• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.163-168
• /
• 2010

In this paper, we propose novel two-way relaying scheme in which number of two users transmit the signal to number of two destination. The scheme is difference with conventional multi-hop two-way relay scheme in which number of two users exchange the each signal. In the conventional scheme, each user have to perform back-propagating self-interference method to remove the own signal from received signal. It occurred to increase the complexity for signal processing at the user. To overcome the problem, we apply the Pre-cancellation which can reduce the process of back-propagating self-interference to our proposal network Simulation result show that proposal scheme outperform the convention multi-hop two-way relay scheme. Also we analysis the trad-off between performance and complexity accordance with using Pre-cancellation method.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.135-146
• /
• 2013

PURPOSES : This study aimed to analyze the impact the operation of pre-signals at 4-leg signalized intersections and present primary environmental factors of roads that need to be considered in the installation of pre-signals. METHODS : Shift of proportions safety effectiveness evaluation method which assesses shifts in proportions of target collision types to determine safety effectiveness was applied to analyze traffic crash by types. Also, Empirical Bayes before/after safety effectiveness evaluation method was adapted to analyze the impact pre-signal installation. Negative binomial regression was conducted to determine SPF(safety performance function). RESULTS : Pre-signals are effective in reducing the number of head on, right angle and sideswipe collisions and both the total number of personal injury crashes and severe crashes. Also, it is deemed that each factor used as an independent variable for the SPF model has strong correlation with the total number of personal injury crashes and severe crashes, and impacts general traffic crashes as a whole. CONCLUSIONS: This study suggests the following should be considered in pre-signal installation on intersections. 1) U-turns allowed in the front and rear 2) A high number of roads that connect to the intersection 3) Many right-turn traffic flows 4) Crosswalks installed in the front and rear 5) Insufficient left-turn lanes compared to left-turn traffic flows or no left-turn-only lane.

• Phonetics and Speech Sciences
• /
• v.3 no.1
• /
• pp.117-123
• /
• 2011

Most individuals with hearing impairment have difficulty in understanding speech in noisy situations. This study was conducted to investigate sentence recognition ability using the Korean Standard-Sentence Lists for Preschoolers (KS-SL-P2) in pre-school age children with cochlear implants and hearing aids. The subjects of this study were 10 pre-school age children with hearing aids, 12 pre-school age children with cochlear implants, and 10 pre-school age children with normal hearing. Three kinds of signal-to-noise (SNR) conditions (+10 dB, +5 dB, 0 dB) were applied. The results for all pre-school age children with cochlear implants and hearing aids presented a significant increase in the score for sentence recognition as SNR increased. The sentence recognition score in speech noise were obtained with the SNR +10 dB. Significant differences existed between groups in terms of their sentence recognition ability, with the cochlear implant group performing better than the hearing aid group. These findings suggest the presence of a sentence recognition test using speech noise is useful for evaluating pre-school age children's listening skill.

• Journal of Practical Engineering Education
• /
• v.9 no.2
• /
• pp.125-132
• /
• 2017

This paper is a study on the application of flipped learning, which is known as a teaching method that provides effective learning, to signal processing subjects. The teaching - learning model used for the class and the implementation examples for three years are described. In-class can be judged to be a relatively successful class, but organization of the video data provided in the pre-class and evaluation of whether or not to study pre-class video have to be improved.

• Journal of Broadcast Engineering
• /
• v.11 no.2 s.31
• /
• pp.229-241
• /
• 2006

In this paper we propose and analyze a novel modulation and pre-equalization method to minimize signal processing time delay for the Equalization Digital On-Channel Repeater (EDOCR) in ATSC (Advanced Television Systems Committee) terrestrial digital TV system. The proposed modulation method uses Equi-Ripple (ER) filter coefficients instead of conventional Square Root Raised Cosine (SRRC) after coefficients for VSB (Vestigial Side Bands) pulse shaping. And the proposed pre-equalization method calculates pre-equalizer filter coefficients by using baseband signal as reference signal and demodulated repeater output signal, then generates a new VSB pulse shaping filter coefficients by convolutioning ER filter coefficients and pre-equalizer filter coefficients. The newly generated pulse shaping filter does not have minimized time delay by adjusting the number of pre-taps of the filter, but also compensates linear distortions caused by ER filter and mask filter.

