• 한국치위생학회지
• /
• 제17권6호
• /
• pp.983-992
• /
• 2017

Objectives: This study is to compare measuring gingival and peridontal indices and changes in dental plaque per period using a three mix types of dentifrice and to investigate dental diseases preventive effects depending on gingivitis reducing effect of dentifrice through a clinical experiment. Methods: This study targeted adult females and males with mild to moderate gingivitis from age 20 to 60. The Calculus index, Papillary Marginal Attached Gingival (PMA) index, Gingival index, Patient Hygiene Performance (PHP) index, and Plaque index were measured at pre-experiment and at 1, 2, 4 weeks post experiment. Results: The PMA, Gingival index, PHP index, plaque index of experimentla group decreased after 4 weeks (p<0.05). Conclusions: A three mix types of dentifrice for relieving tooth sensitivity was verified to be effective in removing dental plaque and reducing gingivitis.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.665-672
• /
• 2002

In order to expand agricultural lands in the western and southern coasts of Korean Peninsula, coarse soils excavated from hillsides have been used as fill materials for reclamation. In order to tackle with the problems and to confirm availability, research on soil improvement involve mixing cement to the fine wet soils. Required undrained shear strength(c$\sub$u/) for fill material was analyzed to be 0.34∼1.2kg/$\textrm{cm}^2$. It has been known that when cement is added to high water content marine clay, its unconfined compression strength increased to 2kg/$\textrm{cm}^2$. Consolidation results show that pre-consolidation pressure increased to 1.8kg/$\textrm{cm}^2$ and 3.4kg/$\textrm{cm}^2$ with the addition of 3% and 5% of cement respectively. This result shows that low-height embankments could be constructed without significant compression. Since the effectiveness of improvement may be different site by site, the mix design for each site is necessary in order to optimize it. The process is first to determine aimed shear strength and then optimum mix ratio of cement after carrying out a series of tests.

• 농업과학연구
• /
• 제15권1호
• /
• pp.82-94
• /
• 1988

이 논문(論文)은 기포(起泡)모르터의 제특성(諸特性)에 관(關)한 기초자료(基礎資料)를 제공(提供)하고져 수행(遂行)되었는 바, 이 연구(硏究)를 통(通)하여 얻어진 결과(結果)를 요약(要約)하면 다음과 같다. 1. 각(各) 기포(氣泡)모르터에서 물-시멘트비는 당배합비(富配合比)일수록, 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 감소(減少)하였으며, 보통(普通)시멘트 모르터에 비(比)하여 혼합기포주입형(混合氣泡注入型)은 1.6~53.1%, 사전기포주입형(事前氣泡注入型)은 4.4~24.1%의 물-시멘트비(比)가 감소(減少)되었다. 2. 각(各) 기포(氣泡)모르터의 밀도(密度)는 빈배합(貧配合)일수록, 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 작게 나타났으며, 밀도(密度)의 감소율(減少率)은 당배합(富配合)일수록, 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 크게 나타났다. 3. 기포(起泡)모르터는 보통(普通)시멘트 모르터에 비(比)하여 혼합기포주입형(混合氣泡注入型)은 38.8~55.9%, 사전기포주입형(事前氣泡注入型)은 9.7~23.6%의 자중감소(自重減少)를 보였다. 4. 각(各) 기포(起泡)모르터의 급수율(吸水率)은 빈배합(貧配合)일수록, 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 높게 나타났으며, 흡수율(吸水率)의 증가율(增加率)은 당배합(富配合)일수록, 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 크게 나타났다. 5. 72시간(時間) 수침(水浸)에서 각(各) 기포(氣泡)모르터의 흡수율(吸水率)은 보통(普遇)시멘트 모르터에 비(比)하여 혼합기포주입형(混合氣泡注入型)은 3.41~5.85배(倍)로 나타났으며, 사전기포주입형(事前氣泡注入型)은 1.05~1.55배(倍)로 나타났으며, 흡수율(吸水率)의 변화율(變化率)은 모두 수침초기(水浸初期)에 높게 나타나는 경향(傾向)을 보였다. 6. 각(各) 기포(氣泡)모르터의 각(各) 강도(强度)는 빈배합(貧配合)일수록, 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 작게 나타났으며, 각(各) 강도(强度)의 감소율(減少率)은 빈배합(貧配合)일수록, 기포제(起泡劑)나 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 크게 나타났다. 7. 기포(氣泡)모르터는 보통(普通)시멘트 모르터에 비(比)하여 재령(材齡) 28일(日)에서 혼합기포주입형(混合氣泡注入型)은 77.0~92.8%, 사전기포주입형(事前氣泡注入型)은 36.7~74.4%의 강도감소(强度減少)를 보였고, 각(各) 기포(氣泡)모르터의 각(各) 강도간(强度間)의 상관관계(相關關係)는 직선형(直線形)으로 나타났으며 고도(高度)의 유의성(有意性)이 인정(認定)되었다. 8. 각(各) 기포(氣泡)모르터의 공기량(空氣量)은 빈배합(貧配合)일수록, 기포제(起泡劑)나 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 크게 나타났으며, 공기량(空氣量)이 증가율(增加率)은 당배합(富配合)일수록, 기포제(起泡劑)나 기포(氣泡)의 첨가량(添加量)이 증가(增加)할수록 높게 나타났다. 9. 기포(氣泡)모르터의 공기량(空氣量)은 보통(普通)시멘트 모르터에 비(比)하여 혼합기포주입형(混合氣泡注入型)은 26.0~63.8배(倍), 사전기포주입형(事前氣泡注入型)은 5.8~17.7배(倍)를 보였다. 10. 각(各) 기포(氣泡)모르터에서 밀도(密度)와 흡수율(吸水率), 압축강도(壓縮强度) 및 공기량(空氣量)과의 상관관계(相關關係)는 매우 높은 유의성(有意性)을 보였고, 배합비(配合比)와 기포제(起泡劑) 및 기포(氣泡)의 첨가량(添加量)에 따라 밀도(密度), 흡수율(吸水率), 제강도(諸强度) 및 공기량(空氣量)을 추정(推定)할 수 있는 다중회귀방정식(多重回歸方程式)을 유도(誘導)하였으며 각(各) 방정식(方程式)은 고도(高度)의 유의성(有意性)이 인정(認定)되었다.

