• The Journal of the Korea Contents Association
• /
• v.17 no.6
• /
• pp.661-671
• /
• 2017

The purpose of this study is to compare and analyze the difference between the importance perceived by pre-school teachers and their actual performance in regards to the 7 Guidelines of Safety Education set out by the Ministry of Education, and through the analysis, to identify the items that need priority support and those that need long-term improvement efforts for exemplary safety education for young children. For this, mean average and standard deviation were calculated and paired sample t-test conducted, and IPA(Importance-Performance Analysis) matrix method was performed to analyze the priority and long-term support items and improvement needs. The study results show differences in all areas and all items in the 7 Guidelines of Safety Education by the MoE in the pre-school teachers' perceived importance and actual performance. Areas and items that are identified to be in need of priority support for exemplary safety education in pre-schools; 2 items under 'Violence and Personal Safety' area and I item under 'Substance and Internet Addictions' area. Areas and items that are identified to be in need of long-term improvement efforts are; 6 items under 'First Aid and Emergency Treatment' area, 1 item under 'Violence and Personal Safety' area, 3 items under 'Workplace Safety Culture' area, 3 items under 'Substance and Internet Addictions' area and 1 item under 'Disaster and Safety' area.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.1
• /
• pp.34-41
• /
• 2016

Using UF-SWRO hybrid process, pre-blending tests of seawater and brackish water were performed to investigate the effects on removal of boron and humic acid (HA). Feedwater pre-blending was set based on TDS concentration from 15,000 mg/L to 27,000 mg/L and analyzed for boron removal characteristics. Also organics rejection at same TDS concentration range was investigated by injecting HA. Boron concentration appeared to be high as TDS concentration was high ranging from 76.60% to 83.27%, but boron concentration in final produced water was increased up to 0.69 mg/L from 0.48 mg/L. In cases of HA tests at 10 mg/L, 22,500 mg/L TDS appeared to be higher removal rate of 17.59% than a very poor result of 8.43% in 27,000 mg/L. But high HA removal rate of 57.14% was obtained in produced water with 22,500 mg/L TDS containing 10 mg/L of HA and 27,000 mg/L TDS yielded lower boron removal rate of 54.49%. Meanwhile it was found that a relatively high flux and recovery rate were obtained following process when feedwater was injected with HA. It is considered that most of fouling substances were eliminated by binding between HA and $Ca^{2+}$. Thus, when desalination using UF-SWRO with respect to boron and HA, TDS concentration is determined to be advantageous as lower.

• Journal of Electrodiagnosis and Neuromuscular Diseases
• /
• v.20 no.2
• /
• pp.98-105
• /
• 2018

Objective: To evaluate whether the increase of the amplitude of motor evoked potentials (MEPs) during surgery can imply favorable prognosis postoperatively in spinal cord tumor surgery. Method: MEPs were monitored in patients who underwent spinal cord tumor surgery between March 2016 and March 2018. Amplitude changes at the end of monitoring compared to the baselines in limb muscle were analyzed. Minimum and maximum changes were set to $MEP_{min}$ (%) and $MEP_{max}$ (%). Strengths of bilateral 10 key muscles which were documented a day before ($Motor_{pre}$), 48 h ($Motor_{48h}$) and 4 weeks ($Motor_{4wk}$) after the surgery were reviewed. Results: Difference of $Motor_{48h}$ from $Motor_{pre}$ ($Motor_{48h-pre}$) and $Motor_{4wk}$ from $Motor_{pre}$ ($Motor_{4wk-pre}$) positively correlated with $MEP_{min}$, suggesting that smaller the difference of MEPs amplitude, less recovery of muscle strength. There was a negative correlation between the amount of bleeding and $MEP_{min}$, indicating that the greater the amount of bleeding, the smaller the $MEP_{min}$, implying that MEPs amplitude is less likely to improve when the amount of bleeding is large. It also showed significant difference between patients with improved or no change of motor status and patients with motor deterioration after surgery according to anatomical tumor types. Conclusion: Improve of muscle strength was less when the increase of MEPs amplitude was small, and improvement of MEPs amplitude was less when the amount of bleeding was large. Correlation between changes of status of muscle strength after surgery and tumor types was observed. With amplitude increase in MEPs monitoring, restoration of muscle strength can be expected.

• Composites Research
• /
• v.33 no.6
• /
• pp.365-370
• /
• 2020

The icing formation at aircraft occur problems such as increasing weight of the body, fuel efficiency reduction, drag reduction, the error of sensor, and etc. The viscosity of polyurethane (PU) topcoat was measured at 60℃ in real time to set the pre-curing time. SiO2 nanoparticles were dispersed in ethanol using ultra-sonication method. The SiO2/ethanol solution was sprayed on PU topcoat that was not cured fully with different pre-curing conditions. Surface roughness of SiO2/PU nanocomposites were measured using surface roughness tester and the surface roughness data was visualized using 3D mapping. The adhesion property between SiO2 and PU topcoat was evaluated using adhesion pull-off test. The static contact angle was measured using distilled water to evaluate the hydrophobicity. Finally, the pre-curing time of PU topcoat was optimized to exhibit the hydrophobicity of SiO2/PU topcoat.