• The Journal of Korean Physical Therapy
• /
• v.32 no.2
• /
• pp.70-74
• /
• 2020

Purpose: This study examined whether 1) the motor inhibition response as cognitive-behavioral component is learning though a stop signal task using stop-signal paradigm, and 2) whether there is a difference in the learning degree according to imagery training and actual practice training. Methods: Twenty young adults (males: 9, females: 11) volunteered to participate in this study, and were divided randomly into motor imagery training (IT, n=10) and practice training (PT, n=10) groups. The PT group performed an actual practice stop-signal task, while the IT group performed imagery training, which showed a stop-signal task on a monitor of a personal computer. The non-signal reaction time and stop-signal reaction time of both groups were assessed during the stop-signal task. Results: In the non-signal reaction time, there were no significant intra-group and inter-group differences between pre- and post-intervention in both groups (p>0.05). The stop-signal reaction time showed a significant difference in the PT group in the intra-group analysis (p<0.05). On the other hand, there was no significant intra-group difference in the IT group and inter-group difference between pre- and post-intervention (p>0.05). Conclusion: These results showed that the motor inhibition response could be learned through a stop-signal task. Moreover, these findings suggest that actual practice is a more effective method for learning the motor inhibition response.

• Journal of Mechanical Science and Technology
• /
• v.16 no.11
• /
• pp.1379-1394
• /
• 2002

In case of a single input single output (SISO) system with a nonlinear term, a signal compression method is useful to identify a system because the equivalent impulse response of linear part from the system can be extracted by the method. However even though the signal compression method is useful to estimate uncertain parameters of the system, the method cannot be directly applied to a unique system with hysteresis characteristics because it cannot estimate all of the two different dynamic properties according to its motion direction. This paper proposes a signal compression method with a pre-processor to identify a unique system with two different dynamics according to its motion direction. The pre-processor plays a role of separating expansion and retraction properties from the system with hysteresis characteristics. For evaluating performance of the proposed approach, a simulation to estimate the assumed unknown parameters for an arbitrary known model is carried out. A motion platform with several single-rod cylinders is a representative unique system with two different dynamics, because each single-rod cylinder has expansion and retraction dynamic properties according to its motion direction. The nominal constant parameters of the motion platform are experimentally identified by using the proposed method. As its application, the identified parameters are applied to a design of a sliding mode controller for the simulator.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.11
• /
• pp.550-556
• /
• 2001

The computerized cardiac analysis system, which acquires and analyzes the electrical activation signal propagating along the surface of the heart, is indispensible equipment for the open heart surgery and electrical cardiac study. In this paper, the design requirement and the electrical circuit analysis are performed to construct the multi-channel cardiac activation pre-amplifier necessary for a signal conditioning circuit. The general 64 channel configuration is expanded into 128 channels to enhance the spatial resolution on the mapped surface of the heart. The 128 channels pre-amplifier consists of input circuit, differential amplifier, right leg driven circuit and isolation part. It has distinct features; high voltage protection, leakage current limitation, isolation and the maximization of common mode rejection ratio with respect to the half-cell potential difference due to different electrode materials. The final pre-amplifier circuit is assembled with 8 boards, each of which composing of 16 channels.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.218-222
• /
• 2008

RF power amplifier requires linearization in order to reduce adjacent channel interference. And most of the existing linearization algorithms assume that a PA has memory-less nonlinearity. But for the wider bandwidth signal, the memory effect of PA cannot be ignored. This paper investigates digital pre-distortion by use of a memory polynomial model which compensates for amplifier nonlinearity and memory effect. The look-up table based implementation scheme is used to reduce the computational complexity of the pre-distortion block. The linearization performance is demonstrated on wideband CDMA signal and class AB high power amplifier.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.160-163
• /
• 2009

HPA is one of the most essential device in wireless communication systems. However, because of nonlinear characteristic of HPA transmit signal is distorted with both amplitude and phase, this distortion leads to deepening adjacent channel interference. So a technique to change the nonlinear characteristic with linear characteristic is needed. In this paper, Among all techniques, we adopts a polynomial pre-distortion technique. Pre-distorted signal by pre-distorter has opposite characteristic with HPA. In result, the signal passed through pre-distorter and HPA has linear characteristic. But the accuracy of opposite characteristic of HPA is decreased at near portion of saturation point. So we improve the accuracy of opposite characteristic of HPA by using PAPR reduction method. In this paper, an adaptive polynomial pre-distortion technique is introduced to counterbalance the nonlinear characteristic of the transmit power amplifier, and a PAPR reduction method is introduced to increase efficiency of polynomial pre-distorter.