• 대한치과교정학회지
• /
• 제37권6호
• /
• pp.421-431
• /
• 2007

상악 편악 소구치발치에 의한 교정치료는 임상적으로 상당히 많이 행해지고 있는 현실이지만 임상적 활용도에 비하여 그 보고는 희귀하다. 본 연구는 선택적 교정치료로 행해지는 상악 편악 소구치발치에 의한 교정치료 시 치료전후의 상, 하악 절치위치 및 입술위치 변화를 양악 소구치발치에 의한 교정치료의 치료 전후와 비교, 분석하여 편악발치에 의한 교정치료의 진단적 지침을 제시하고 치료 종료 후의 치료결과를 알아보고자 시행되었다. 최근에 교정치료가 종료된 환자 중에서 초진 시 수평피개량이 7 mm 이상을 보이는 증례 중 성공적으로 치료되었다고 판단되는 40증례를 선정하여, 교정치료의 목적으로 상악 제1소구치만을 발치하여 치료한 군(이하 편악발치군; Group 1, 20증례)과 상, 하악 제1소구치를 발치하여 치료한 군(이하 양악발치군; Group 2, 20증례)으로 나누어 치료 전후의 측모 두부방사선 사진을 채득하여 연구재료로 사용하였다. 연구결과 초진 시 편악발치군에서 양악발치군과 비교하여 하악 절치의 위치는 순측경사의 정도가 덜 하였으며 하순의 돌출도도 심하지 않았다. 치료종료 시 편악발치군에서 양악발치군과 비교하여 하악 절치의 위치를 제외한 모든 항목에서 두 군과의 차이는 관찰되지 않았다. 치료 전후의 변화량 비교에서 상, 하악 절치의 이동량은 양악발치군에서 많게 관찰되었으며 하악 절치의 견인에 따라 하순의 돌출도 감소의 양도 양악발치군에서 크게 관찰되었다. 상순의 위치는 두 군간의 차이가 관찰되지 않았다. 큰 수평피개를 갖는 증례에서 적절한 발치 선택을 위한 진단정보의 수집에 있어 상악 절치의 위치 및 상순의 돌출도는 충분한 정보를 제공하지 않았다. 하악 절치의 위치와 하순의 돌출량은 큰 수평피개를 갖는 증례에 있어서 편악발치 혹은 양악발치를 결정하기 위한 적절한 진단적 근거를 제시하였다. 큰 수평피개를 갖고 있는 환자 중 하악 절치의 순측경사가 심하지 않으며 하순의 돌출이 심하지 않은 안모를 갖고 있는 증례의 경우 편악발치에 의해 좋은 치료결과를 얻을 수 있었다.

• 대한치과교정학회지
• /
• 제26권5호
• /
• pp.487-495
• /
• 1996

본 연구는 제 1 소구치 발치로 양호하게 치료된 Class I 전돌 환자의 치료 전 안모 골격 특성과 치료 전후 변화를 조사하여 Class I 전돌 환자의 치료 계획 수립에 이용하고자 하였다. 서울대학교 병원 치과 진료부 교정과에 내원하여 치열궁 길이 부조화의 양이 7.00mm 를 넘지 않고 Class I 전돌 환자로 진단되어 상, 하악 제 1소구치를 발거한 후 동일한 임상가에 의하여 동일 치료 기법으로 양호하게 치료된 환자 35명 (여자 27명, 남자 8명) 을 대상으로 치료 전후 측모 두부 방사선 사진을 계측하여 다음과 같은 결과를 얻었다. 1. 치료 전후 골격 형태는 크게 변하지 않았고 치열, 치조골, 연조직에서 치료 후 유의성 있는 변화가 있었다. 2. 치료 전 골격 형태는 SN-GoGn이 $36.56^{\circ}$, AB-MP이 $66.92^{\circ}$, ODI가 $69.17^{\circ}$, APDI가 $81.31^{\circ}$, CF $150.52^{\circ}$로서 수직적인 부조화 경향을 보였다. 3. 치료 전 치열 형태는 절치간 각이 $113.11^{\circ}$, U1 to FH가 $117.78^{\circ}$, L1 to A-Pog이 7.94mm 였으며 연조직 측모상 E line에 대하여 상순이 2.88mm, 하순이 5.43mm 돌출되어 있었다. 4. 치료 후 치열 형태는 절치간 각이 $14.46^{\circ}$ 증가되었으며 연조직 측모상 E line에 대하여 상순이 2.45mm, 하순이 3.2mm후방이동되었다. (P<0.001 ) 5. 치료 전 발치 지수 (EI)는 138.71이었고 치료 후 EI는 148.2였다.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2002년도 춘계 국제 학술대회
• /
• pp.16-19
• /
• 2002