• Journal of Satellite, Information and Communications
• /
• v.12 no.3
• /
• pp.35-40
• /
• 2017

Out-of-limit (OOL) alarm method that is threshold checking of telemetry value is widely used for the satellites fault diagnosis and health monitoring. However, it requires engineering knowledge and effort to define delicate threshold value and has limitations that anomalous behaviors within the defined limits can't be detected. In this paper, we propose a satellite anomalous behavior detection system through fuzzy model that is composed by important statistical feature selected by rough-set theory. Not pre-defined anomaly is detected because only normal state data is used for fuzzy model. Also, anomalous behavior within the threshold limit is detected by using statistic feature that can be collected without engineering knowledge. The proposed system successfully detected non-ordinary state for battery temperature telemetry.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.214-222
• /
• 2001

A precise echosounding system to investigate the topographical characteristics of the coastal fishing ground was composed of a public-DGPS receiver, a single beam echosounder and a survey software. To confirm the usefulness of the system, a set-net fishing ground and the distribution of artificial reefs were surveyed. The results obtained are as follows : 1. The 2-D positioning error of the public-DGPS receiver with a DGPS mode and a GPS mode was 5.47 m, 7.03 m, respectively. 2. The experimented set-net fishing ground was located on the level ground at the depth of 9-10 m, a small size valley 1-2 m deep and approximately 10 m wide was found at a distance of 120 m from the set-net to the south. 3. In the artificial reefs' water area near the Jaran Bay, it was confirmed that twenty rectangular artificial reefs were established by the piece at the depth of 15-25 m and a natural reef 5-8 m high on the sea bed was located near the group of artificial reefs. 4. It was confirmed that the precise echosounding system was a useful tool in the pre-study to choice an appropriate water area to provide the artificial reef.

• The KIPS Transactions:PartC
• /
• v.14C no.7
• /
• pp.553-558
• /
• 2007

In this paper, we introduce a set of structures and algorithms for communication efficient public key revocation in wireless sensor networks. Unlike the traditional networks, wireless sensor network is subjected to resources constraints. Thus, traditional public key revocation mechanisms such like the ordinary certificate revocation list is unsuitable to be used. This unsuitability is due to the huge size of required representation space for the different keys' identifiers and the revocation communication as the set of revoked keys grow. In this work, we introduce two communication-efficient schemes for the certificate revocation. In the first scheme, we utilize the complete subtree mechanism for the identifiers representation which is widely used in the broadcast encryption/user revocation. In the second scheme, we introduce a novel bit vector representation BVS which uses vector of relative identifiers occurrence representation. We introduce different revocation policies and present corresponding modifications of our scheme. Finally, we show how the encoding could reduce the communication overhead as well. Simulation results and comparisons are provided to show the value of our work.

• Transactions of Materials Processing
• /
• v.23 no.8
• /
• pp.501-506
• /
• 2014

Progressive shearing with blanking dies is commonly employed to produce large quantities of tiny sheet metal electronic parts. Sheet metal pins, which are narrow and long, that are sheared with a progressive die set are often twisted. The twist in the sheet metal pins, which usually occurs in the final shearing operation, generally decreases with increasing blank holding force. The blank holding forces in all shearing operations are not the same because of different shearing positions and areas. In the current study, the optimal layout of the springs in a progressive die set to minimize the twist of the sheet metal pin is proposed. In order to find the holding force acting on the tiny narrow blanks produced with the proposed springs during the shearing process, the equivalent area method is used in the structural analysis. The shearing of the sheet-metal pin was simulated to compute the twist angle associated with the blank holding force. The constraint condition satisfying the pre-set blank holding force from the previous shearing operations was imposed. A design of experiments (DOE) was numerically implemented by analyzing the progressive die structure and by simulating the shearing process. From the meta-model created from the experimental results and by using a quadratic response surface method (PQRSM), the optimal layout of the springs was determined. The twist of sheet metal pin associated with the optimal layout of the springs found in the current study was compared with that of an existing progressive die to obtain a minimal amount of twist.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.4
• /
• pp.1-9
• /
• 1986

In this paper research results of developing a method of selecting design variables of an optimization problem from a finite set of pre-specified numbers, which can be utilized for the structural optimization with standardized structural members, is presented. The method first finds a continuous optimum under the assumption that design variables can be varied continuously. Then a pseudo-optimum is determined by selecting numbers from the set that are near to the continuous optimum and do not violate constraints. The pseudo-optimum is further improved to obtain the final discrete optimum from the set which minimizes cost function of the problem. In this research, the method is combined with the gradient projection optimization algorithm. The method is applied to several minimum weight truss optimization problems with constraints on the stresses, displacements, and design variables. As the results, it is found that the method can be efficiently applied to various optimization problems of which design variables must be chosen from a standard.

• Journal of the Korea Society for Simulation
• /
• v.15 no.4
• /
• pp.69-77
• /
• 2006

In most positioning and allocation practices, many mathematical models are proposed in various fields. The set covering (SC) problem has many practical applications of modeling not only real world problem but also in military. As our air defense weapon systems are getting older and declining the performance, new plans far acquisition of high-tech air defense weapon system are being conducted. In this paper we established simulation model for optimal allocation of KDX which carries new missile defense weapon system by using partial set covering considering both attacker and defender side. By implementating simulation model, we assess the available scenarios and show the optimal pre-positioning of KDX and interceptor's allocation. Furthermore, we provide a variety of experiments and extensive scale sized situations for Korea Indigenous Missile Defense (KIMD) and support decision-making for efficient positioning of unit.