• 대한한의학방제학회지
• /
• 제28권4호
• /
• pp.339-349
• /
• 2020

Objectives : Wiryeong-tang (WRT) is a traditional herbal medicine used to treat kidney-related diseases. However, the anti-inflammatory and anti-gastritis effect of Wiryeong-tang was not well known. Therefore, we experimented to confirmed the anti-inflammatory and anti-gastritis effects of Wiryeong-tang. Methods : The RAW 264.7 cells were pre treated with Wiryeong-tang mix soft extract (WRT-mse; 50, 100 and 200 ㎍/mL) for 1 hrs, and then incubated with lipopolysaccharide (LPS; 500 ng/mL). Cell viability was measured by the MTT method, and nitric oxide (NO) was measured with griess reagent. In addition, pro-inflammatory cytokines were measured by enzyme-linked immunosorbent assay (ELISA) and reverse transcription-polymerase chain reaction (RT-PCR). For anti-gastritis effect in vivo, acute gastritis was induced using 150 mM HCl/60% ethanol used ICR mice. WRT-mse (133 mg/kg) was pre treated for 3 days and then treated with 150 mM HCl/60% ethanol 1 hrs later. Then gastritis was observed and inflammatory cytokines in the gastric tissue was measured. Results : The 8 marker components of the WRT-mse were determined by simultaneous analysis using HPLC. WRT-mse was not toxic and inhibited pro-inflammatory cytokines such as IL-1β, IL-6 and TNF-α at NO production, protein and mRNA levels. Also, it was confirmed that WRT-mse improved bleeding and edema in gastritis, and suppresses inflammatory cytokines. Conclusion : In summary, our results suggest that the treatment of the WRT-mse reduced and improved the 150 mM HCl/60% ethanol induced acute gastritis and the inflammation caused by LPS stimulation in RAW 264.7 cells. Therefore, this study may provide useful drug or clinical evidence for WRT-mse to prevent inflammation.

• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.99-106
• /
• 2008

To improve concrete tensile strength and bending strength, New plan that have more economical and simple manufacture process is groped. By an alternative plan, chemical pre-stressed concrete is presented. In this study, we analyzed the rheological properties of cement paste with the kind and replacement ratio of k-type CSA type expansive additives that is used mainly in domestic. and we suggested that the algorithm of a mixing plan in the chemical pre-stressed concrete and from this, we presented the basic report for the right mixing plan. From the results, Flow increased more or less according to use of expansive additives. This phenomenon was observed by increasing paste amount that shows as substitution for expansive additives that specific gravity is smaller than that of cement. As linear regression a result supposing paste that mix expansive additives by Bingham plastic fluid. The shear rate and shear stress expressed high interrelationship. therefore, flow analysis of quantitative was available. The plastic viscosity following to replacement ratio of expansive additives is no change almost, the yield value is decreased in proportion to the added amount of expansive additives. Through this experiment, we could evaluate rheological properties of cement paste using the expansive additives. Hereafter by an additional experiment, we must confirm stability assessment of material separation by using the aggregate with the kind and replacement ratio of expansive additives.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권1호
• /
• pp.279-288
• /
• 2003

This study is the development of method on repairing concrete structure for progressing the durability of reinforced concrete. This method is wet spray method which compress and conduct mortar pre-mixed with polymer powder to hose by high pressure pump and spray it on the section of concrete structure through nozzle made specially. Characters of this method are that materials are selected with the sort of structure and the cause of deterioration and macro pores are removed in repaired section by conducting with high pressure and spraying with high velocity for progressing the durability of concrete structure. This study has carried out that the minimum capacity of rebound was measured with various condition and physical properties of sample made by spray method were estimated in comparing with sample made by previous hand method. Also, properties of long-term have carried out after this method was applied on site. According to experimental study, the capacity of rebound showed below 5% and physical properties of sample made by spray method were superior to that of sample made by hand method and physical and durable properties of long-term showed excellence.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.265-268
• /
• 1999

In this study, we manufactured the ultra-high strength concrete using mineral admixture which is easily workable. From the test results of compressive strength, It is concluded that the proper replacement ratio of silica fume should not exceed to 10% and the replacement of slag is more effective that the replacement of fly ash to gain very high compressive strength. Thermal stress analysis is conducted to find the way of controlling the thermal crack of ultra-high strength concrete. As results of thermal stress analysis, it was found that reducing placing temperature of concrete(pre-cooling) is effective to reduce thermal crack and placing concrete in high air temperature is more effective than placing concrete in low air temperature.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.271-272
• /
• 2009

본 연구에서는 플라이애쉬가 다량 치환된 콘크리트를 현장 적용한 결과에 대하여 보고하고자 한다. 대상 구조물은 설계강도 40MPa인 두께 3m, 2m의 기초이며, 플라이애쉬 치환량은 50%로서 프리믹스 형태의 결합재를 사용하였다. 적용결과로서, 두께 3m 인 기초에서는 약 $39^{\circ}$C, 두께 2m 인 기초에서는 $34^{\circ}$C 의 온도 상승량을 나타내었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.199-200
• /
• 2011

Absorption of lightweight aggregate affects the properties of fresh and hardened concrete, so care must be taken. In this study, according to KS F 2533 absorption is measured to aggregate size, submerged time, holding time and practically ways to maintain a constant absorption was to seek. The findings for quality control of the lightweight aggregate concrete mixture is saturation of the surface-dry aggregate humidity 100% after 24 hours immersion in the environment has been stored for more than two days to absorb the state was able to define. Dry density at the surface of the lightweight aggregate and lightweight concrete mix design and placement is possible for it to apply.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.334-334
• /
• 2011

We applied N-ion bombardment and heat treatment to the Cu thin films deposited on aluminum oxide layer for the enhancement of adhesion. With e-beam evaporation method. $1,000{\AA}$ thick Cu pre-bombardment layer was deposited on the aluminum oxide surface and then N-ion beam was bombared in order to mix the atoms at the film/substrate interface. Additional $4,000{\AA}$-thick Cu film was the coated. Subsequently, the ion mixide Cu on aluminum oxide was annealed at $200^{\circ}C$ and $300^{\circ}C$ in vacuum.