This study was carried out to establish the standardized analysis method in order to decide accurate concentrations of hazardous metals in the air. Acid decomposition method used usually was compared to microwave digestion method. Comparing results of tested background concentration in blank filter, we found that the magnitude of element concentration was Na, Ca, K, Mg, Al and Ba by order. The element concentrations of Glass fiber filter were higher than those of Quartz fiber filter, and the number of undetected components in Glass fiber filter was lower than that in Quartz fiber filter. Thus it is supposed that the concentration of background elements in Glass fiber filter was higher than those in Quartz fiber filter The extraction rate of microwave digestion method was superior to those of acid decomposition method during the test of blank filter as well as SRM of NIST. In case of the SRM of NIST, the average extraction efficiency of acid decomposition Method and microwave pretreatment is 53.8∼82.7％, 81.3∼97.1％, respectively. This result might be caused by the closed system of Microwave, which make outflow and loss of components less. Also microwave digestion method has other merits such as the minimization of time, reagents, and contamination. Furthermore, if the extraction condition, extraction time and used acids are optimized, the better results will be represented.

• 한국동물위생학회지
• /
• 제28권3호
• /
• pp.285-294
• /
• 2005

This study was conducted to investigate the extraction method for the determination of organochlorine, organophosphorus and synthetic pyrethroid pesticide residues in beef fat by gas chromatography-mass selective detector(GC-MSD). Twenty one pesticide residues in fat were determined using a simple and rapid procedure based on solid- phase extraction(SPE) clean-up cartridges with octadecyl $(C_{18})-bonded$ porous silica, florisil, $10\%$ deactivated florisil. a tandem $C_{18}$ and florisil and a tandem $C_{18}$ and $10\%$ deactivated florisil. Solvent-solvent extraction using acetonitrile was not satisfied to eliminate fat interference for pesticide residue analysis by GC-MSD, and the recoveries of the method in fat ranged from 16.2 to $57.3\%$ except DDT$(83.2\%)$. The recoveries of SPE methods using a tandem $C_{18}$ and Florisil was $59.6\~123.8\%$ except fenitrothion $(135.2\%)$. the SPE method was verified the satisfactory performance of pre-treatment for pesticide residues analysis in fat by GC-MSD. The efficiency of florisil deactivated with $10\%$ water has been not proved significantly on recoveries of pesticide residues in fat.

• 대한원격탐사학회지
• /
• 제8권2호
• /
• pp.105-123
• /
• 1992

A study was made on the feature extraction for non-metallic one deposits and their related geology using the Remote Sensing and Airborne Radiometric data. The area chosen is around the Haenam area, where dickite and Quarzite mines are distributed in. The geology of the area consists mainly of Cretaceous volcanics and PreCambrian metamorphic. The methods applied are study on the reflectance characteristics of minerals and rocks sampled in the study area, and the feature extraction extraction of histogram normalized images for Landsat TM and Airborne Radiometric data, and finally evaluation of applicability of some useful pattern recognition techniques for regional lithological mapping. As a result, reflectances of non-metallic minerals are much higher than rock samples in the area. However, low grade dickites are slightly higher than rock samples, probably due to their greyish colour and also their textural features which may scatter the reflectance and may be capable of capturing much hychoryl ions. The reflectances of rock samples may depend on the degree of whiteness of samples. The outcrops or mine dumps in the study area were most effectively extracted on the histogram normalized image of TM Band 1, 2 and 3, due to their high reflectivity. The Masking technique using the above bands may be the most effective and the natural colour composite may provide some success as well. The colour composite image of PCA may also be effective in extracting geological features, and airborne radiometric data may be useful to some degree as an complementary tool.

• Journal of Information Processing Systems
• /
• 제17권5호
• /
• pp.947-959
• /
• 2021

Aiming at the problem of low accuracy in the water boundary automatic extraction of islands from GF-2 remote sensing image with high resolution in three bands, new water edges automatic extraction method in island based on GF-2 remote sensing images, genetic algorithm (GA) method, is proposed in this paper. Firstly, the GA-OTSU threshold segmentation algorithm based on the combination of GA and the maximal inter-class variance method (OTSU) was used to segment the island in GF-2 remote sensing image after pre-processing. Then, the morphological closed operation was used to fill in the holes in the segmented binary image, and the boundary was extracted by the Sobel edge detection operator to obtain the water edge. The experimental results showed that the proposed method was better than the contrast methods in both the segmentation performance and the accuracy of water boundary extraction in island from GF-2 remote sensing images.

