheries and Marine Sciences Education, Vol. 9, No. 2, pp. 69-73.
2 Lee, S. W., 2005, Research and development trends of fuel cell vehicle's, Korea Society of Automotive Engineers, Vol. 27, No. 1, pp. 56-60.
3 Eom, S. G. and Son, Y, J., 2005, A fuel cell system for automobiles, Transactions of The Korean Institute of Electrical Engineers, Vol. 19, No. 2, pp. 12-21.
4 Kim et al., 2005, An experimental study on the cooling performance of carbon dioxide heat pump system for fuel cell vehicles, The Korean Society for New and Renewable Energy, pp. 378-383.
5 Kim et al., 2008, Performance Evaluation of a $CO_{2}$ Heat Pump System for Fuel Cell Vehicles, Korea Society of Automotive Engineers, Vol. 16, No. 1, pp. 37-44.
6 Lee et al., 2007, A Study on Electronically Controlled R-134a Heat Pump System for a Fuel Cell Electric Vehicle(FCEV), Korea Society of Automotive Engineers, Vol. 15, No. 3, pp. 124-132.