• Journal of Information Processing Systems
• /
• 제19권1호
• /
• pp.109-117
• /
• 2023

Defect detection is one of the key factors in fabric quality control. To improve the speed and accuracy of denim fabric defect detection, this paper proposes a defect detection algorithm based on cascading feature extraction architecture. Firstly, this paper extracts these weight parameters of the pre-trained VGG16 model on the large dataset ImageNet and uses its portability to train the defect detection classifier and the defect recognition classifier respectively. Secondly, retraining and adjusting partial weight parameters of the convolution layer were retrained and adjusted from of these two training models on the high-definition fabric defect dataset. The last step is merging these two models to get the defect detection algorithm based on cascading architecture. Then there are two comparative experiments between this improved defect detection algorithm and other feature extraction methods, such as VGG16, ResNet-50, and Xception. The results of experiments show that the defect detection accuracy of this defect detection algorithm can reach 94.3% and the speed is also increased by 1-3 percentage points.

• 한국측량학회지
• /
• 제35권6호
• /
• pp.485-494
• /
• 2017

본 연구는 단순 전처리 방법과 수정된 지역적 피쳐 추출기법을 이용하여 특성이 다른 적외선영상 자동 기하보정에 초점을 맞추고 있다. 입력영상은 히스토그램 평활화를 통해 중앙값과 절댓값을 이용하여 전처리를 수행하였으며, 추출 피쳐의 유사도를 거리가 아닌 각 개념으로 변경하여 적용함으로써, 영상간 밝기값 차이를 줄이는데 효과적으로 적용할 수 있도록 하였다. 기하보정 결과는 시각적인 방법과 Inverse RMSE 방식을 사용하여 평가하였으며, 영상의 특성 차이로 인해 기존의 지역적 피쳐 추출기법 적용으로 해결될 수 없었던 자동 기하보정이 본 알고리즘을 적용함으로써 높은 정합 신뢰도와 적용 편의성을 보임을 확인할 수 있었다. 이를 통해, 제안 방법이 특정 조건의 다중 센서 영상간 자동 기하보정 기법 중 하나로 사용될 수 있을 것으로 기대한다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제27권4호
• /
• pp.349-352
• /
• 2001

Dental laser provides many advantages to the clinicians. Those are excellent hemostatic effect, good operating sight, minimal adjacent tissue injury, reduction of postoperative swelling & pain, reduction of postoperative infection, reduction of scar tissue & contraction, etc. The purpose of this study is to observe how these advantages work after surgical extraction of impacted third molar. From march 2000 to july 2000, we have randomly divided the patients who had been surgically extracted unilateral impacted third molar into two groups. The first group comprised $CO_2$ laser illumination with 3 watts, defocusing & continuous mode, rotating motion for about 3 minutes after finishing of surgical extraction & suture. The other group patients were not irradiated. The medications in two groups were same. We measured pain, swelling and trismus three times(pre-operation, first day after operation, and 7th day after operation). The number of the patients who had measured three times all are 64, laser irradiated groups are 36 and non-irradiated groups are 28. The age ranged from 19 to 50, with a mean of 27.9 years. The operative time ranged from 3 minutes to 50 minutes, with a mean of 12.1 minutes. In the $CO_2$ laser group, the pain intensity of the 7th day after operation was still increased significantly comparing with that of the pre-operation and the distance which were measured for the swelling was different significantly. In the other group, the mouth opening limitation was still decreased significantly.

• Journal of Ecology and Environment
• /
• 제30권3호
• /
• pp.271-276
• /
• 2007

A simple and efficient protocol was developed for culturing Cu-tolerant and Cu-accumulating plants via pre-adaptation to Cu during plant tissue culture. We induced multiple shoots from begonia (Begonia evansiana Andr.) leaf explants on MS medium supplemented with naphtaieneacetic acid and benzyladenine. After 3 months, small plantlets were transferred to MS medium supplemented with $100{\mu}M\;CuCl_2$ for pre-adaptation to Cu and cultured for 5 months. Then, these plantlets were individually planted in pots containing artificial soil. An additional 500 mg of Cu dissolved in 1/4 strength MS solution was applied to each pot during irrigation over the course of 2 months. We planted pre-adapted and control begonias in soil from the II-Kwang Mine, an abandoned Cu mine in Pusan, Korea, to examine their ability to tolerate and accumulate Cu for phytore-mediation. Pre-adapted begonias accumulated $1,200{\mu}g$ Cu/g dry root tissue over the course of 45 days. On the other hand, non-Cu-adapted controls accumulated only $85{\mu}g$ Cu/g dry root tissue. To enhance Cu extraction, chelating agents, ethylenediamine tetraacetic acid (EDTA)-dipotassiun and pyridine-2,6-dicarboxylic acid (PDA), were applied. While the chelating agents did not enhance accumulation of Cu in the roots of control begonias, EDTA application increased the level of Cu in the roots of pre-adapted begonias twofold (to $2,500{\mu}g$ Cu/g dry root tissue). Because pre-adapted begonias accumulated a large amount of Cu, mainly in their roots, they could be used for phytostabilization of Cu-contaminated soils. In addition, as a flowering plant, begonias can be used to create aesthetically pleasing remediation sites.